29 results · Clear filters · Feed
-
High 7.5
HTTP/2 server crash due to HPACK encoder race in net/http
HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part …
-
High 7.5
HTTP/2 transport accepts malformed framing-related headers in net/http
Historically, we have been rather lax about malformed framing-related headers in our HTTP/2 implementation, as they cannot interfere with HTTP/2 framing. However, this makes it possible for our HTTP/2 implementation to forward responses containing such header…
-
High 7.5
Excessive CPU consumption from repeated initial window changes in net/http
A malicious HTTP/2 peer can cause excessive CPU consumption in the client or server by opening a large number of streams and then sending many small SETTINGS frames containing SETTINGS_INITIAL_WINDOW_SIZE values.
-
High 7.5
HTTP/2 server memory exhaustion due to Trailer headers in net/http
When "Trailer" headers are sent by a client, the HTTP server internally uses the header values to populate the Request.Trailer map passed to the server handler. Because Request.Trailer is a map, each entry incurs memory overhead. For HTTP/2 servers, a malicio…
-
High 8.7
gRPC-Go: Denial of Service (DoS) via crash due to missing `:authority` and `Host` headers in the xDS servers
gRPC-Go is the Go language implementation of gRPC. Prior to 1.82.2 and 1.83.2, servers created with xds.NewGRPCServer() allow internal/transport/http2_server.go to accept an RPC containing neither the :authority header nor the Host header, while RouteAndProce…
-
High 8.7
gRPC-Go: Heap Memory Exhaustion (OOM) via HTTP/2 DATA Frame Fragmentation
gRPC-Go is the Go language implementation of gRPC. Prior to 1.83.1, internal/transport/transport.go stores each fragmented HTTP/2 DATA frame as a separate recvMsg in recvBuffer, so millions of one-byte frames can consume disproportionate heap memory even when…
-
High 7.5
Apply ReadHeaderTimeout when doing unencrypted HTTP/2 check in net/http
When a server is configured to support unencrypted HTTP/2, it reads a few bytes from each new connection to see if they contain the HTTP/2 client preface. ReadHeaderTimeout is unexpectedly not being applied when doing this.
-
High 7.5
Limit handshake messages we are willing to accept post-handshake in crypto/tls
Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key deriva…
-
High 7.5
Add recursion depth guard during decode in encoding/xml
Previously, DecodeElement would reset the depth counter causing it to never fire; this could lead to stack exhaustion.
-
High 7.5
Enforce maximum recursion depth in encoding/asn1
Enforce a recursion limit in Unmarshal to prevent stack exhaustion when parsing deeply-nested, recursive structures.
-
High 7.5
Quadratic complexity in WordDecoder.DecodeHeader in mime
Decoding a maliciously-crafted MIME header containing many invalid encoded-words can consume excessive CPU.
-
High 7.5
Infinite loop in HTTP/2 transport when given bad SETTINGS_MAX_FRAME_SIZE in net/http/internal/http2 in golang.org/x/net
When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.
-
High 7.3CVE-2026-39883 Public exploit
OpenTelemetry-Go has an incomplete fix for CVE-2026-24051: BSD kenv command not using absolute path enables PATH hijacking
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.15.0 to 1.42.0, the fix for CVE-2026-24051 changed the Darwin ioreg command to use an absolute path but left the BSD kenv command using a bare name, allowing the same PATH hijacking attack on …
-
High 7.5
Inefficient policy validation in crypto/x509
Validating certificate chains which use policies is unexpectedly inefficient when certificates in the chain contain a very large number of policy mappings, possibly causing denial of service. This only affects validation of otherwise trusted certificate chain…
-
High 7.5
Unexpected work during chain building in crypto/x509
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 an…
-
High 7.5
Unauthenticated TLS 1.3 KeyUpdate record can cause persistent connection retention and DoS in crypto/tls
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.
-
High 8.8
Code execution vulnerability in SWIG code generation in cmd/go
SWIG file names containing 'cgo' and well-crafted payloads could lead to code smuggling and arbitrary code execution at build time due to trust layer bypass.
-
High 7.5
OpenTelemetry-Go multi-value `baggage` header extraction causes excessive allocations (remote dos amplification)
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.36.0 to 1.40.0, multi-value baggage: header extraction parses each header field-value independently and aggregates members across values. This allows an attacker to amplify cpu and allocations…
-
High 7.5
Incorrect parsing of IPv6 host literals in net/url
url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.
-
High 8.6
Potential code smuggling via doc comments in cmd/cgo
A discrepancy between how Go and C/C++ comments were parsed allowed for code smuggling into the resulting cgo binary.
-
High 7.5
Memory exhaustion in query parameter parsing in net/url
The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encode…
-
High 7.8
Arbitrary file write using cgo pkg-config directive in cmd/go
Building a malicious file with cmd/go can cause can cause a write to an attacker-controlled file with partial control of the file content. The "#cgo pkg-config:" directive in a Go source file provides command-line arguments to provide to the Go pkg-config com…
-
High 7.0
Unexpected code execution when invoking toolchain in cmd/go
Downloading and building modules with malicious version strings can cause local code execution. On systems with Mercurial (hg) installed, downloading modules from non-standard sources (e.g., custom domains) can cause unexpected code execution due to how exter…
-
High 7.0
Incorrect results returned from Rows.Scan in database/sql
Cancelling a query (e.g. by cancelling the context passed to one of the query methods) during a call to the Scan method of the returned Rows can result in unexpected results if other queries are being made in parallel. This can result in a race condition that…
-
High 7.5
Usage of ExtKeyUsageAny disables policy validation in crypto/x509
Calling Verify with a VerifyOptions.KeyUsages that contains ExtKeyUsageAny unintentionally disabledpolicy validation. This only affected certificate chains which contain policy graphs, which are rather uncommon.
-
High 7.5
Unexpected memory consumption during token parsing in golang.org/x/oauth2
An attacker can pass a malicious malformed token which causes unexpected memory to be consumed during parsing.
-
High 7.5
Stack exhaustion in Parse in go/build/constraint
Calling Parse on a "// +build" build tag line with deeply nested expressions can cause a panic due to stack exhaustion.
-
High 7.5
Stack exhaustion in Decoder.Decode in encoding/gob
Calling Decoder.Decode on a message which contains deeply nested structures can cause a panic due to stack exhaustion. This is a follow-up to CVE-2022-30635.
-
High 7.5
Infinite loop in JSON unmarshaling in google.golang.org/protobuf
The protojson.Unmarshal function can enter an infinite loop when unmarshaling certain forms of invalid JSON. This condition can occur when unmarshaling into a message which contains a google.protobuf.Any value, or when the UnmarshalOptions.DiscardUnknown opti…