Ecosystem
Ubuntu
61,691 known vulnerabilities.
Most affected packages
12,665 results · Clear filters · Feed
-
Medium 6.3
NameConstraints not enforced across unconstrained intermediate CA
wolfSSL versions 5.9.2 and earlier contain a flaw in the X.509 certificate validation logic where it fails to properly enforce NameConstraints extensions when there is an unconstrained CA tier between a name-constrained intermediate CA and the leaf certificat…
-
Medium 6.3
Subject CN name-constraint check bypassed when non-DNS SAN present
A certificate with no dNSName SAN but another SAN type present (e.g. registeredID or iPAddress) bypassed the Subject CN dNSName name-constraint check. The CN-as-DNS fallback was gated on cert->subjectCN != NULL && cert->altNames == NULL && !cert->isCA instead…
-
Medium 6.3
Failed X509_verify_cert leaves unverified CA in shared CertManager
A failed X509_verify_cert call permanently plants an unverified attacker CA in the shared CertManager, bypassing certificate validation in every type-blind sibling consumer (native TLS, OCSP, CRL, direct CM verify). This affects version 5.8.4 through 5.9.2 of…
-
Medium 6.3
(D)TLS 1.2 client accepts early ChangeCipherSpec before ClientKeyExchange
A (D)TLS 1.2 client can accept a ChangeCipherSpec message before it has sent its ClientKeyExchange. No master secret has been derived at that point, so the client installs read keys derived from a known (deterministic) key and checks the server's Finished aga…
-
Medium 5.9
Nodemailer 5.0.0 through 10.0.1 TLS servername Cache Confusion
Nodemailer versions 5.0.0 through 10.0.1 use a process-global DNS cache that is keyed only by the DNS host, while each cache entry also stores the caller-specific TLS servername. When two direct TLS/SMTPS transports (secure: true) resolve the same non-IP host…
-
Medium 5.9
Nodemailer before 10.0.2 Stack Exhaustion via Nested Recipient Arrays
Nodemailer before 10.0.2 fails to properly flatten deeply nested arrays in recipient fields such as to, cc, and bcc, allowing attackers to cause stack exhaustion. Attackers can supply a deeply nested JSON recipient array that triggers recursive Array.toString…
-
Medium 5.8
Adminer before 6.0.2 Privileged-Port SSRF via host_port Regex
Adminer 5.5.1 through 6.0.1 improperly parses the login 'server' string in the host_port() function in adminer/include/functions.inc.php. The port capture group requires pure digits anchored to the end of the string, so any server value with a non-digit tail …
-
Medium 5.3
Nodemailer before 10.0.9 Malformed Envelope Recipient via RFC 5322 Comment
Nodemailer is a Node.js email-sending library. In versions >= 9.1.0 and < 10.0.9, the address parser (src/addressparser) mishandles addresses whose local-part is a quoted string and that are followed by RFC 5322 comments, allowing trailing comment-separated d…
-
Medium 5.8
Adminer before 6.0.2 Unauthenticated SSRF via Elasticsearch Driver
Adminer 4.16.0 through 6.0.1 contain a pre-authentication Server-Side Request Forgery (SSRF) vulnerability in the optional Elasticsearch driver (plugins/drivers/elastic.php), fixed in 6.0.2. Because adminer/include/auth.inc.php invokes Driver::connect() befor…
-
Medium 6.1
Adminer before 6.0.2 XSS via CONNECTION_ID escalating to RCE
Adminer before 6.0.2 contains a cross-site scripting vulnerability where the CONNECTION_ID() database result is interpolated into JavaScript without proper escaping, allowing a malicious database server to execute arbitrary JavaScript in the authenticated Adm…
-
Medium 6.1
Hugo before 0.166.0 Cross-Site Scripting via text/org
Hugo is a static site generator. In versions from v0.56.0 through v0.165.x, content files mapped to the text/org media type are rendered without escaping raw HTML: Org export blocks and @@html:...@@ snippets pass HTML through unescaped, resulting in cross-sit…
-
Medium 5.4
Hugo before 0.166.0 Stored XSS via lineAnchors code block option
Hugo versions 0.75.0 through 0.165.x contain a stored cross-site scripting vulnerability: the syntax highlighter does not escape the `lineAnchors` option before passing it to Chroma, which writes the value verbatim into the `id` and `href` attributes of the g…
-
Medium 5.9
GitPython before 3.1.62 Path Traversal via gitmodules path
GitPython before 3.1.62 does not validate the `path` field read from an untrusted .gitmodules file when updating submodules. While a prior fix (GHSA-hmq2-w58f-27jc) added Submodule._validated_name() to constrain the `name` field, and GitPython's own containme…
-
Medium 6.5
Netty 4.2.0 through 4.2.17 HTTP/3 Request Routing Bypass
Netty's HTTP/3 codec (io.netty:netty-codec-http3) in versions 4.2.0.Final through 4.2.17.Final does not enforce the RFC 9114 requirement that the :authority pseudo-header field and a literal host header field, when both present, carry the same value. A remote…
-
Medium 5.9
OOB read / info leak in convert.* stream filters when line-break-chars contains NUL
The convert.base64-encode, convert.quoted-printable-encode and convert.quoted-printable-decode stream filters accept a line-break-chars option whose length is tracked separately from the string itself. The filter constructors duplicate the value with pestrdup…
-
Medium 6.5
IPv6 ACL bypass in FastCGI listen.allowed_clients due to partial address comparison (memcmp 12 bytes)
The IPv6 branch of the FastCGI client access check compares only the first 12 bytes of a 16-byte IPv6 address, so listen.allowed_clients matches on a /96 prefix instead of the exact address. An attacker who can source an address sharing the first 96 bits with…
-
Medium 4.3
TLS Hostname Verification Falls Back to CN After SAN Mismatch
PHP's OpenSSL stream peer verification checks the certificate's subjectAltName entries first and, whenever no entry matches, falls back to the Common Name. RFC 6125 requires the CN to be ignored once the certificate presents any service identity, so a certifi…
-
Medium 6.5
Heap-buffer-overflow in php_openssl_matches_wildcard_name on crafted server cert wildcard CN
php_openssl_matches_wildcard_name() in ext/openssl/xp_ssl.c underflows the length argument passed to memchr() when a TLS server certificate presents a wildcard name whose literal characters are together longer than the hostname being verified. A malicious ser…
-
Medium 5.9
Cross-origin credential leak in HTTP stream wrapper redirects
When the http:// stream wrapper follows a redirect it forwards the user-supplied Authorization, Cookie and Proxy-Authorization headers unchanged, even when the redirect target is a different host, a different port, or a downgrade from HTTPS to HTTP. A server …
-
Medium 6.5
Integer overflow to buffer overflow in soap HTTP parsing
The SOAP HTTP client guards its response buffer growth with a check that relies on signed integer overflow, which is undefined behaviour and is not guaranteed to trigger. When the check is optimised away, a malicious SOAP server can make the client allocate a…
-
Medium 6.9
PHP on Windows: Reserved Device Names Are Not Rejected Before File/Stream I/O which can cause DoS
On Windows, PHP's filesystem and stream APIs do not reject reserved device names such as CON, PRN, AUX, NUL, COM1 to COM9, LPT1 to LPT9, CONIN$ and CONOUT$ when they appear as a component of a path. An attacker-controlled filename therefore reaches CreateFile…
-
Medium 4.3
Phar TAR phar_tar_number() Integer Overflow - Archive Entry Injection
phar_tar_number() parses the octal size field of a TAR header into a uint32_t with no overflow check. The field is 11 octal digits wide and holds values up to 0x1FFFFFFFF, so a size above 0xFFFFFFFF silently wraps. The parser then skips the wrong number of da…
-
Medium 5.8
Out-of-bounds read in the HTTP stream wrapper when following a redirect with an empty Location header
When the HTTP stream wrapper follows a redirect and the response carries a Location header with an empty value, the redirect code reads one byte past the end of the heap buffer holding the location. The value of that out-of-bounds byte decides which redirect …
-
Medium 5.3
GLPI: Unallowed modfication of knowbase items comments and translations
GLPI is a free asset and IT management software package. From 0.85 until 10.0.26 and 11.0.8, a low-privileged authenticated user can create, update, or delete knowledge base comments and translations without the required authorization for the affected content…
-
Medium 5.9
GLPI: Unallowed authentication method update by administrator
GLPI is a free asset and IT management software package. From 0.84 until 10.0.26 and 11.0.8, an administrator holding the Update auth and sync or Update auth, sync and 2FA right can change the authentication method and disable two-factor authentication for us…
-
Medium 5.3
GLPI: Unauthorized Debug Mode Activation via Profile Update (Privilege Escalation)
GLPI is a free asset and IT management software package. From 0.72 until 10.0.26 and 11.0.8, an authenticated user without the required permission can enable debug mode. The affected user-setting update does not enforce the privilege boundary intended to rest…
-
Medium 6.0
GLPI: Unexpected access to update operations through the API
GLPI is a free asset and IT management software package. From 11.0.0 until 11.0.8, a low-privileged authenticated user can use the new API (v2) to perform update operations that the same user is normally forbidden to perform through the user interface. The AP…
-
Medium 4.6
GLPI: LDAP filter injection in user import feature
GLPI is a free asset and IT management software package. From 0.70 until 10.0.26 and 11.0.8, an authenticated hotliner or technician can submit crafted criteria through the user import feature to bypass the configured default LDAP filter. This allows access t…
-
Medium 4.5
RabbitMQ: Stored HTML Injection in RabbitMQ Management OAuth Error Handling
RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ Management rendered an AMQP authorization-error reason containing an attacker-controlled queue name as HTML when the OAuth management UI was e…
-
Medium 4.6
RabbitMQ: Federation and Shovel Gen-Servers Lack format_status Callback — Plaintext Credentials Exposed in Crash Dumps and sys:get_status
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, Shovel does not format state logged by the crash reporter and can leave unencrypted credentials in a crash dump file. the shovel worker genserver processes does n…
-
Medium 5.6
Missing ownership check on the shared memory object named by the kitty askpass escape code
Missing Authorization in the askpass escape code handler in kitty from 0.25.0 before 0.49.0 allows a local user other than the one running the terminal to obtain the text typed into a prompt that kitty itself displays, because handle_remote_askpass() in kitty…
-
Medium 5.9
RabbitMQ: Atom exhaustion: to_atom on global-parameter :name
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.22 and 4.1.14 and 4.2.7 and 4.3.1, Atom exhaustion: toatom on global-parameter :name. resourceexists/2 (and the PUT/DELETE handlers) call rabbitdatacoercion:toatom/1 on the :name URL path segm…
-
Medium 5.1
RabbitMQ: Incomplete fix for CVE-2026-44838: `escape_regex_char/1` does not escape `-`, leaving room for an MQTT topic permission bypass
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3 and 4.2.9 and 4.1.14 and 4.0.23, Incomplete fix for CVE-2026-44838: escaperegexchar/1 does not escape -, leaving room for an MQTT topic permission bypass. the CVE-2026-44838 fix made expandt…
-
Medium 6.9
RabbitMQ: Admin-only atom exhaustion: PUT /api/users tags list
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.22 and 4.1.14 and 4.2.7, Admin-only atom exhaustion: PUT /api/users tags list. settags/2 maps rabbitdatacoercion:toatom/1 over the user's tags list. The 20 MB management body limit fits ~3-4M …
-
Medium 4.6
Use after free in the kitty drag and drop protocol when a drag source item is aborted mid-transfer
Use After Free in the drag source path of the drag and drop protocol in kitty from 0.47.0 before 0.49.0 allows a program writing to the terminal to cause the terminal to read from and write to freed heap memory, because drag_remote_file_data() in kitty/dnd.c …
-
Medium 6.0
RabbitMQ: Web MQTT with PROXY Protocol enabled: a loopback-only user permission bypass
RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.18, 4.0.23, 4.1.14, 4.2.9, and 4.3.3, native MQTT and MQTT over WebSocket behind a trusted PROXY Protocol frontend could lose the proxy-derived client address before the MQTT authentication …
-
Medium 6.0
RabbitMQ: Authenticated RabbitMQ JMS Topic Selector Users Can Consume Broker CPU with an Unbounded LIKE Regular Expression
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.23, 4.1.14, 4.2.9, and 4.3.3, the optional rabbitmq_jms_topic_exchange plugin's x-jms-topic exchange accepted a client-controlled rjms_erlang_selector binding expression whose LIKE evaluator e…
-
Medium 6.3
RabbitMQ: AMQP 1.0 management `GET /bindings` exposes full binding topology to any authenticated AMQP user without resource/management permission checks
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, AMQP 1.0 management GET /bindings exposes full binding topology to any authenticated AMQP user without resource/management permission checks. the AMQP 1.0 HTTP-ov…
-
Medium 6.0
Missing authorization in the kitty drag and drop protocol allows a client to obtain dragged file contents without a drop
Missing Authorization in the drop handling path of the drag and drop protocol in kitty from 0.47.0 before 0.49.0 allows a program writing to the terminal to obtain the contents of files dragged over the window even when the user never completes the drop, beca…
-
Medium 5.9
RabbitMQ: Shovel Management Atom Exhaustion Allows Persistent Broker-Wide Denial of Service
RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, the Shovel parameter parser converted attacker-controlled runtime parameter values into non-garbage-collected Erlang atoms before bounding them or checking a fixed allowlist. Expl…