Skip to content
OpenAdvisories
Unscored SUSE-SU-2026:23054-1 0 CVEs

Security update for multipath-tools

Published Aug 6, 2026 · Updated Aug 12, 2026

Summary

This update for multipath-tools fixes the following issues:

Update to version 0.9.8+292+suse.c0523c1.

Security issues fixed:

- kpartx: integer overflow in the GPT partition table size calculation can lead to heap OOB read via crafted USB device
or disk image(bsc#1268145).
- kpartx: missing bounds check can lead to a DASD VOL1 unbounded array write via a crafted DASD disk with more than 256
consecutive format labels (bsc#1268144).

Other updates and bugfixes:

- [Build 32.2] System with multipath fails to boot during first boot during the installation (bsc#1232063).
- [Build 50.1] multipath btrfs i/o error on both Leap 15.6 and SLES 15 SP6 (bsc#1219289).
- Fix code that leads to `is_bit_set_in_bitfield: bitfield overflow: 1 >= 0` message showing up in syslog
(bsc#1255285).
- Version 0.9.8+266+suse.53479977 (bsc#1257007):
* kpartx: fix segfault when operating on regular files (bsc#1257244, bsc#1257153)
* multipathd: print path offline message even without a checker (bsc#1254094)
* Fix command descriptions in the multipathd man page.
* Fix ISO C23 compatibility issue causing errors with new compilers.
* Fix memory leak caused by not joining the "init unwinder" thread.
* Fix memory leaks in kpartx.
* Print the warning "setting scsi timeouts is unsupported for protocol" only once per protocol.
* Make sure multipath-tools is compiled with the compiler flag `-fno-strict-aliasing`.
(gh#opensvc/multipath-tools#130, bsc#1255285)
- Version 0.9.8+247+suse.863ae86f:
* Log offline path state if "log_checker_err always" is set
- Version 0.9.8+246+suse.fb81edd2:
* CI: GitHub workflow updates. No code changes.
- Version 0.9.8+166+suse.95399ce1:
- Backported fixes from upstream 0.9.9 ... 0.10.5 (bsc#1253260)
* Updates to the built-in hardware table:
- add some NVMe storage array (VASTData, Infinidat, HITACHI VSP)
- add QSAN
- add EqualLogic PS
- Add Quantum devices
- Enable ALUA for AStor/NeoSapphire
- Update NFINIDAT/InfiniBox config
- Fix product blacklist of S/390 devices
- Add Seagate Lyve
- Add HITACHI VSP One SDS Block
- Add SCST (SCSI Target Subsystem for Linux)
- Huawei storage arrays
- XSG1 vendors
* Avoid a possible system hang during shutdown with queueing multipath maps.
* Failed paths should be checked every `polling_interval`. In certain cases,
this wouldn't happen, because the check interval wasn't reset by multipathd.
* It could happen that multipathd would accidentally release a SCSI persistent
reservation held by another node. Fix it.
* After manually failing some paths and then reinstating them, sometimes
the reinstated paths were immediately failed again by multipathd.
* Fixed the problem that, if there were multiple maps with deferred failback
(`failback` value > 0 in `multipath.conf`), some maps might fail back later
than configured.
* Fixed a problem in the marginal path detection algorithm that could cause
the io error check for a recently failed path to be delayed.
* Fixed a minor bug in the config file parser
* Fixed minor issues detected by coverity.
- Version 0.9.8+111+suse.b7ee850:
- Backported bug fixes from upstream 0.9.9 - 0.10.2
* Fixed old mpathpersist bug leading to the error message "configured reservation
key doesn't match: 0x0" when `reservation_key` was configured in the
multipaths section of `multipath.conf`. (bsc#1228926, gh#opensvc/multipath-tools#92)
* Fixed bug that caused queueing to be always disabled if flushing a map failed
(bug introduced in 0.9.8). (bsc#1229898)
* Fixed output of `multipath -t` and `multipath -T` for the options
`force_sync` and `retrigger_tries`. (bsc#1229898, gh#opensvc/multipath-tools#88)
* libmultipath: don't print error message if WATCHDOG_USEC is 0 (bsc#1232227)
* Fix map failure count for no_path_retry > 0 (bsc#1229898)
* Fix reboot hang if uevent is processed for suspended device (bsc#1232063)
* libmultipath: don't set dev_loss_tmo to 0 for NO_PATH_RETRY_FAIL (bsc#1229898)
* Fixed a memory leak in the nvme foreign library. (bsc#1229898, bsc#1236390)
* Fix multipathd crash because of invalid path group index value, for example if an invalid
path device was removed from a map. (gh#opensvc/multipath-tools#105, bsc#1236392)
* Fix the problem that `group_by_tpg` might be disabled if one or more
paths were offline during initial configuration (bsc#1236392)
* Make sure udev and systemd notice changes in multipath path state
when devices are added to or removed from multipath maps (bsc#1236321)
- Version 0.9.8+88+suse.d504d83:
* Revert "libmultipath: fix max_sectors_kb on adding path" (bsc#1222458)
- Update to version 0.9.8+87+suse.f72b9f3:
* fix misspelled DM_UDEV_DISABLE_OTHER_RULES_FLAG in udev rules (bsc#1220810)
- Remove libmpathpersist-example-old.c, which has been obsolete since multipath-tools 0.8.6.
- Version 0.9.8+83+suse.bcae610 (bsc#1220374):
* multipath-tools: added NEWS.md
- Version 0.9.8~1+82+suse.dcd98a3:
* Adapt package version such that it shows as a 0.9.8 prerelease
* Add missing udev rules file
- Version 0.9.7+148+suse.9780ae0:
* 11-dm-mpath.rules: Fix quoting mistake (bsc#1219142)
- Version 0.9.7+148+suse.7d9953e.obscpio
* This is a multipath-tools 0.9.8 pre-release
* fix fast_io_fail for Infinibox (bsc#1219348)
* Fix activation of LVM volume groups during coldplug (bsc#1219142)
- Version 0.9.7+140+suse.2d78457:
* Socket activation via multipathd.socket has been disabled by default
because it has undesirable side effects on systems without multipath.
Users with multipath hardware should enable multipathd.service
* The restorequeueing CLI command now only enables queueing if
disablequeueing had been sent before
* Avoid multipathd hang during map flush
* multipathd now tracks the queueing mode of maps in its internal fea

Fixed packages 1

ReleasePackageFixed in
SUSE · SLE Micro 6.0 Linux Micro 6.0 multipath-tools 0.9.8+292+suse.c0523c1-1.1

References

  • report
    https://bugzilla.suse.com/1212854
  • report
    https://bugzilla.suse.com/1213265
  • report
    https://bugzilla.suse.com/1213809
  • report
    https://bugzilla.suse.com/1217377
  • report
    https://bugzilla.suse.com/1218326
  • report
    https://bugzilla.suse.com/1219142
  • report
    https://bugzilla.suse.com/1219289
  • report
    https://bugzilla.suse.com/1219348
  • report
    https://bugzilla.suse.com/1219796
  • report
    https://bugzilla.suse.com/1220374
  • report
    https://bugzilla.suse.com/1220810
  • report
    https://bugzilla.suse.com/1222458
  • report
    https://bugzilla.suse.com/1228926
  • report
    https://bugzilla.suse.com/1229898
  • report
    https://bugzilla.suse.com/1232063
  • report
    https://bugzilla.suse.com/1232227
  • report
    https://bugzilla.suse.com/1236321
  • report
    https://bugzilla.suse.com/1236390
  • report
    https://bugzilla.suse.com/1236392
  • report
    https://bugzilla.suse.com/1253260
  • report
    https://bugzilla.suse.com/1254094
  • report
    https://bugzilla.suse.com/1255285
  • report
    https://bugzilla.suse.com/1257007
  • report
    https://bugzilla.suse.com/1257153
  • report
    https://bugzilla.suse.com/1257244
  • report
    https://bugzilla.suse.com/1268144
  • report
    https://bugzilla.suse.com/1268145