Category
ICS / OT
4,112 known vulnerabilities.
4,112 results · Feed
-
High 8.7
CWE-522 Insufficiently Protected Credentials vulnerability exists that could cause authentication bypass and unauthoriz…
-
Medium 6.5
Out-of-bounds Write in CODESYS PROFINET Controller
An out‑of‑bounds write vulnerability in the CODESYS PROFINET Controller allows an unauthenticated attacker on the same network segment to send malformed PROFINET communication data that triggers an exception in the affected PLC application. The exception is h…
-
Medium 6.9
Audit Log Exposure through Unauthorized Access
Honeywell S35 Series 3M/5M/8M/PinHole Cameras, all versions prior to and including version HC5.26.1.14.20260207 contains an audit log disclosure Vulnerability that could allow an attacker to access audit logs without authentication, potentially resulting in t…
-
Medium 6.4
Integrity mechanism of KNX-device FW-files can be bypassed in ABB Update Tool
Missing support for integrity check vulnerability in ABB KNX Update Tool (ABB), ABB KNX Update Tool (BJE). This issue affects KNX Update Tool (ABB): through 2.0.175; KNX Update Tool (BJE): through 2.0.175.
-
High 8.7
Rockwell Automation Flex 5000® Adapter - Denial of Service
A denial-of-service security issue exists in the affected products. The security issue stems from improper handling of exceptional conditions when processing crafted CIP packets sent to the adapter. A power cycle is required to recover the module and associat…
-
High 7.3
Studio 5000 Logix Designer® – Multiple Vulnerabilities
A code execution security issue exists within Studio 5000 Logix Designer® due to an unquoted search path in the External Tools configuration. The executable paths specified in the external tools configuration file are not properly quoted, and because these pa…
-
High 8.2
Rockwell Automation CompactLogix® 5380 ControlLogix® 5580 / 1756-EN4 Communications Module – Certificate Revocation List Vulnerability
A security issue exists within CompactLogix® 5380, ControlLogix® 5580, and EN4 communication modules related to CIP Security certificate revocation handling. The security issue stems from the controller failing to properly reject certificates signed by an int…
-
High 7.3
Studio 5000 Logix Designer® – Multiple Vulnerabilities
A remote code execution security issue exists within Studio 5000 Logix Designer® due to incorrect authorization on a configuration file. This can allow any authenticated user to modify the paths of external tools configured within the application. If exploite…
-
Medium 5.4
Studio 5000 Logix Designer® – Multiple Vulnerabilities
A path traversal security issue exists within Studio 5000 Logix Designer® due to improper limitation of file paths within ACD project files. The software does not sanitize or validate file names embedded in the ACD file structure during the project opening pr…
-
High 7.2
ThinManager® - Path Traversal via API
A path traversal security issue exists within Rockwell Automation ThinManager® software due to improper limitation of file save operations within the API. An authenticated attacker could exploit this vulnerability to write arbitrary files to restricted system…
-
High 8.4
Rockwell Automation FactoryTalk® DataMosaix™ Private Cloud - Stored Cross-Site Scripting
A Stored Cross-Site Scripting security issue exists within FactoryTalk® DataMosaix™ Private Cloud. The vulnerability stems from improper neutralization of user-supplied input within the Workflows configuration. An authenticated attacker with high privileges c…
-
Critical 9.2
CompactLogix ®, ControlLogix ®, Compact GuardLogix ® and GuardLogix ® Buffer Overflow
A denial-of-service issue exists in 5380/5480/5580 controllers boot firmware lower than version 1.072. This vulnerability could potentially allow a malicious user to write invalid file data to the controller, causing the device to enter a major non-recoverabl…
-
Critical 9.2
CompactLogix ®, ControlLogix ®, Compact GuardLogix ® and GuardLogix ® Buffer Overflow
A denial-of-service issue exists in 5380/5480/5580 controllers. This vulnerability could potentially allow a malicious user to write invalid file data to the controller, causing the device to enter a major non-recoverable fault (MNRF).
-
Critical 9.2
CompactLogix ®, ControlLogix ®, Compact GuardLogix ® and GuardLogix ® Buffer Overflow
A denial-of-service issue exists in 5370/5570 controllers. This vulnerability could potentially allow a remote user to load an invalid project, causing the device to enter a major non-recoverable fault (MNRF).
-
High 8.8
Rockwell Automation FactoryTalk® Services Platform FTSP - Weak Authentication via JWT Validation Bypass
A security issue exists within FactoryTalk® Services Platform (FTSP), allowing an attacker to bypass JWT signature validation during Okta Web Authentication. The vulnerability stems from the application not verifying that the JWT algorithm is configured for R…
-
High 8.7
1756-EN2, 1756-EN3, and 1756-ENBT - Denial of Service via CIP Connection ID
A denial-of-service security issue exists across all the 1756-EN2, EN3, and ENBT communication module due to improper validation of CIP Implicit Connection packets. An attacker on the network can exploit this by sending crafted packets to continuously disrupt…
-
Medium 6.3
1734 POINT I/OTM - Denial of Service via Malformed Inputs on CIP Object
A denial-of-service security issue exists in 1734 POINT I/O™ module. The security issue stems from improper handling of crafted CIP messages, which can cause the module to enter a faulted state. A restart is required to recover.
-
High 8.7
1718-AENTR/1719-AENTR - Denial of Service
A denial-of-service security issue exists in the 1719-AENTR. The security issue stems from improper handling of a UDP unicast network storm, which causes the device to become overloaded and lose communication. A power cycle is required to recover.
-
Critical 10.0
Rockwell Automation 1715 Redundant IO – Access Control Vulnerability
A security issue exists within the 1715-AENTR EtherNet/IP Adapter. The affected product exposes a network-accessible debug port that does not enforce proper privilege controls, allowing unauthenticated remote access to intrusive command-line interface (CLI) c…
-
High 7.0
Rockwell Automation Arena® - Memory Corruption Vulnerability
A security issue exists within Arena® Simulation due to a memory corruption vulnerability in the siman.exe (Siman) component. The vulnerability stems from improper validation of user-supplied data, which can result in an out-of-bounds write. An attacker could…
-
High 7.0
Rockwell Automation Arena® - Memory Corruption Vulnerability
A security issue exists within Arena® Simulation due to a memory corruption vulnerability in the linker.exe (Siman) component. The vulnerability stems from improper validation of user-supplied data, which can result in an out-of-bounds write. An attacker coul…
-
High 7.0
Rockwell Automation Arena® - Memory Corruption Vulnerability
A security issue exists within Arena® Simulation due to a memory corruption vulnerability in the expmt.exe (Siman) component. The vulnerability stems from improper validation of user-supplied data, which can result in an out-of-bounds write. An attacker could…
-
High 7.0
Rockwell Automation Arena® - Memory Corruption Vulnerability
A security issue exists within Arena® Simulation due to a memory corruption vulnerability in the model.exe (Siman) component. The vulnerability stems from improper validation of user-supplied data, which can result in an out-of-bounds write. An attacker could…
-
Critical 10.0
A vulnerability has been identified in Opcenter X (All versions < V2604). Affected applications do not properly validat…
-
High 7.4
A vulnerability has been identified in SIMATIC S7-PLCSIM Advanced (All versions). Affected devices do not properly hand…
-
Medium 6.7
A vulnerability has been identified in COMOS V10.4.5 (All versions < V10.4.5.0.2), COMOS V10.6 (All versions < V10.6.1)…
-
Critical 9.8
Unauthenticated Access to Internal Diagnostic Interface
Certain devices in the WAGO System I/O Field series activate an internal diagnostic capability during the initial startup sequence. This functionality is not formally documented and becomes accessible without authentication for a brief period in the early boo…
-
High 7.2
A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V26.20), SICORE Base sys…
-
Medium 4.8
A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V26.20), SICORE Base sys…
-
Medium 6.7
A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V26.20), SICORE Base sys…
-
Medium 6.5
A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V26.20), SICORE Base sys…
-
Medium 5.4
A vulnerability has been identified in Mendix Studio Pro 10.11 (All versions), Mendix Studio Pro 10.12 (All versions), …
-
High 7.0
PROMOD V is using insecure HTTP communication instead of HTTPS. The vulnerability is due to the lack of HTTPS support f…
-
Medium 5.9
Lack of signature verification before execution of downloaded content
Honeywell IQ MultiAccess, all versions prior to and including version 28, contain an improper digital signature verification vulnerability. An attacker could potentially exploit this vulnerability, leading to the replacement of downloaded file with a maliciou…
-
Medium 6.9
CWE-617 Reachable Assertion vulnerability exists that could allow an authenticated attacker to trigger a denial-of-serv…
-
High 8.6
CWE-78 Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that coul…
-
High 8.7
CWE-476 NULL Pointer Dereference vulnerability exists that could cause a denial-of-service condition, rendering the dev…
-
Medium 6.7
CWE-732 Incorrect Permission Assignment for Critical Resource vulnerability that could cause unauthorized disclosure of…
-
High 8.7
CWE-522 Insufficiently Protected Credentials vulnerability that could cause unauthorized access and exposure of sensiti…
-
Medium 4.4
Advant Master Online Builder DLL vulnerability
Uncontrolled Search Path Element vulnerability in ABB Control Builder A, ABB 800xA for Advant Master. This issue affects Control Builder A: through 1.4/4; 800xA for Advant Master: through 6.0.3-1, through 6.1.1-1, 6.1.1-3, 6.2.0-1.