Summary
This update for multipath-tools fixes the following issues:
Update to version 0.10.7~1+211+suse.18f1559.
Security issues fixed:
- kpartx: integer overflow in the GPT partition table size calculation can lead to heap OOB read via crafted USB device
or disk image(bsc#1268145).
- kpartx: missing bounds check can lead to a DASD VOL1 unbounded array write via a crafted DASD disk with more than 256
consecutive format labels (bsc#1268144).
Other updates and bugfixes:
- Fix system with multipath failing to boot during first boot during the installation (bsc#1232063).
- Fix code that leads to `is_bit_set_in_bitfield: bitfield overflow: 1 >= 0` message showing up in syslog
(bsc#1255285).
- Version 0.10.7~1+211+suse.18f1559:
* Fix ALUA asymmetric access state descriptions in multipathd logs, so that
the same terms are used as by the kernel ("lba-dependent", "transitioning").
* Don't set a hardware handler for bio-based multipath devices. The kernel
rejects this anyway.
* Fix WWID detection for legacy devices that use the older SCSI-2 VPD page
0x83 format for their device identifier.
* Fix duplicate "checker timed out" log messages when `log_checker_err` is
set to `once`. (bsc#1254094)
* Avoid potential buffer overflows in the iet and datacore prioritizers.
* iet prioritizer: avoid misleading error message with systemd 256 and
newer, and properly use udev to derive path parameters.
(gh#opensvc/multipath-tools#145)
- Version 0.10.6+201+suse.9f189e79:
* libmultipath: reduce log level of "map X has no targets" (bsc#1257476)
- Version 0.10.6+200+suse.547788f4 (bsc#1257007):
* kpartx: fix segfault when operating on regular files (bsc#1257244, bsc#1257153)
* multipathd: print path offline message even without a checker
(bsc#1254094)
* Fix command descriptions in the multipathd man page.
* Fix ISO C23 compatibility issue causing errors with new compilers.
* Fix memory leak caused by not joining the "init unwinder" thread.
* Fix memory leaks in kpartx.
* Print the warning "setting scsi timeouts is unsupported for protocol" only
once per protocol.
* Make sure multipath-tools is compiled with the compiler flag
`-fno-strict-aliasing`. (gh#opensvc/multipath-tools#130, bsc#1255285)
- Version 0.10.5+213+suse.04c3a0ac:
* Log offline path state if "log_checker_err always" is set
* mpathpersist: Fix REPORT CAPABILITIES output
- Version 0.10.5+190+suse.a9f87040:
* CI: GitHub workflow updates. No code changes.
- _service: switched to tar_scm for git LFS.
- Version 0.10.5+125+suse.1ed79487:
- Fixes from upstream 0.10.5 (see also NEWS.md) (bsc#1253260)
* Improved the communication with **udev** and **systemd** by triggering
uevents when path devices are added to or removed from multipath maps,
or when `multipathd reconfigure` is executed after changing blacklist
directives in `multipath.conf`.
* Failed paths should be checked every `polling_interval`. In certain cases,
this wouldn't happen, because the check interval wasn't reset by multipathd.
* It could happen that multipathd would accidentally release a SCSI persistent
reservation held by another node. Fix it.
* After manually failing some paths and then reinstating them, sometimes
the reinstated paths were immediately failed again by multipathd. Fix it.
* Various minor fixes reported by coverity.
- Version 0.10.3+124+suse.ed5b4b11:
* multipath-tools: add HPE MSA Gen7 (2070/2072) to hwtable (bsc#1246501)
- Version 0.10.2+123+suse.48d66ee8:
* multipathd: cli_reinstate(): avoid reinstated paths being failed again
(bsc#1244917)
- Version 0.10.2+122+suse.51e02cc:
* multipathd: fix hang during shutdown with queuing maps
(bsc#1238484).
* This adds multipathd-queueing.service.
- Version 0.10.2+117+suse.33411aa:
* multipathd: trigger uevents for blacklisted paths in reconfigure
(bsc#1236321)
* Make sure maps are reloaded in the path checker loop after detecting an
inconsistent or wrong kernel state (bsc#1236392)
* Make sure udev and systemd notice changes in multipath path state
when devices are added to or removed from multipath maps (bsc#1236321)
* Fix the problem that `group_by_tpg` might be disabled if one or more
paths were offline during initial configuration (bsc#1236392)
* Fix multipathd crash because of invalid path group index value, for example
if an invalid path device was removed from a map.
(gh#opensvc/multipath-tools#105, bsc#1236392)
* Fixed a memory leak in the nvme foreign library.
* Fixed a problem in the marginal path detection algorithm that could cause
the io error check for a recently failed path to be delayed.
(bsc#1236390)
* Reduce log level of harmless "map ... doesn't exist" message
- Version 0.10.1~2+112+suse.b66763a:
* libmultipath: reduce log level of "map X has multiple targets"
(bsc#1233588)
- Version 0.10.1~1+113+suse.d6eca5e:
* This is a pre-release of the upstream stable release 0.10.1.
* libmultipath: dm_get_maps(): don't bail out for single-map failures
(bsc#1233588, gh#opensvc/multipath-tools#102)
* libmultipath: don't print error message if WATCHDOG_USEC is 0
(bsc#1232227)
* libmultipath: don't set dev_loss_tmo to 0 for NO_PATH_RETRY_FAIL
* multipathd: fix deferred_failback_tick for reload removes
- Version 0.10.0+108+suse.2c2e597:
* Update fix for bsc#1232063 to upstream-accepted solution
- Version 0.10.0+106+suse.ffbdb7a:
* Fix reboot hang if uevent is processed for suspended device
(bsc#1232063)
Fixed packages 1
| Release | Package | Fixed in |
|---|---|---|
| SUSE · SLE Micro 6.1 Linux Micro 6.1 | multipath-tools | 0.10.7~1+211+suse.18f1559-slfo.1.1_1.1 |
References
-
report
https://bugzilla.suse.com/1232063
-
report
https://bugzilla.suse.com/1232227
-
report
https://bugzilla.suse.com/1233588
-
report
https://bugzilla.suse.com/1236321
-
report
https://bugzilla.suse.com/1236390
-
report
https://bugzilla.suse.com/1236392
-
report
https://bugzilla.suse.com/1238484
-
report
https://bugzilla.suse.com/1244917
-
report
https://bugzilla.suse.com/1246501
-
report
https://bugzilla.suse.com/1253260
-
report
https://bugzilla.suse.com/1254094
-
report
https://bugzilla.suse.com/1255285
-
report
https://bugzilla.suse.com/1257007
-
report
https://bugzilla.suse.com/1257153
-
report
https://bugzilla.suse.com/1257244
-
report
https://bugzilla.suse.com/1257476
-
report
https://bugzilla.suse.com/1268144
-
report
https://bugzilla.suse.com/1268145