Weakness (CWE)
CWE-416: Use After Free
The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
How to prevent it (2 mitigations)
-
Architecture and Design
Choose a language that provides automatic memory management.
-
Implementation
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
Source: MITRE CWE-416
6,545 results · Feed
-
High 7.4CVE-2024-4610 Exploited
Mali GPU Kernel Driver allows improper GPU memory processing operations
Use After Free vulnerability in Arm Ltd Bifrost GPU Kernel Driver, Arm Ltd Valhall GPU Kernel Driver allows a local non-privileged user to make improper GPU memory processing operations to gain access to already freed memory.This issue affects Bifrost GPU Ker…
KEV Jun 12, 2024 -
High 8.4
An issue was discovered in Samsung Mobile Processor and Wearable Processor Exynos 850, Exynos 1080, Exynos 2100, Exynos…
-
High 8.8
Sonos Era 100 SMB2 Message Handling Use-After-Free Remote Code Execution Vulnerability
Sonos Era 100 SMB2 Message Handling Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Sonos Era 100 smart speakers. Authentication is not required to…
-
High 7.8
Luxion KeyShot Viewer KSP File Parsing Use-After-Free Remote Code Execution Vulnerability
Luxion KeyShot Viewer KSP File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Luxion KeyShot Viewer. User interaction is required to exploit this vu…
-
Medium 5.9
Envoy affected by a crash in EnvoyQuicServerStream::OnInitialHeadersComplete()
Envoy is a cloud-native, open source edge and service proxy. A crash was observed in `EnvoyQuicServerStream::OnInitialHeadersComplete()` with following call stack. It is a use-after-free caused by QUICHE continuing push request headers after `StopReading()` b…
-
Medium 5.9
Envoy affected by a crash (use-after-free) in EnvoyQuicServerStream
Envoy is a cloud-native, open source edge and service proxy. There is a use-after-free in `HttpConnectionManager` (HCM) with `EnvoyQuicServerStream` that can crash Envoy. An attacker can exploit this vulnerability by sending a request without `FIN`, then a `R…
-
Medium 6.7
Use After Free in Audio
Memory corruption when IPC callback handle is used after it has been released during register callback by another thread.
-
Medium 6.7
Use After Free in Audio
Memory corruption in Audio during a playback or a recording due to race condition between allocation and deallocation of graph object.
-
High 7.5
libmodbus v3.1.6 was discovered to contain a use-after-free via the ctx->backend pointer. This vulnerability allows att…
-
Medium 5.4
Use after free in Presentation API in Google Chrome prior to 125.0.6422.141 allowed a remote attacker to potentially ex…
-
High 7.5
Use after free in Dawn in Google Chrome prior to 125.0.6422.141 allowed a remote attacker to potentially exploit heap c…
-
High 7.5
Use after free in Dawn in Google Chrome prior to 125.0.6422.141 allowed a remote attacker to potentially exploit heap c…
-
High 7.5
Use after free in Media Session in Google Chrome prior to 125.0.6422.141 allowed a remote attacker to execute arbitrary…
-
Critical 9.8CVE-2024-36886 Public exploit
tipc: fix UAF in error path
In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in error path Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported a UAF in the tipc_buf_append() error path: BUG: KASAN: slab-use-after-free in kfree_skb_list…
-
Medium 5.3
NGINX HTTP/3 QUIC vulnerability
When NGINX Plus or NGINX OSS are configured to use the HTTP/3 QUIC module and the network infrastructure supports a Maximum Transmission Unit (MTU) of 4096 or greater without fragmentation, undisclosed QUIC packets can cause NGINX worker processes to leak pre…
-
High 7.3
Incorrect access control in the account management function of web interface in Aten PE6208 2.3.228 and 2.4.232 allows …
-
High 8.8
Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect() Extend a critical section to prevent chan from early freeing. Also make the l2cap_connect() return type void. Nothing is using the…
-
High 8.8
Use after free in Scheduling in Google Chrome prior to 125.0.6422.76 allowed a remote attacker to execute arbitrary cod…
-
High 8.4
can: peak_pci: peak_pci_remove(): fix UAF
In the Linux kernel, the following vulnerability has been resolved: can: peak_pci: peak_pci_remove(): fix UAF When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log …
-
Medium 6.2
fbdev: imsttfb: fix a resource leak in probe
In the Linux kernel, the following vulnerability has been resolved: fbdev: imsttfb: fix a resource leak in probe I've re-written the error handling but the bug is that if init_imstt() fails we need to call iounmap(par->cmap_regs).
-
Medium 4.4
wifi: ath11k: fix htt pktlog locking
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix htt pktlog locking The ath11k active pdevs are protected by RCU but the htt pktlog handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critica…
-
High 8.8
wifi: ath11k: fix dfs radar event locking
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix dfs radar event locking The ath11k active pdevs are protected by RCU but the DFS radar event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-si…
-
High 7.8
smb: client: fix use-after-free bug in cifs_debug_data_proc_show()
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid …
-
Critical 9.8
nvme-rdma: destroy cm id before destroy qp to avoid use after free
In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: destroy cm id before destroy qp to avoid use after free We should always destroy cm_id before destroy qp to avoid to get cma event after qp was destroyed, which may lead to use aft…
-
Medium 6.2
blktrace: Fix uaf in blk_trace access after removing by sysfs
In the Linux kernel, the following vulnerability has been resolved: blktrace: Fix uaf in blk_trace access after removing by sysfs There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace…
-
High 7.7
mISDN: fix possible use-after-free in HFC_cleanup()
In the Linux kernel, the following vulnerability has been resolved: mISDN: fix possible use-after-free in HFC_cleanup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the tim…
-
High 8.8
watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()
In the Linux kernel, the following vulnerability has been resolved: watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This mean…
-
High 8.8
watchdog: Fix possible use-after-free in wdt_startup()
In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free in wdt_startup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the …
-
High 7.8
NFS: Fix use-after-free in nfs4_init_client()
In the Linux kernel, the following vulnerability has been resolved: NFS: Fix use-after-free in nfs4_init_client() KASAN reports a use-after-free when attempting to mount two different exports through two different NICs that belong to the same server. Olga was…
-
Critical 9.8
can: j1939: fix Use-after-Free, hold skb ref while in use
In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix Use-after-Free, hold skb ref while in use This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without inc…
-
High 8.8
kprobes: Fix possible use-after-free issue on kprobe registration
In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix possible use-after-free issue on kprobe registration When unloading a module, its state is changing MODULE_STATE_LIVE -> MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change …
-
Critical 9.8
smb: client: fix UAF in smb2_reconnect_server()
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in smb2_reconnect_server() The UAF bug is due to smb2_reconnect_server() accessing a session that is already being teared down by another thread that is executing __cifs_…
-
Critical 9.8
smb: client: guarantee refcounted children from parent session
In the Linux kernel, the following vulnerability has been resolved: smb: client: guarantee refcounted children from parent session Avoid potential use-after-free bugs when walking DFS referrals, mounting and performing DFS failover by ensuring that all childr…
-
High 7.8
mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash
In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash The rehash delayed work migrates filters from one region to another according to the number of available credits. The migra…
-
High 8.8
iommu/vt-d: Use device rbtree in iopf reporting path
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Use device rbtree in iopf reporting path The existing I/O page fault handler currently locates the PCI device by calling pci_get_domain_bus_and_slot(). This function searches the …
-
High 7.8
x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a p…
-
High 7.9
Use after free in Intel(R) Power Gadget software for Windows all versions may allow an authenticated user to potentiall…
-
High 7.8
Adobe Aero Beta has an arbitrary code execution vulnerability when parsing svg files
Adobe Aero Desktop versions 23.4 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a mal…
-
High 7.8
Adobe Illustrator TIF File Parsing Use-After-Free Remote memory corruption
Illustrator versions 28.4, 27.9.3 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a ma…
-
Critical 9.6
Use after free in V8 in Google Chrome prior to 125.0.6422.60 allowed a remote attacker to potentially exploit heap corr…