Weakness (CWE)
CWE-1392: Use of Default Credentials
The product uses default credentials (such as passwords or cryptographic keys) for potentially critical functionality.
How to prevent it (3 mitigations)
-
Requirements
Prohibit use of default, hard-coded, or other values that do not vary for each installation of the product - especially for separate organizations.
-
Architecture and Design
Force the administrator to change the credential upon installation.
-
Installation, Operation
The product administrator could change the defaults upon installation or during operation.
Source: MITRE CWE-1392
139 results · Feed
-
Critical 9.8
INDOTALENT WHMS before 10.20261109 Default Administrator Credentials via UserAdminSeeder
INDOTALENT WHMS before 10.20261109 contains a default credentials vulnerability that allows unauthenticated attackers to gain administrator access because UserAdminSeeder creates admin@root.com with password 123456. Attackers can log in with these credentials…
-
Medium 6.5
OpenAM before 16.1.4 Default Credentials in Built-in Accounts Allow Unauthenticated Login
OpenAM before 16.1.4 ships built-in identities in the Top Level Realm (demo, anonymous, wsc, wsp, SecurityTokenService and agentAuth) with passwords that are identical on every installation, publicly known, and able to authenticate. Unauthenticated remote att…
-
High 8.3
Hisense VIDAA Smart TV MQTT Broker Authentication Bypass
Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains an authentication bypass vulnerability in its remote-control MQTT broker on TCP port 36669, which accepts publicly documented default credentials and an ineffective 4-digit pairing PIN with no rate l…
-
High 7.2
IRISPowerscan Default accounts with predictable credentials
IRISPowerscan contain default user accounts with predictable credentials. An unauthenticated attacker with access to an affected installation could use these credentials to authenticate to the application and access functionality available to the affected acc…
-
Critical 9.8
Etrel INCH AC Charging Station Hard-coded Default Credentials
Etrel INCH AC charging station management web interface prior to firmware versions 7.1.2 and 8.0.1 contains a hard-coded default credentials vulnerability that allows remote attackers to gain full Administrator access by authenticating with the factory-defaul…
-
High 8.7
Use of default password based on serial number
Delta UFC500 charging stations derive the default credentials of the Service account from character positions of the device serial number. An unauthenticated attacker with adjacent network access can reconstruct the resulting password, or exhaust the keyspace…
-
High 8.4
Default WebUI passwords stored in plaintext
The shipped WebUI template database retains the factory default passwords for all five account types in cleartext. Defaults are identical across devices and were unchanged on the tested unit.
-
High 7.1
Use of Default Credentials in boneIO
boneIO black_debian_images ships with a Mosquitto MQTT broker that uses the same default credentials on all devices. These credentials are publicly documented on github, and there is no indication in the instructions to change them. A remote attacker can use …
-
High 7.5
OpenThread joiner autostart uses a publicly documented default Joining Device Credential (PSKd)
Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device …
-
High 7.4
Goobi viewer: Empty webapi.authorization.token default permits unauthenticated authorization bypass
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, Configuration.getWebApiToken returns the empty string when webapi.authorization.token is not configured. AuthorizationFilter compare…
-
Critical 9.8
DB-GPT through 0.8.2 Hardcoded MySQL Root Credentials in docker-compose Deployment
DB-GPT through 0.8.2 contains a hardcoded credentials vulnerability in its default docker-compose.yml that sets a static MYSQL_ROOT_PASSWORD and publishes port 3306 on all interfaces. Attackers reaching port 3306 or the shared dbgptnet network can authenticat…
-
Critical 9.8
FlyCms through commit edfdf724 Default Super Administrator Credentials
FlyCms through commit edfdf724 contains a default credentials vulnerability that allows unauthenticated remote attackers to gain super administrator access via the flycms account with password admin123. Attackers can log in through POST /api/auth/login, solvi…
-
Critical 9.8
Vanus 0.8.0 through 0.9.0 Default Admin Credentials via Gateway
Vanus 0.8.0 through 0.9.0 contains a default credentials vulnerability that allows unauthenticated remote attackers to gain cluster-admin access by using the hardcoded admin token. Attackers can send the fixed Bearer token to the gateway gRPC proxy port to ma…
-
Critical 9.8
DataBuff ai-apm-web through 0.1.10 Hard-Coded Default Admin Credentials
DataBuff ai-apm-web through 0.1.10 contains a hard-coded default credentials vulnerability that allows unauthenticated attackers to gain administrator access using the built-in admin/Databuff@123 account. Attackers can POST these credentials to /webapi/api/v1…
-
Critical 9.8
JuggleIM im-server through 1.8.16 Default Admin Credentials in Admin Console
JuggleIM im-server through 1.8.16 ships default administrator credentials admin/123456 that allow unauthenticated remote attackers to access the admin console on port 8090. Attackers can log in as administrator, even after account deletion since CheckLogin re…
-
High 7.3
PRVTPRO Amnezia-Web-Panel Backup Download app.py default credentials
A security vulnerability has been detected in PRVTPRO Amnezia-Web-Panel up to 1.6.2/1.7.2. This affects an unknown part of the file app.py of the component Backup Download. The manipulation leads to use of default credentials. The attack can be initiated remo…
-
Critical 9.9
Astron Agent: Unsandboxed code-node leads to cross-tenant RCE
Astron Agent is an agentic workflow platform for building and running AI agents. Prior to 1.1.2, the default workflow code-node path through /console-api/workflow/code/run and /workflow/v1/run selects LocalExecutor in core/workflow/engine/nodes/code/code_node…
-
Critical 10.0
Authentication bypass via default auth token in P4Search
Perforce P4 Search container images prior to 2026.4.2 reset the service authentication token to a publicly documented default value. An unauthenticated attacker with network access can obtain the highest application privilege, potentially leading to arbitrary…
-
Critical 9.8
Default Admin Credentials in Innotim Software's Logsign SIEM
Use of default credentials vulnerability in Innotim Software, Telecommunications and Consultancy Trade Ltd. Co. Logsign SIEM allows Try Common or Default Usernames and Passwords. This issue affects Logsign SIEM: from 6.4.101 before 6.4.117.
-
Critical 9.1
X-SpringBoot through 6.0 Authentication Bypass via Static Master Code
X-SpringBoot through 6.0 ships with a hardcoded static master login verification code 172839 enabled by default in the database seed. Unauthenticated attackers can authenticate as any user by submitting the public master code to the emailOrMobileLogin endpoin…
-
Medium 4.7
ningzichun student-management-system example_lite.sql default credentials
A flaw has been found in ningzichun student-management-system up to 98760f5711cf6dc8b4adca53a9e207ca49b02ebf. Affected by this vulnerability is an unknown functionality of the file example_lite.sql. Executing a manipulation can lead to use of default credenti…
-
Medium 5.3
novel-plus through 5.3.3 Default Cache Management Password in the Front Portal
novel-plus through 5.3.3 contains an insecure default cache-management password in the CacheController.refreshCache endpoint that allows anonymous attackers to invalidate portal caches by supplying the hardcoded default value in the URL path. Attackers can tr…
-
High 7.3
lenve vhr vhr.sql default credentials
A vulnerability was identified in lenve vhr 1.0-SNAPSHOT. Affected by this issue is some unknown functionality of the file vhr.sql. The manipulation leads to use of default credentials. Remote exploitation of the attack is possible. The exploit is publicly av…
-
High 8.1
Use of default credentials in Malcolm
An example environment-configuration file for a bundled inventory-management component ships with a fixed, publicly-known administrative password. A deployment that copies this example file into active configuration without running the setup routine that rege…
-
Medium 5.9
Use of Default Credentials in Malcolm
An example environment-configuration file ships with a fixed, publicly-known secret value used to sign authentication cookies for a bundled packet-analysis component. A deployment that copies this example file into active configuration without running the set…
-
Critical 9.8
IBM ContextForge MCP Gateway is affected by use of default credentials
IBM ContextForge MCP Gateway 1.0.0 through 1.0.7 could allow a remote attacker to gain administrative access due to the use of default credentials.
-
Critical 9.9
In the current development version of Eclipse aeriOS, for which no official release has yet been published, the Identit…
-
Critical 9.3
Datiphy Data Management Center - Use of Default Credentials
Use of default credentials in Datiphy Data Management Center from v8.3.0 through v8.5.1 allows a remote attacker to gain administrative access to the management platform by logging in with default administrator credentials.
-
High —
GeoLens's authorization and cache-scope flaws disclose private dataset data and metadata to unauthorized users (fixed in 1.2.4)
GeoLens 1.2.4 fixes a set of vulnerabilities, the most serious of which allow authenticated or anonymous users to obtain data and metadata for datasets they are not authorized to access. ### Impact - **Private record metadata disclosure.** Record contact, key…
-
High 8.1
Use of hard-coded VNC credentials in the engineering-workstation provisioning
A provisioning script used when installing HIPASE-250 (formerly 250 SCALA) engineering workstations sets a fixed, hard-coded x11vnc password. Because the same credential is applied to every workstation provisioned this way, an attacker with adjacent-network a…
-
Critical 9.8
LazyOwn: Default C2 Operator Credentials Enable Administrative Access to C2 Dashboard
LazyOwn RedTeam/APT Framework is an AI-powered C2 and red-team operations framework. Prior to 0.2.154, LazyOwn ships default C2 credentials LazyOwn and LazyOwn in payload.json and core/payload_schema.py and passes them unchanged to lazyc2.py HTTP Basic authen…
-
Critical 9.8
Care Everywhere Gateway 14.3.10 Hard-coded Credentials RCE via WildFly
Care Everywhere Gateway 14.3.10 contains a hard-coded credentials vulnerability in the bundled WildFly 8.2.0.Final management interface that allows unauthenticated remote attackers to gain administrative access by using default credentials identical across al…
-
Critical 10.0
Pheditor: Authentication Bypass in Forced Password-Change Flow via Unverified Current Password
## Summary The forced password-change flow, triggered when the stored password is still the default (`admin`), does not verify that the password submitted by the client actually matches the current password. Any non-empty value in `pheditor_password` is enoug…
-
Critical 9.1
Insecure Sample Credentials in SAP Commerce Cloud
SAP Commerce Cloud could retain a sample OAuth2 client with publicly documented sample credentials originating from sample configuration provided in SAP Help Portal documentation. If left unchanged, an unauthenticated attacker could use these well-known crede…
-
High 8.1
IBM API Connect Default Credentials
IBM API Connect 12.1.0.0 through 12.1.0.3 uses default credentials which could allow an attacker to gain unauthorized access to the application before the system enforces a credential update.
-
Critical 9.8
AutoBangumi < 3.2.8 - Hard-coded Default Credentials via add_default_user()
AutoBangumi before 3.2.8 contains a hard-coded default credentials vulnerability that allows unauthenticated attackers to authenticate as the administrator by using the publicly known default credentials seeded at startup via add_default_user() in the databas…
-
Critical 9.8
JAIOTlink C492A-W6 4.8.30.57701411 Hard-coded Credentials via anyka_ipc
JAIOTlink C492A-W6 Wi-Fi IP cameras running firmware 4.8.30.57701411 contain a hard-coded credentials vulnerability that allows network-adjacent attackers to gain unauthorized access by using the default admin username with an empty password accepted by the a…
-
Critical 9.9
OpenProject: Pre-authentication RCE in openproject/openproject Docker image via default `SECRET_KEY_BASE=OVERWRITE_ME` and `cookies_serializer = :marshal`
OpenProject is open-source, web-based project management software. Prior to , the official openproject/openproject Docker image ships ENV SECRET_KEY_BASE=OVERWRITE_ME as the default Rails master key. Combined with cookies_serializer = :marshal, this gives any…
-
Medium 6.0
Dell Wyse Management Suite (WMS), versions prior to WMS 2605, contain a Use of Default Credentials vulnerability. A hig…
-
High 7.8
Dell AIOps Collector versions prior to 1.18.3 contain a "Use of Default Credentials" vulnerability. A low privileged at…