42 results · Clear filters · Feed
-
High 8.7
compress zstd: Panic on two-block frames
compress provides various compression algorithms. Prior to 1.20.2, the zstd DecodeAll and streaming decoder paths can panic when a crafted two-block frame reaches huff0.ReadTable with an FSE normalized count of 32768 that readNCount stores in int16 as -32768.…
-
High 7.5
HTTP/2 server crash due to HPACK encoder race in net/http
HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part …
-
High 7.5
HTTP/2 transport accepts malformed framing-related headers in net/http
Historically, we have been rather lax about malformed framing-related headers in our HTTP/2 implementation, as they cannot interfere with HTTP/2 framing. However, this makes it possible for our HTTP/2 implementation to forward responses containing such header…
-
High 7.5
Excessive CPU consumption from repeated initial window changes in net/http
A malicious HTTP/2 peer can cause excessive CPU consumption in the client or server by opening a large number of streams and then sending many small SETTINGS frames containing SETTINGS_INITIAL_WINDOW_SIZE values.
-
High 7.5
HTTP/2 server memory exhaustion due to Trailer headers in net/http
When "Trailer" headers are sent by a client, the HTTP server internally uses the header values to populate the Request.Trailer map passed to the server handler. Because Request.Trailer is a map, each entry incurs memory overhead. For HTTP/2 servers, a malicio…
-
High 8.7
gRPC-Go: Denial of Service (DoS) via crash due to missing `:authority` and `Host` headers in the xDS servers
gRPC-Go is the Go language implementation of gRPC. Prior to 1.82.2 and 1.83.2, servers created with xds.NewGRPCServer() allow internal/transport/http2_server.go to accept an RPC containing neither the :authority header nor the Host header, while RouteAndProce…
-
High 8.7
gRPC-Go: Heap Memory Exhaustion (OOM) via HTTP/2 DATA Frame Fragmentation
gRPC-Go is the Go language implementation of gRPC. Prior to 1.83.1, internal/transport/transport.go stores each fragmented HTTP/2 DATA frame as a separate recvMsg in recvBuffer, so millions of one-byte frames can consume disproportionate heap memory even when…
-
High 7.5
Apply ReadHeaderTimeout when doing unencrypted HTTP/2 check in net/http
When a server is configured to support unencrypted HTTP/2, it reads a few bytes from each new connection to see if they contain the HTTP/2 client preface. ReadHeaderTimeout is unexpectedly not being applied when doing this.
-
High 7.5
Limit handshake messages we are willing to accept post-handshake in crypto/tls
Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key deriva…
-
High 7.5
Add recursion depth guard during decode in encoding/xml
Previously, DecodeElement would reset the depth counter causing it to never fire; this could lead to stack exhaustion.
-
High 7.5
Enforce maximum recursion depth in encoding/asn1
Enforce a recursion limit in Unmarshal to prevent stack exhaustion when parsing deeply-nested, recursive structures.
-
High 7.5
oras-go: credential forwarding via unvalidated Location header in blob upload
oras-go is a Go library for managing OCI artifacts. Prior to 2.6.1, registry/remote/repository.go in blobStore.completePushAfterInitialPost follows a registry-controlled Location header during monolithic blob upload and reuses the Authorization header from th…
-
High 8.2
containerd: Arbitrary host CRI log file read via symlink following in CRI checkpoint restore
containerd is an open-source container runtime. Versions prior to 2.3.2, 2.2.5 and 2.1.9 contain a bug where the CRI plugin restores container.log from a checkpoint image without validating a symlinked path. This could result in reading an arbitrary file on t…
-
High 8.4
containerd CRI checkpoint restore CDI annotation smuggling
containerd is an open-source container runtime. In Versions prior to 2.3.2, 2.2.5 and 2.1.9, the CRI implementation improperly trusts Container Device Interface (CDI) annotations found within untrusted checkpoint image metadata during container restoration. W…
-
High 7.3CVE-2026-46680 Public exploit
containerd user ID handling bypass allows runAsNonRoot evasion
containerd is an open-source container runtime. In versions prior to 1.7.32, 2.0.9, 2.2.4 and 2.3.1, containers launched with a numeric User directive that cannot be parsed as a 32-bit integer are incorrectly treated as a username, leading to runAsNonRoot eva…
-
High 7.5
Invoking pathological RSA/DSA parameters may cause DoS in golang.org/x/crypto/ssh
The RSA and DSA public key parsers did not enforce size limits on key parameters. A crafted public key with an excessively large modulus or DSA parameter could cause several minutes of CPU consumption during signature verification. This could be triggered by …
-
High 7.5
Invoking byte arithmetic causes underflow and panic in golang.org/x/crypto/ssh
An incorrectly placed cast from bytes to int allowed for server-side panic in the AES-GCM packet decoder for well-crafted inputs.
-
High 8.7
SpdyStream: DOS on CRI
spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTING…
-
High 7.3CVE-2026-39883 Public exploit
OpenTelemetry-Go has an incomplete fix for CVE-2026-24051: BSD kenv command not using absolute path enables PATH hijacking
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.15.0 to 1.42.0, the fix for CVE-2026-24051 changed the Darwin ioreg command to use an absolute path but left the BSD kenv command using a bare name, allowing the same PATH hijacking attack on …
-
High 7.5
Inefficient policy validation in crypto/x509
Validating certificate chains which use policies is unexpectedly inefficient when certificates in the chain contain a very large number of policy mappings, possibly causing denial of service. This only affects validation of otherwise trusted certificate chain…
-
High 7.5
Unexpected work during chain building in crypto/x509
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 an…
-
High 7.5
Unauthenticated TLS 1.3 KeyUpdate record can cause persistent connection retention and DoS in crypto/tls
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.
-
High 8.8
Code execution vulnerability in SWIG code generation in cmd/go
SWIG file names containing 'cgo' and well-crafted payloads could lead to code smuggling and arbitrary code execution at build time due to trust layer bypass.
-
High 7.5
OpenTelemetry-Go multi-value `baggage` header extraction causes excessive allocations (remote dos amplification)
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.36.0 to 1.40.0, multi-value baggage: header extraction parses each header field-value independently and aggregates members across values. This allows an attacker to amplify cpu and allocations…
-
High 7.5
Denial of service in github.com/buger/jsonparser
The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack.
-
High 7.0
Docker Desktop Docker Plugins Uncontrolled Search Path Element Local Privilege Escalation Vulnerability
Docker CLI for Windows searches for plugin binaries in C:\ProgramData\Docker\cli-plugins, a directory that does not exist by default. A low-privileged attacker can create this directory and place malicious CLI plugin binaries (docker-compose.exe, docker-build…
-
High 7.5
Memory exhaustion in query parameter parsing in net/url
The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encode…
-
High 7.8
Arbitrary file write using cgo pkg-config directive in cmd/go
Building a malicious file with cmd/go can cause can cause a write to an attacker-controlled file with partial control of the file content. The "#cgo pkg-config:" directive in a Go source file provides command-line arguments to provide to the Go pkg-config com…
-
High 7.0
Unexpected code execution when invoking toolchain in cmd/go
Downloading and building modules with malicious version strings can cause local code execution. On systems with Mercurial (hg) installed, downloading modules from non-standard sources (e.g., custom domains) can cause unexpected code execution due to how exter…
-
High 7.3
containerd affected by a local privilege escalation via wide permissions on CRI directory
containerd is an open-source container runtime. Versions 0.1.0 through 1.7.28, 2.0.0-beta.0 through 2.0.6, 2.1.0-beta.0 through 2.1.4 and 2.2.0-beta.0 through 2.2.0-rc.1 have an overly broad default permission vulnerability. Directory paths `/var/lib/containe…
-
High 7.0
Incorrect results returned from Rows.Scan in database/sql
Cancelling a query (e.g. by cancelling the context passed to one of the query methods) during a call to the Scan method of the returned Rows can result in unexpected results if other queries are being made in parallel. This can result in a race condition that…
-
High 8.5CVE-2025-53547 Public exploit
Helm Chart Dependency Updating With Malicious Chart.yaml Content And Symlink Can Lead To Code Execution
Helm is a package manager for Charts for Kubernetes. Prior to 3.18.4, a specially crafted Chart.yaml file along with a specially linked Chart.lock file can lead to local code execution when dependencies are updated. Fields in a Chart.yaml file, that are carri…
-
High 7.5
jwt-go allows excessive memory allocation during header parsing
golang-jwt is a Go implementation of JSON Web Tokens. Starting in version 3.2.0 and prior to versions 5.2.2 and 4.5.2, the function parse.ParseUnverified splits (via a call to strings.Split) its argument (which is untrusted data) on periods. As a result, in t…
-
High 7.5
Unexpected memory consumption during token parsing in golang.org/x/oauth2
An attacker can pass a malicious malformed token which causes unexpected memory to be consumed during parsing.
-
High 7.5
Potential denial of service in golang.org/x/crypto
SSH servers which implement file transfer protocols are vulnerable to a denial of service attack from clients which complete the key exchange slowly, or not at all, causing pending content to be read into memory, but never transmitted.
-
High 7.5
Stack exhaustion in Parse in go/build/constraint
Calling Parse on a "// +build" build tag line with deeply nested expressions can cause a panic due to stack exhaustion.
-
High 7.5
Stack exhaustion in Decoder.Decode in encoding/gob
Calling Decoder.Decode on a message which contains deeply nested structures can cause a panic due to stack exhaustion. This is a follow-up to CVE-2022-30635.
-
High 7.5
Denial of service due to improper 100-continue handling in net/http
The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next r…
-
High 7.5
HTTP/2 CONTINUATION flood in net/http
An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames. Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a reques…
-
High 7.5
Infinite loop in JSON unmarshaling in google.golang.org/protobuf
The protojson.Unmarshal function can enter an infinite loop when unmarshaling certain forms of invalid JSON. This condition can occur when unmarshaling into a message which contains a google.protobuf.Any value, or when the UnmarshalOptions.DiscardUnknown opti…