Summary
This update for chrony fixes the following issues:
Chrony was updated to 4.1:
* Add support for NTS servers specified by IP address (matching
Subject Alternative Name in server certificate)
* Add source-specific configuration of trusted certificates
* Allow multiple files and directories with trusted certificates
* Allow multiple pairs of server keys and certificates
* Add copy option to server/pool directive
* Increase PPS lock limit to 40% of pulse interval
* Perform source selection immediately after loading dump files
* Reload dump files for addresses negotiated by NTS-KE server
* Update seccomp filter and add less restrictive level
* Restart ongoing name resolution on online command
* Fix dump files to not include uncorrected offset
* Fix initstepslew to accept time from own NTP clients
* Reset NTP address and port when no longer negotiated by NTS-KE
server
- Update clknetsim to snapshot f89702d.
- Ensure the correct pool packages are installed for openSUSE and SLE (bsc#1180689).
- Enable syscallfilter unconditionally (bsc#1181826).
Chrony was updated to 4.0:
Enhancements
- Add support for Network Time Security (NTS) authentication
- Add support for AES-CMAC keys (AES128, AES256) with Nettle
- Add authselectmode directive to control selection of
unauthenticated sources
- Add binddevice, bindacqdevice, bindcmddevice directives
- Add confdir directive to better support fragmented
configuration
- Add sourcedir directive and 'reload sources' command to
support dynamic NTP sources specified in files
- Add clockprecision directive
- Add dscp directive to set Differentiated Services Code Point
(DSCP)
- Add -L option to limit log messages by severity
- Add -p option to print whole configuration with included
files
- Add -U option to allow start under non-root user
- Allow maxsamples to be set to 1 for faster update with -q/-Q
option
- Avoid replacing NTP sources with sources that have
unreachable address
- Improve pools to repeat name resolution to get 'maxsources'
sources
- Improve source selection with trusted sources
- Improve NTP loop test to prevent synchronisation to itself
- Repeat iburst when NTP source is switched from offline state
to online
- Update clock synchronisation status and leap status more
frequently
- Update seccomp filter
- Add 'add pool' command
- Add 'reset sources' command to drop all measurements
- Add authdata command to print details about NTP
authentication
- Add selectdata command to print details about source
selection
- Add -N option and sourcename command to print original names
of sources
- Add -a option to some commands to print also unresolved
sources
- Add -k, -p, -r options to clients command to select, limit,
reset data
- Bug fixes
- Don’t set interface for NTP responses to allow asymmetric
routing
- Handle RTCs that don’t support interrupts
- Respond to command requests with correct address on
multihomed hosts
- Removed features
- Drop support for RIPEMD keys (RMD128, RMD160, RMD256, RMD320)
- Drop support for long (non-standard) MACs in NTPv4 packets
(chrony 2.x clients using non-MD5/SHA1 keys need to use
option 'version 3')
- By default we don't write log files but log to journald, so
only recommend logrotate.
- Adjust and rename the sysconfig file, so that it matches the
expectations of chronyd.service (bsc#1173277).
Chrony was updated to 3.5.1:
* Create new file when writing pidfile (CVE-2020-14367, bsc#1174911)
- Add chrony-pool-suse and chrony-pool-openSUSE subpackages that
preconfigure chrony to use NTP servers from the respective
pools for SUSE and openSUSE (bsc#1156884, SLE-11424).
- Add chrony-pool-empty to still allow installing chrony without
preconfigured servers.
- Use iburst in the default pool statements to speed up initial
synchronisation (bsc#1172113).
- Update clknetsim to version 79ffe44 (fixes bsc#1162964).
Update to 3.5:
+ Add support for more accurate reading of PHC on Linux 5.0
+ Add support for hardware timestamping on interfaces with read-only timestamping configuration
+ Add support for memory locking and real-time priority on FreeBSD, NetBSD, Solaris
+ Update seccomp filter to work on more architectures
+ Validate refclock driver options
+ Fix bindaddress directive on FreeBSD
+ Fix transposition of hardware RX timestamp on Linux 4.13 and later
+ Fix building on non-glibc systems
- Fix location of helper script in chrony-dnssrv@.service (bsc#1128846).
- Read runtime servers from /var/run/netconfig/chrony.servers (bsc#1099272)
- Move chrony-helper to /usr/lib/chrony/helper, because there should be no executables in /usr/share.
- Remove discrepancies between spec file and chrony-tmpfiles (bsc#1115529)
Update to version 3.4
* Enhancements
+ Add filter option to server/pool/peer directive
+ Add minsamples and maxsamples options to hwtimestamp directive
+ Add support for faster frequency adjustments in Linux 4.19
+ Change default pidfile to /var/run/chrony/chronyd.pid to allow chronyd
without root privileges to remove it on exit
+ Disable sub-second polling intervals for distant NTP sources
+ Extend range of supported sub-second polling intervals
+ Get/set IPv4 destination/source address of NTP packets on FreeBSD
+ Make burst options and command useful with short polling intervals
+ Modify auto_offline option to activate when sending request failed
+ Respond from interface that received NTP request if possible
+ Add onoffline command to switch between online and offline state
according to current system network configuration
+ Improve example NetworkManager dispatcher script
* Bug fixes
+ Avoid waiting in Linux getrandom system call
+ Fix PPS support on FreeBSD and NetBSD
Update to version 3.3
* Enhancements:
+ Add burst option to server/pool directive
+ Add stratum and tai options to refclock directive
+ Add support for Nettle crypto library
+ Add workaround for missing kernel receive timestamps on Linux
Fixed packages 13
| Release | Package | Fixed in |
|---|---|---|
| SUSE · HPE Helion OpenStack 8 | chrony | 4.1-5.9.1 |
| SUSE · SLES 12 SP2 Linux Enterprise Server 12 SP2-BCL | chrony | 4.1-5.9.1 |
| SUSE · SLES 12 SP3 Linux Enterprise Server 12 SP3-BCL | chrony | 4.1-5.9.1 |
| SUSE · SLES 12 SP3 Linux Enterprise Server 12 SP3-LTSS | chrony | 4.1-5.9.1 |
| SUSE · SLES 12 SP4 Linux Enterprise Server 12 SP4-LTSS | chrony | 4.1-5.9.1 |
| SUSE · SLES 12 SP5 Linux Enterprise Server 12 SP5 | chrony | 4.1-5.9.1 |
| SUSE · SLES for SAP 12 SP3 Linux Enterprise Server for SAP Applications 12 SP3 | chrony | 4.1-5.9.1 |
| SUSE · SLES for SAP 12 SP4 Linux Enterprise Server for SAP Applications 12 SP4 | chrony | 4.1-5.9.1 |
| SUSE · SLES for SAP 12 SP5 Linux Enterprise Server for SAP Applications 12 SP5 | chrony | 4.1-5.9.1 |
| SUSE · OpenStack Cloud 8 | chrony | 4.1-5.9.1 |
| SUSE · OpenStack Cloud 9 | chrony | 4.1-5.9.1 |
| SUSE · OpenStack Cloud Crowbar 8 | chrony | 4.1-5.9.1 |
| SUSE · OpenStack Cloud Crowbar 9 | chrony | 4.1-5.9.1 |
Vulnerabilities 1
-
Unscored —
A flaw was found in chrony versions before 3.5.1 when creating the PID file under the /var/run/chrony folder. The file …
References
-
report
https://bugzilla.suse.com/1063704
-
report
https://bugzilla.suse.com/1069468
-
report
https://bugzilla.suse.com/1082318
-
report
https://bugzilla.suse.com/1083597
-
report
https://bugzilla.suse.com/1099272
-
report
https://bugzilla.suse.com/1115529
-
report
https://bugzilla.suse.com/1128846
-
report
https://bugzilla.suse.com/1156884
-
report
https://bugzilla.suse.com/1159840
-
report
https://bugzilla.suse.com/1161119
-
report
https://bugzilla.suse.com/1162964
-
report
https://bugzilla.suse.com/1171806
-
report
https://bugzilla.suse.com/1172113
-
report
https://bugzilla.suse.com/1173277
-
report
https://bugzilla.suse.com/1173760
-
report
https://bugzilla.suse.com/1174075
-
report
https://bugzilla.suse.com/1174911
-
report
https://bugzilla.suse.com/1180689
-
report
https://bugzilla.suse.com/1181826
-
report
https://bugzilla.suse.com/1183783
-
report
https://bugzilla.suse.com/1184400
-
report
https://bugzilla.suse.com/1187906
-
report
https://bugzilla.suse.com/1190926
-
web
https://www.suse.com/security/cve/CVE-2020-14367