Weakness (CWE)
CWE-1392: Use of Default Credentials
The product uses default credentials (such as passwords or cryptographic keys) for potentially critical functionality.
How to prevent it (3 mitigations)
-
Requirements
Prohibit use of default, hard-coded, or other values that do not vary for each installation of the product - especially for separate organizations.
-
Architecture and Design
Force the administrator to change the credential upon installation.
-
Installation, Operation
The product administrator could change the defaults upon installation or during operation.
Source: MITRE CWE-1392
54 results · Clear filters · Feed
-
Critical 9.8
INDOTALENT WHMS before 10.20261109 Default Administrator Credentials via UserAdminSeeder
INDOTALENT WHMS before 10.20261109 contains a default credentials vulnerability that allows unauthenticated attackers to gain administrator access because UserAdminSeeder creates admin@root.com with password 123456. Attackers can log in with these credentials…
-
Critical 9.8
Etrel INCH AC Charging Station Hard-coded Default Credentials
Etrel INCH AC charging station management web interface prior to firmware versions 7.1.2 and 8.0.1 contains a hard-coded default credentials vulnerability that allows remote attackers to gain full Administrator access by authenticating with the factory-defaul…
-
Critical 9.8
DB-GPT through 0.8.2 Hardcoded MySQL Root Credentials in docker-compose Deployment
DB-GPT through 0.8.2 contains a hardcoded credentials vulnerability in its default docker-compose.yml that sets a static MYSQL_ROOT_PASSWORD and publishes port 3306 on all interfaces. Attackers reaching port 3306 or the shared dbgptnet network can authenticat…
-
Critical 9.8
FlyCms through commit edfdf724 Default Super Administrator Credentials
FlyCms through commit edfdf724 contains a default credentials vulnerability that allows unauthenticated remote attackers to gain super administrator access via the flycms account with password admin123. Attackers can log in through POST /api/auth/login, solvi…
-
Critical 9.8
Vanus 0.8.0 through 0.9.0 Default Admin Credentials via Gateway
Vanus 0.8.0 through 0.9.0 contains a default credentials vulnerability that allows unauthenticated remote attackers to gain cluster-admin access by using the hardcoded admin token. Attackers can send the fixed Bearer token to the gateway gRPC proxy port to ma…
-
Critical 9.8
DataBuff ai-apm-web through 0.1.10 Hard-Coded Default Admin Credentials
DataBuff ai-apm-web through 0.1.10 contains a hard-coded default credentials vulnerability that allows unauthenticated attackers to gain administrator access using the built-in admin/Databuff@123 account. Attackers can POST these credentials to /webapi/api/v1…
-
Critical 9.8
JuggleIM im-server through 1.8.16 Default Admin Credentials in Admin Console
JuggleIM im-server through 1.8.16 ships default administrator credentials admin/123456 that allow unauthenticated remote attackers to access the admin console on port 8090. Attackers can log in as administrator, even after account deletion since CheckLogin re…
-
Critical 9.9
Astron Agent: Unsandboxed code-node leads to cross-tenant RCE
Astron Agent is an agentic workflow platform for building and running AI agents. Prior to 1.1.2, the default workflow code-node path through /console-api/workflow/code/run and /workflow/v1/run selects LocalExecutor in core/workflow/engine/nodes/code/code_node…
-
Critical 10.0
Authentication bypass via default auth token in P4Search
Perforce P4 Search container images prior to 2026.4.2 reset the service authentication token to a publicly documented default value. An unauthenticated attacker with network access can obtain the highest application privilege, potentially leading to arbitrary…
-
Critical 9.8
Default Admin Credentials in Innotim Software's Logsign SIEM
Use of default credentials vulnerability in Innotim Software, Telecommunications and Consultancy Trade Ltd. Co. Logsign SIEM allows Try Common or Default Usernames and Passwords. This issue affects Logsign SIEM: from 6.4.101 before 6.4.117.
-
Critical 9.1
X-SpringBoot through 6.0 Authentication Bypass via Static Master Code
X-SpringBoot through 6.0 ships with a hardcoded static master login verification code 172839 enabled by default in the database seed. Unauthenticated attackers can authenticate as any user by submitting the public master code to the emailOrMobileLogin endpoin…
-
Critical 9.8
IBM ContextForge MCP Gateway is affected by use of default credentials
IBM ContextForge MCP Gateway 1.0.0 through 1.0.7 could allow a remote attacker to gain administrative access due to the use of default credentials.
-
Critical 9.9
In the current development version of Eclipse aeriOS, for which no official release has yet been published, the Identit…
-
Critical 9.3
Datiphy Data Management Center - Use of Default Credentials
Use of default credentials in Datiphy Data Management Center from v8.3.0 through v8.5.1 allows a remote attacker to gain administrative access to the management platform by logging in with default administrator credentials.
-
Critical 9.8
LazyOwn: Default C2 Operator Credentials Enable Administrative Access to C2 Dashboard
LazyOwn RedTeam/APT Framework is an AI-powered C2 and red-team operations framework. Prior to 0.2.154, LazyOwn ships default C2 credentials LazyOwn and LazyOwn in payload.json and core/payload_schema.py and passes them unchanged to lazyc2.py HTTP Basic authen…
-
Critical 9.8
Care Everywhere Gateway 14.3.10 Hard-coded Credentials RCE via WildFly
Care Everywhere Gateway 14.3.10 contains a hard-coded credentials vulnerability in the bundled WildFly 8.2.0.Final management interface that allows unauthenticated remote attackers to gain administrative access by using default credentials identical across al…
-
Critical 10.0
Pheditor: Authentication Bypass in Forced Password-Change Flow via Unverified Current Password
## Summary The forced password-change flow, triggered when the stored password is still the default (`admin`), does not verify that the password submitted by the client actually matches the current password. Any non-empty value in `pheditor_password` is enoug…
-
Critical 9.1
Insecure Sample Credentials in SAP Commerce Cloud
SAP Commerce Cloud could retain a sample OAuth2 client with publicly documented sample credentials originating from sample configuration provided in SAP Help Portal documentation. If left unchanged, an unauthenticated attacker could use these well-known crede…
-
Critical 9.8
AutoBangumi < 3.2.8 - Hard-coded Default Credentials via add_default_user()
AutoBangumi before 3.2.8 contains a hard-coded default credentials vulnerability that allows unauthenticated attackers to authenticate as the administrator by using the publicly known default credentials seeded at startup via add_default_user() in the databas…
-
Critical 9.8
JAIOTlink C492A-W6 4.8.30.57701411 Hard-coded Credentials via anyka_ipc
JAIOTlink C492A-W6 Wi-Fi IP cameras running firmware 4.8.30.57701411 contain a hard-coded credentials vulnerability that allows network-adjacent attackers to gain unauthorized access by using the default admin username with an empty password accepted by the a…
-
Critical 9.9
OpenProject: Pre-authentication RCE in openproject/openproject Docker image via default `SECRET_KEY_BASE=OVERWRITE_ME` and `cookies_serializer = :marshal`
OpenProject is open-source, web-based project management software. Prior to , the official openproject/openproject Docker image ships ENV SECRET_KEY_BASE=OVERWRITE_ME as the default Rails master key. Combined with cookies_serializer = :marshal, this gives any…
-
Critical 9.8
RustFS: Internode RPC HMAC secret falls back to public default credential, enabling peer impersonation
RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.2, the internode RPC layer authenticates every request with an HMAC-SHA256 signature using a shared secret. The function that produces this secret, get_shared_secret() in crates/…
-
Critical 9.8
Tyler Identity Local (TID-L) default administrative credentials
Tyler Identity Local (TID-L) uses documented, default administrative credentials. Users are not required to change the credentials before deployment. TID-L has not been distributed since December 2020, and has not been supported since 2021.
-
Critical 9.2
Insecure default administrative credentials in AlloyDB for PostgreSQL
Prior to 2025-11-03, well-intended users of Terraform or REST API for Google Cloud AlloyDB for PostgreSQL could have created clusters with an insecure default password which could have been exploited by a remote attacker to gain full administrative access to …
-
Critical 9.8
Nornicdb: Improper Network Binding in NornicDB Bolt Server allows unauthorized remote access
Nornicdb is a distributed low-latency, Graph+Vector, Temporal MVCC with all sub-ms HNSW search, graph traversal, and writes. Prior to version 1.0.42-hotfix, the --address CLI flag (and NORNICDB_ADDRESS / server.host config key) is plumbed through to the HTTP …
-
Critical 9.0
netbox-docker before 2.5.0 has a superuser account with default credentials (admin password for the admin account, and …
-
Critical 9.8
OpenMQ exposes a TCP-based management service (imqbrokerd) that by default requires authentication. However, the produc…
-
Critical 9.8
SODOLA SL902-SWTGW124AS <= 200.1.20 Use of Default Credentials
SODOLA SL902-SWTGW124AS firmware versions through 200.1.20 contain a default credentials vulnerability that allows remote attackers to obtain administrative access to the management interface. Attackers can authenticate using the hardcoded default credentials…
-
Critical 9.3CVE-2026-26341 Scanner template
Tattile Smart+ / Vega / Basic <= 1.181.5 Default Credentials
Tattile Smart+, Vega, and Basic device families firmware versions 1.181.5 and prior ship with default credentials that are not forced to be changed during installation or commissioning. An attacker who can reach the management interface can authenticate using…
-
Critical 9.8
JUNG eNet SMART HOME server 2.2.1/2.3.1 Use of Default Credentials
eNet SMART HOME server 2.2.1 and 2.3.1 ships with default credentials (user:user, admin:admin) that remain active after installation and commissioning without enforcing a mandatory password change. Unauthenticated attackers can use these default credentials t…
-
Critical 9.2
Weak Default Passwords in dormakaba access manager
By default, the password for the Access Manager's web interface, is set to 'admin'. In the tested version changing the password was not enforced.
-
Critical 9.8
JM-DATA ONU JF511-TV 1.0.67 Default Credentials Vulnerability
JM-DATA ONU JF511-TV version 1.0.67 uses default credentials that allow attackers to gain unauthorized access to the device with administrative privileges.
-
Critical 9.3
COMMAX CVD-Axx DVR Weak Default Credentials Stream Disclosure
COMMAX CVD-Axx DVR 5.1.4 contains weak default administrative credentials that allow remote password attacks and disclose RTSP stream. Attackers can exploit this by sending a POST request with the 'passkey' parameter set to '1234', allowing them to access the…
-
Critical 9.8
The Thermo Fisher Torrent Suite Django application 5.18.1 has weak default credentials, which are stored as fixtures fo…
-
Critical 9.3
Use of default login credentials in Legacy Vivotek Devices
Legacy Vivotek Device firmware uses default credetials for the root and user login accounts.
-
Critical 10.0
Weak Default Credentials
Weak Default Credentials.This issue affects BLU-IC2: through 1.19.5; BLU-IC4: through 1.19.5.
-
Critical 9.3
Admin with default credentials in NetBird VPN
NetBird VPN when installed using vendor's provided script failed to remove or change default password of an admin account created by ZITADEL. This issue affects instances installed using vendor's provided script. This issue may affect instances created with D…
-
Critical 9.3
Ilevia EVE X1 Server 4.7.18.0.eden Use of Default Credentials
Ilevia EVE X1 Server firmware versions ≤ 4.7.18.0.eden contain a use of default credentials vulnerability that allows an unauthenticated attacker to obtain remote access. Ilevia has declined to service this vulnerability, and recommends that customers not exp…
-
Critical 9.8
Insecure Default Admin Credentials Enable Full Administrative Access in iMonitor EAM
iMonitor EAM 9.6394 ships with default administrative credentials that are also displayed within the management client’s connection dialog. If the administrator does not change these defaults, a remote attacker can authenticate to the EAM server and gain full…
-
Critical 9.8
Airship AI Acropolis default credentials
Airship AI Acropolis includes a default administrative account that uses the same credentials on every installation. Instances of Airship AI that do not change this account password are vulnerable to a remote attacker logging in and gaining the privileges of …