Vendor
zephyrproject
219 known vulnerabilities.
Products
219 results · Feed
-
High 7.8
Unvalidated user-supplied buffer pointers in the I3C do_ccc system call handler allow kernel memory read/write from user mode
The system-call verifier for i3c_do_ccc() in drivers/i3c/i3c_handlers.c validated the outer struct i3c_ccc_payload, the broadcast ccc.data buffer and the targets.payloads[] array, but did not validate the per-target data buffers those array elements point at.…
-
High 8.4
Out-of-bounds write in the NXP GAU ADC driver due to byte-versus-sample buffer size validation mismatch
The NXP GAU ADC driver (drivers/adc/adc_mcux_gau_adc.c) validated the caller-supplied sequence->buffer_size, which is expressed in bytes, against the number of active channels, which is a sample count. It then stored that byte count directly in data->results_…
-
Medium 4.4
SMBus callback-removal syscalls accept an unvalidated user pointer, letting user threads manipulate kernel callback state
The SMBus driver API exposed smbus_smbalert_remove_cb() and smbus_host_notify_remove_cb() as Zephyr syscalls. Their verifiers in drivers/smbus/smbus_handlers.c validated only the dev argument with K_SYSCALL_OBJ(dev, K_OBJ_DRIVER_SMBUS) and forwarded the calle…
-
Medium 6.8
Integer underflow of net_buf length in the MCUmgr serial (SMP over console) transport leads to out-of-bounds read
The MCUmgr SMP-over-console transport decodes a base64 frame, reads a 16-bit packet length from it, verifies a CRC and then unconditionally strips the trailing CRC with rx_ctxt->nb->len -= 2U; in mcumgr_serial_process_frag() (subsys/mgmt/mcumgr/transport/src/…
-
Medium 5.9
NULL pointer dereference in Zephyr LwM2M client when the CoAP Block1 context pool is exhausted
parse_write_op() in subsys/net/lib/lwm2m/lwm2m_message_handling.c handles inbound CoAP WRITE/CREATE requests that carry a Block1 option. For the first block of a transfer it called init_block_ctx() and then immediately stored the peer-selected block size with…
-
Medium 6.5
Wild pointer dereference in Zephyr BSD sockets when a TCP listening socket reports an asynchronous error
The native BSD-socket layer recorded a pending asynchronous socket error by type-punning it into struct net_context's void user_data field (ctx->user_data = INT_TO_POINTER(-status) in zsock_accepted_cb(), zsock_received_cb(), zsock_connected_cb() and zsock_cl…
-
Low 3.7
Out-of-bounds read in CoAP well-known-core Uri-Query href matching (match_path_uri)
The CoAP link-format helper match_path_uri() in subsys/net/lib/coap/coap_link_format.c compares a registered resource path against the URI carried in a Uri-Query href= option. That URI is not NUL terminated, but the inner character loop advanced its index k o…
-
Medium 6.3
Out-of-bounds write in the IEEE 802.15.4 L2 transmit path for oversized non-6LoWPAN frames
ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG…
-
High 7.8
Out-of-bounds write in the ADI MAX32 ADC driver due to incorrect adc_sequence buffer size validation
The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the l…
-
High 7.8
Out-of-bounds write in the NXP MCUX LPADC ADC driver due to missing adc_sequence buffer size validation
The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the l…
-
High 7.8
Missing write validation of user-supplied handle pointer in the RTIO syscall verifier allows arbitrary kernel write
The userspace verifier z_vrfy_rtio_sqe_copy_in_get_handles() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) validated the RTIO object handle and the sqes input array, but not the handle out-parameter. On the first loop iteration it…
-
Medium 5.3
Out-of-bounds read and permanent loss of Wi-Fi reception in the ESP-hosted SPI driver's frame reassembly
The Espressif ESP-hosted Wi-Fi driver (drivers/wifi/esp_hosted/) parses frames received over SPI from the ESP co-processor in esp_hosted_event_task(). For control frames it took the 16-bit TLV field data_length straight off the wire and passed it to pb_istrea…
-
Medium 5.3
AEAD nonce reuse in Zephyr secure_storage ITS default nonce provider due to missing thread synchronization
The default AEAD nonce provider for the PSA Internal Trusted Storage transform module, secure_storage_its_transform_aead_get_nonce() in subsys/secure_storage/src/its/transform/aead_get.c, stores its nonce counter in unsynchronized function-local static variab…
-
High 7.8
Missing user-pointer validation in tgpio_pin_read_ts_ec syscall handler allows arbitrary supervisor-memory write from userspace
The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output pointers to the driver wit…
-
Medium 6.0
Out-of-bounds write in the Intel SEDI IPM driver from an unvalidated inbound doorbell length
The Intel SEDI IPM (inter-processor mailbox) driver in drivers/ipm/ipm_sedi.c handles an inbound message interrupt in ipm_event_dispose(). It read the peer-written doorbell register, extracted the payload length with IPC_HEADER_GET_LENGTH(), and passed that l…
-
Medium 5.7
Double free of the USB host configuration descriptor when device enumeration fails
The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DE…
-
Medium 4.7
ICMPv6 error messages sent for multicast-destined packets and non-unique source addresses enable network amplification in Zephyr's IPv6 stack
net_icmpv6_send_error() in subsys/net/ip/icmpv6.c implemented only one of the three RFC 4443 section 2.4 suppression rules (do not answer an ICMPv6 error with an ICMPv6 error). It did not check whether the triggering packet's source address identifies a singl…
-
Medium 4.3
Out-of-bounds read in gPTP Announce path-trace validation via unvalidated stepsRemoved
gptp_mi_qualify_announce() in subsys/net/l2/ethernet/gptp/gptp_mi.c walks the Path Trace TLV of a received IEEE 802.1AS Announce message, comparing each clock identity against the local one. The loop bound was taken solely from the attacker-controlled wire fi…
-
Low 3.1
Out-of-bounds read in the Zephyr gPTP receive path when handling short Ethernet frames
gptp_handle_msg() in subsys/net/l2/ethernet/gptp/gptp.c dereferenced the gPTP header returned by GPTP_HDR() and switched on hdr->message_type without first checking that the received frame carries at least sizeof(struct gptp_hdr) (34) bytes of payload. The he…
-
Medium 6.8
Out-of-bounds write in it51xxx I2C target FIFO ISR on oversized write transaction
The ITE it51xxx I2C driver, when operating as an I2C target (slave) in buffer mode (CONFIG_I2C_TARGET + CONFIG_I2C_TARGET_BUFFER_MODE), copies host-supplied write data into the fixed-size data->target_in_buffer inside its target FIFO interrupt handler target_…
-
Medium 4.6
Kernel panic in the it82xx2 USB device controller driver via re-initialization of a busy delayable work item
The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is …
-
Medium 6.8
it82xx2 USB device controller submits incomplete OUT transfer buffers, causing use-after-free and event-list corruption
The ITE IT82xx2 USB device-controller driver (drivers/usb/udc/udc_it82xx2.c) mishandles multi-packet OUT transfers on non-control endpoints. In work_handler_out() the active transfer buffer is obtained with udc_buf_peek() (which does not dequeue it); when a f…
-
Medium 5.9
Use-after-free / double-free from unsynchronized concurrent access to the TLS client session cache in Zephyr sockets
Zephyr's TLS socket layer in subsys/net/lib/sockets/sockets_tls.c keeps a single process-global array, client_cache, of cached client sessions that is shared by every TLS socket context. The functions that mutate and read it — tls_session_save(), tls_session_…
-
Medium 6.5
Zephyr IPv6 Neighbor Discovery zero reachable time from crafted Router Advertisement causes assertion/DoS
net_if_ipv6_calc_reachable_time() in subsys/net/ip/net_if.c derives a randomized ND reachable time from ipv6->base_reachable_time as min_reachable + sys_rand32_get() % (max_reachable - min_reachable), where min_reachable = base/2 and max_reachable = 3*base/2 …
-
Medium 4.6
Infinite loop denial of service in Zephyr SDIO byte-I/O from a card-supplied zero max_blk_size
The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, func->cis.max_blk_size) as the per-iteration step. The value func->cis.max_blk_size is decoded directly…
-
Medium 5.3
Heap memory leak in mcumgr settings-management handlers on access-hook rejection leads to denial of service
The mcumgr SMP settings-management group handlers settings_mgmt_read(), settings_mgmt_write(), and settings_mgmt_delete() in subsys/mgmt/mcumgr/grp/settings_mgmt/src/settings_mgmt.c allocate a key_name buffer (and, for read, a data buffer) via k_malloc() when…
-
High 7.5
NULL pointer dereference in Zephyr MQTT-SN client when removing a non-responsive gateway
The MQTT-SN client keepalive handler process_ping() in subsys/net/lib/mqtt_sn/mqtt_sn.c removes the gateway record after PINGREQ retries are exhausted. It invoked SYS_SLIST_PEEK_HEAD_CONTAINER(&client->gateways, gw, next) but discarded the result. That macro …
-
Medium 5.3
Type confusion in Zephyr HL78xx GNSS NMEA driver causes wild-pointer write from GNSS input
The Sierra Wireless HL78xx modem GNSS driver (drivers/modem/hl78xx/, later drivers/modem/vendor_standalone/hl78xx/) embeds a generic struct gnss_nmea0183_match_data match_data inside struct hl78xx_gnss_data. The generic NMEA0183 match helper (drivers/gnss/gns…
-
Medium 5.4
Missing channel-state validation in Zephyr Bluetooth Classic L2CAP receive path
The Bluetooth Classic (BR/EDR) L2CAP receive handler bt_l2cap_br_recv() in subsys/bluetooth/host/classic/l2cap_br.c dispatched inbound data PDUs based only on the destination channel ID, without checking that the target channel had reached the BT_L2CAP_CONNEC…
-
Medium 6.5
IPv6 Neighbor Solicitation packet leak causes TX pool exhaustion denial of service
net_ipv6_send_ns() in subsys/net/ip/ipv6_nbr.c allocates a transmit net_pkt for a Neighbor Solicitation. When it is called with a data packet pending on an unresolved neighbor and that neighbor's pending_queue is already non-empty (an NS is already outstandin…
-
Medium 6.5
Ethernet bridge RX packet leak enables denial of service via RX buffer-pool exhaustion
When Ethernet bridging is enabled (CONFIG_NET_ETHERNET_BRIDGE), eth_bridge_input_process() in subsys/net/l2/ethernet/bridge/bridge_input.c decides how each frame received on a bridge member interface is handled. For frames that must also be delivered to the l…
-
Medium 5.4
Off-by-one out-of-bounds NUL write in Zephyr LwM2M JSON string parser
The LwM2M JSON content formatter's get_string() in subsys/net/lib/lwm2m/lwm2m_rw_json.c copies a parsed JSON string into a caller-supplied buffer and NUL-terminates it. The length guard used if (string_length > buflen), which accepts a string whose length is …
-
Low 3.1
I3C IBI work-node free-list data race between ISR and workqueue thread
The I3C IBI subsystem in drivers/i3c/i3c_ibi_workq.c hands out statically-allocated work nodes through a free-list i3c_ibi_work_nodes_free implemented as a plain sys_slist_t, which provides no synchronization. The allocation helpers (i3c_ibi_work_enqueue, i3c…
-
Medium 6.4
SiWx91x WiFi driver double-unref / use-after-free of caller-owned TX net_pkt
The Silicon Labs SiWx917 WiFi driver's transmit callback siwx91x_send() in drivers/wifi/siwx91x/siwx91x_wifi.c frees a network packet it does not own. In the Zephyr TX path the net_pkt is owned by the L2/networking stack; the driver only borrows it to copy th…
-
Low 3.7
WireGuard keepalive transport-data messages accepted without Poly1305 authentication
Zephyr's WireGuard implementation in subsys/net/lib/wireguard/wg_crypto.c mishandled keepalive packets. In wg_process_data_message(), any type-4 transport-data message whose payload was exactly 16 bytes (an empty plaintext plus a bare Poly1305 tag, i.e. a kee…
-
Medium 6.5
Zephyr WireGuard mutates peer state before anti-replay check, enabling capture-replay endpoint hijack
Zephyr's WireGuard VPN data-plane receive handler wg_process_data_message() in subsys/net/lib/wireguard/wg_crypto.c validated the anti-replay counter too late. After AEAD decryption of a MESSAGE_TRANSPORT_DATA packet succeeded, the code committed several peer…
-
Medium 5.4
Out-of-bounds read in PTP management TLV TIME parsing in Zephyr net PTP
The IEEE 1588 PTP management-message parser in subsys/net/lib/ptp/tlv.c mishandles the PTP_MGMT_TIME management id. In tlv_mgmt_post_recv(), the PTP_MGMT_TIME case casts mgmt_tlv->data to a 10-byte struct ptp_timestamp and reads it (then byte-swaps and writes…
-
Low 3.1
Out-of-bounds read in LoRaWAN fragmented data block transport (FUOTA) downlink handler
The LoRaWAN TS004 Fragmented Data Block Transport handler frag_transport_package_callback() in subsys/lorawan/services/frag_transport.c parses downlink command bytes without validating that enough payload bytes remain before each access. The loop's only bound…
-
Low 3.1
Out-of-bounds read in LoRaWAN clock-sync AppTimeAns downlink handler
The LoRaWAN application-layer clock-synchronization service parses downlinks in clock_sync_package_callback() (subsys/lorawan/services/clock_sync.c). Its command loop only guarantees that the one-byte command id is in bounds; for the CLOCK_SYNC_CMD_APP_TIME (…
-
Medium 5.5
Out-of-bounds read in Zephyr ext2 block-bitmap validation from a crafted s_blocks_count
The Zephyr ext2 filesystem driver validates the on-disk block bitmap in ext2_init_fs() (subsys/fs/ext2/ext2_impl.c) by passing fs_blocks = s_blocks_count - s_first_data_block to ext2_bitmap_count_set(). That helper (subsys/fs/ext2/ext2_bitmap.c) treats its ar…