93 results · Feed
-
Low 2.0
tarfile: Skip DIRTYPE normalization during GNU LONGNAME/LONGLINK handling
The "tarfile" module would still apply normalization of AREGTYPE (\x00) blocks to DIRTYPE, even while processing a multi-block member such as GNUTYPE_LONGNAME or GNUTYPE_LONGLINK. This could result in a crafted tar archive being misinterpreted by the tarfile …
-
Medium 5.7
SourcelessFileLoader does not use io.open_code()
The import hook in CPython that handles legacy *.pyc files (SourcelessFileLoader) is incorrectly handled in FileLoader (a base class) and so does not use io.open_code() to read the .pyc files. sys.audit handlers for this audit event therefore do not fire.
-
Low 2.0
Limited path traversal when installing wheel archives
When pip is installing and extracting a maliciously crafted wheel archive, files may be extracted outside the installation directory. The path traversal is limited to prefixes of the installation directory, thus isn't able to inject or overwrite executable fi…
-
Medium 6.0
email BytesGenerator header injection due to unquoted newlines
The email module, specifically the "BytesGenerator" class, didn’t properly quote newlines for email headers when serializing an email message allowing for header injection when an email is serialized. This is only applicable if using "LiteralHeader" writing h…
-
Medium 6.3
base64.b64decode() always accepts "+/" characters, despite setting altchars
When passing data to the b64decode(), standard_b64decode(), and urlsafe_b64decode() functions in the "base64" module the characters "+/" will always be accepted, regardless of the value of "altchars" parameter, typically used to establish an "alternative base…
-
Medium 6.0
Header injection in http.cookies.Morsel
When using http.cookies.Morsel, user-controlled cookie values and parameters can allow injecting HTTP headers into messages. Patch rejects all control characters within cookie names, values, and parameters.
-
Medium 5.9
POP3 command injection in user-controlled commands
The poplib module, when passed a user-controlled command, can have additional commands injected using newlines. Mitigation rejects commands containing control characters.
-
Medium 5.9
IMAP command injection in user-controlled commands
The imaplib module, when passed a user-controlled command, can have additional commands injected using newlines. Mitigation rejects commands containing control characters.
-
Medium 5.9
wsgiref.headers.Headers allows header newline injection
User-controlled header names and values containing newlines can allow injecting HTTP headers.
-
Medium 5.7
Folding email comments of unfoldable characters doesn't preserve parenthesis
When folding a long comment in an email header containing exclusively unfoldable characters, the parenthesis would not be preserved. This could be used for injecting headers into email messages where addresses are user-controlled and not sanitized.
-
Medium 6.3
Quadratic complexity in node ID cache clearing
When building nested elements using xml.dom.minidom methods such as appendChild() that have a dependency on _clear_id_cache() the algorithm is quadratic. Availability can be impacted when building excessively nested documents.
-
Low 2.1
Out-of-memory when loading Plist
When loading a plist file, the plistlib module reads data in size specified by the file itself, meaning a malicious file can cause OOM and DoS issues
-
Medium 6.3
Excessive read buffering DoS in http.client
When reading an HTTP response from a server, if no read amount is specified, the default behavior will be to use Content-Length. This allows a malicious server to cause the client to read large amounts of data into memory, potentially causing OOM or other DoS.
-
Low 1.8
Quadratic complexity in os.path.expandvars() with user-controlled template
If the value passed to os.path.expandvars() is user-controlled a performance degradation is possible when expanding environment variables.
-
Medium 4.3
ZIP64 End of Central Directory (EOCD) Locator record offset not checked
The 'zipfile' module would not check the validity of the ZIP64 End of Central Directory (EOCD) Locator record offset value would not be used to locate the ZIP64 EOCD record, instead the ZIP64 EOCD record would be assumed to be the previous record in the ZIP a…
-
High 7.5
Tarfile infinite loop during parsing with negative member offset
There is a defect in the CPython “tarfile” module affecting the “TarFile” extraction and entry enumeration APIs. The tar implementation would process tar archives with negative offsets without error, resulting in an infinite loop and deadlock during the parsi…
-
Medium 4.3
HTMLParser quadratic complexity when processing malformed inputs
The html.parser.HTMLParser class had worse-case quadratic complexity when processing certain crafted malformed inputs potentially leading to amplified denial-of-service.
-
Medium 5.3
Bypass extraction filter to modify file metadata outside extraction directory
Allows modifying some file metadata (e.g. last modified) with filter="data" or file permissions (chmod) with filter="tar" of files outside the extraction directory. You are affected by this vulnerability if using the tarfile module to extract untrusted tar ar…
-
High 7.5
Tarfile extracts filtered members when errorlevel=0
When using a TarFile.errorlevel = 0 and extracting with a filter the documented behavior is that any filtered members would be skipped and not extracted. However the actual behavior of TarFile.errorlevel = 0 in affected versions is that the member would still…
-
High 7.5CVE-2025-4138 Public exploit
Bypassing extraction filter to create symlinks to arbitrary targets outside extraction directory
Allows the extraction filter to be ignored, allowing symlink targets to point outside the destination directory, and the modification of some file metadata. You are affected by this vulnerability if using the tarfile module to extract untrusted tar archives u…
-
High 7.5
Extraction filter bypass for linking outside extraction directory
Allows the extraction filter to be ignored, allowing symlink targets to point outside the destination directory, and the modification of some file metadata. You are affected by this vulnerability if using the tarfile module to extract untrusted tar archives u…
-
Critical 9.4CVE-2025-4517 Public exploit
Arbitrary writes via tarfile realpath overflow
Allows arbitrary filesystem writes outside the extraction directory during extraction with filter="data". You are affected by this vulnerability if using the tarfile module to extract untrusted tar archives using TarFile.extractall() or TarFile.extract() usin…
-
Medium 5.9
Use-after-free in "unicode_escape" decoder with error handler
There is an issue in CPython when using `bytes.decode("unicode_escape", error="ignore|replace")`. If you are not using the "unicode_escape" encoding or an error handler your usage is not affected. To work-around this issue you may stop using the error= handle…
-
Low 2.3
Mishandling of comma during folding and unicode-encoding of email headers
During an address list folding when a separating comma ends up on a folded line and that line is to be unicode-encoded then the separator itself is also unicode-encoded. Expected behavior is that the separating comma remains a plan comma. This can result in t…
-
Medium 6.3
URL parser allowed square brackets in domain names
The Python standard library functions `urllib.parse.urlsplit` and `urlparse` accepted domain names that included square brackets which isn't valid according to RFC 3986. Square brackets are only meant to be used as delimiters for specifying IPv6 and IPvFuture…
-
High 8.7
Unbounded memory buffering in SelectorSocketTransport.writelines()
Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines() method would not "pause" writing and signal to the Protocol to drain the buffer to the wire once the write buffer reached the "high-water mark". Because of this, Protocols would not …
-
Medium 6.3
Improper validation of IPv6 and IPvFuture addresses
The urllib.parse.urlsplit() and urlparse() functions improperly validated bracketed hosts (`[]`), allowing hosts that weren't IPv6 or IPvFuture. This behavior was not conformant to RFC 3986 and potentially enabled SSRF if a URL is processed by more than one U…
-
Medium 5.3
Virtual environment (venv) activation scripts don't quote paths
A vulnerability has been found in the CPython `venv` module and CLI where path names provided when creating a virtual environment were not quoted properly, allowing the creator to inject commands into virtual environment "activation" scripts (ie "source venv/…
-
High 7.5CVE-2024-6232 Public exploit
Regular-expression DoS when parsing TarFile headers
There is a MEDIUM severity vulnerability affecting CPython. Regular expressions that allowed excessive backtracking during tarfile.TarFile header parsing are vulnerable to ReDoS via specifically-crafted tar archives.
-
High 8.7
Infinite loop when iterating over zip archive entry names from zipfile.Path
There is a HIGH severity vulnerability affecting the CPython "zipfile" module affecting "zipfile.Path". Note that the more common API "zipfile.ZipFile" class is unaffected. When iterating over names of entries in a zip archive (for example, methods of "zipfil…
-
High 7.5
Quadratic complexity parsing cookies with backslashes
There is a LOW severity vulnerability affecting CPython, specifically the 'http.cookies' standard library module. When parsing cookies that contained backslashes for quoted characters in the cookie value, the parser would use an algorithm with quadratic compl…
-
Medium 5.5
Email header injection due to unquoted newlines
There is a MEDIUM severity vulnerability affecting CPython. The email module didn’t properly quote newlines for email headers when serializing an email message allowing for header injection when an email is serialized.
-
High 8.8
Remote Code Execution in pypa/setuptools
A vulnerability in the package_index module of pypa/setuptools versions up to 69.1.1 allows for remote code execution via its download functions. These functions, which are used to download packages from URLs provided by users or retrieved from package index …
-
Medium 6.2CVE-2024-3651 Public exploit
Denial of Service via Quadratic Complexity in kjd/idna
A vulnerability was identified in the kjd/idna library, specifically within the `idna.encode()` function, affecting version 3.6. The issue arises from the function's handling of crafted input strings, which can lead to quadratic complexity and consequently, a…
-
Medium 4.4
Proxy-Authorization request header isn't stripped during cross-origin redirects in urllib3
urllib3 is a user-friendly HTTP client library for Python. When using urllib3's proxy support with `ProxyManager`, the `Proxy-Authorization` header is only sent to the configured proxy, as expected. However, when sending HTTP requests *without* using urllib3'…
-
High 7.4
Memory race condition in ssl.SSLContext certificate store methods
A defect was discovered in the Python “ssl” module where there is a memory race condition with the ssl.SSLContext methods “cert_store_stats()” and “get_ca_certs()”. The race condition can be triggered if the methods are called at the same time as certificates…
-
High 7.5
Incorrect IPv4 and IPv6 private ranges
The “ipaddress” module contained incorrect information about whether certain IPv4 and IPv6 addresses were designated as “globally reachable” or “private”. This affected the is_private and is_global properties of the ipaddress.IPv4Address, ipaddress.IPv4Networ…
-
High 7.8
An issue was found in the CPython `tempfile.TemporaryDirectory` class affecting versions 3.12.1, 3.11.7, 3.10.13, 3.9.1…
-
Medium 6.2
Quoted zip-bomb protection for zipfile
An issue was found in the CPython `zipfile` module affecting versions 3.12.1, 3.11.7, 3.10.13, 3.9.18, and 3.8.18 and prior. The zipfile module is vulnerable to “quoted-overlap” zip-bombs which exploit the zip format to create a zip-bomb with a high compressi…
-
Medium 6.1
Groups not dropped before running subprocess when using empty 'extra_groups' parameter
An issue was found in CPython 3.12.0 `subprocess` module on POSIX platforms. The issue was fixed in CPython 3.12.1 and does not affect other stable releases. When using the `extra_groups=` parameter with an empty list as a value (ie `extra_groups=[]`) the log…