68 results · Feed
-
Medium 4.5
Malicious client could set xattr value outside of BuildKit state directory
In BuildKit versions prior to v0.34.1, a malicious client with access to the BuildKit control APIs can submit a build request that sets an extended attribute on a file outside the BuildKit state directory. Extended attributes in the trusted. or security. name…
-
High 8.7
compress zstd: Panic on two-block frames
compress provides various compression algorithms. Prior to 1.20.2, the zstd DecodeAll and streaming decoder paths can panic when a crafted two-block frame reaches huff0.ReadTable with an FSE normalized count of 32768 that readNCount stores in int16 as -32768.…
-
Medium 4.6
containerd: Unpack DoS via repeated opaque whiteouts
containerd is an open-source container runtime. Prior to 1.7.35, 2.0.12, 2.2.8, and 2.3.5, containerd's layer unpack handler repeatedly traverses directories for certain opaque whiteout configurations. A malicious image layer can trigger repeated directory tr…
-
High 7.5
HTTP/2 server crash due to HPACK encoder race in net/http
HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part …
-
High 7.5
HTTP/2 transport accepts malformed framing-related headers in net/http
Historically, we have been rather lax about malformed framing-related headers in our HTTP/2 implementation, as they cannot interfere with HTTP/2 framing. However, this makes it possible for our HTTP/2 implementation to forward responses containing such header…
-
Critical 9.1
Double flow control refund on HTTP/2 server streams in net/http
The HTTP/2 server can refund connection-level flow control twice for the same data: Once when a client resets a stream (refunding data for any sent-but-unread portion of the stream), and again when a request handler reads the buffered data. A malicious client…
-
High 7.5
Excessive CPU consumption from repeated initial window changes in net/http
A malicious HTTP/2 peer can cause excessive CPU consumption in the client or server by opening a large number of streams and then sending many small SETTINGS frames containing SETTINGS_INITIAL_WINDOW_SIZE values.
-
High 7.5
HTTP/2 server memory exhaustion due to Trailer headers in net/http
When "Trailer" headers are sent by a client, the HTTP server internally uses the header values to populate the Request.Trailer map passed to the server handler. Because Request.Trailer is a map, each entry incurs memory overhead. For HTTP/2 servers, a malicio…
-
Medium 5.5
github.com/moby/sys/user has a possible DoS via unbounded parsing of user and group database files
The `github.com/moby/sys/user` package provides Go utilities for parsing and looking up entries in Unix-style user and group database files. Versions before 0.4.1 do not sufficiently limit entries when parsing `/etc/passwd`- or `/etc/group`-style files, allow…
-
High 7.6
Docker Engine insecure-registry fallback via malicious DNS responses
Docker Engine classifies a registry hostname as insecure using an any-match DNS check. loadInsecureRegistries() injects 127.0.0.0/8 and ::1/128 as insecure CIDRs by default. isCIDRMatch resolves all of the hostname's addresses and returns true if a single add…
-
Medium 6.9
Blind VXLAN injection into encrypted overlay networks from cluster peer
The firewall rules which mark VXLAN datagrams for encryption indiscriminately match both authentic VXLAN datagrams sent from the kernel and forged datagrams sent by user processes. Any packet sent from the host network namespace of a Linux Swarm node is encry…
-
Medium 6.9
Malformed LLB file operation can crash buildkitd
A malicious frontend can submit an LLB definition that causes buildkitd to panic and terminate, interrupting all builds running on that daemon.
-
Medium 6.0
Crafted Git build source can bypass certain policy validation
A build step for a Git source, crafted in a specific way, can bypass some policy validation rules. A malicious build definition can make the repository look like it is coming from a different remote URL than it really is when Git clone is happening. If policy…
-
Medium 6.8
Oversized Dockerfile or .dockerignore can exhaust buildkitd memory
The Dockerfile frontend loaded the Dockerfile and .dockerignore files of a build context into memory without a size limit. A build context containing an oversized file could make buildkitd allocate memory proportional to that file, potentially exhausting memo…
-
Medium 6.9
Malformed MergeOp can crash the BuildKit daemon
A malicious frontend can submit an LLB definition that causes buildkitd to panic and terminate, interrupting all builds running on that daemon.
-
Medium 6.0
BuildKit improperly handles special files in build snapshots
BuildKit may be tricked into performing file actions with special file inodes where regular files are expected. Special files may block operations or, on rootful workers, allow unintended host device access.
-
Medium 5.7
A malicious frontend can cause a daemon panic
A malicious external BuildKit frontend can send requests using the internal API that can create conditions for a data race that can cause the BuildKit daemon to panic.
-
High 7.5
Cache poisoning via unvalidated image layer DiffIDs
A malicious image can advertise DiffIDs from another image while containing different layer contents. In affected versions, BuildKit could use the advertised DiffIDs to derive cache and snapshot identity without validating that they matched the actual layer c…
-
Medium 5.1
OpenTelemetry-Go: UTF-8 replacement rune bypasses attribute length truncation
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 1.10.0 until 1.33.0, the sdk/trace/span.go attribute truncation path can fail to enforce AttributeValueLengthLimit for string and string-slice attributes containing the valid Unicode rep…
-
Low 2.0
OpenTelemetry-Go: Exporter config logging may leak endpoint URLs in info logs
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 1.5.0 to 1.44.0, sdk/trace.NewTracerProvider emits a TracerProvider created internal Info-level diagnostic event whose MarshalLog implementations recursively include span processor, expo…
-
Medium 4.4
Podman: buildah: skopeo: containers/storage: malicious tar whiteout header allows replacement of extraction destination directory
A flaw was found in the containers/storage library. A crafted tar archive containing a malicious whiteout header (e.g. victim/.wh.) can cause the extraction destination directory to be replaced with an arbitrary file when processed by storage/pkg/archive.Unpa…
-
High 8.7
gRPC-Go: Denial of Service (DoS) via crash due to missing `:authority` and `Host` headers in the xDS servers
gRPC-Go is the Go language implementation of gRPC. Prior to 1.82.2 and 1.83.2, servers created with xds.NewGRPCServer() allow internal/transport/http2_server.go to accept an RPC containing neither the :authority header nor the Host header, while RouteAndProce…
-
High 7.5
Prevent DoS on deadlocked established channel in golang.org/x/crypto/ssh
Previously, after a channel has been established, a malicious peer could send crafted messages that would deadlock the entire connection. Now, we handle all RFC 4254 channel messages; global requests are handled explicitly. Then, treat all other messages as a…
-
High 7.5
Prevent DoS on deadlocked undecided channel in golang.org/x/crypto/ssh
Previously, a channel registered in the mux's chanList is not usable until it is established. A malicious peer was able flood the channel's incomingRequests, deadlocking the entire connection. Now, we add an atomic established state, set when a channel become…
-
High 8.7
gRPC-Go: Heap Memory Exhaustion (OOM) via HTTP/2 DATA Frame Fragmentation
gRPC-Go is the Go language implementation of gRPC. Prior to 1.83.1, internal/transport/transport.go stores each fragmented HTTP/2 DATA frame as a separate recvMsg in recvBuffer, so millions of one-byte frames can consume disproportionate heap memory even when…
-
Critical 9.8
grpc-gateway v2.28.0 is vulnerable to Incorrect Access Control. The application processes the X-HTTP-Method-Override he…
-
High 7.2
BuildKit: Malicious client can bypass destination directory validation on local sources upload
BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Prior to 0.31.2, a custom client can produce such an upload request to the BuildKit daemon that files can escape from the BuildKit-controlle…
-
Medium 5.3
BuildKit: Custom frontend could bypass Seccomp/AppArmor
BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Prior to 0.31.1, a custom frontend could place an invalid SecurityMode value in a crafted build request, and executor/oci/spec_linux.go trea…
-
Low 2.3
BuildKit: Possible runtime DoS via unbounded group parsing
BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Prior to 0.31.1, BuildKit read attacker-controlled /etc/passwd and /etc/group files without an upper bound while resolving a username to a u…
-
High 7.1CVE-2026-17106 Public exploit
Tar extraction in moby/go-archive can write outside the destination directory via link following
The tar extraction routines in moby/go-archive (Unpack, UnpackLayer, Untar/UntarUncompressed, and the ApplyLayer helpers) do not confine filesystem operations to the destination directory. The extractor decides where each archive entry lands using lexical str…
-
High 7.5CVE-2026-56852 Public exploit
Infinite loop on invalid input in golang.org/x/text
A norm.Iter can enter an infinite loop when handling input containing invalid UTF-8 bytes.
-
Critical 9.6
Invoking failure to reject ASCII-only Punycode-encoded labels in golang.org/x/net/idna
The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege …
-
High 7.5
Invoking pathological RSA/DSA parameters may cause DoS in golang.org/x/crypto/ssh
The RSA and DSA public key parsers did not enforce size limits on key parameters. A crafted public key with an excessively large modulus or DSA parameter could cause several minutes of CPU consumption during signature verification. This could be triggered by …
-
Critical 9.1
Invoking client can cause server deadlock on unexpected responses in golang.org/x/crypto/ssh
A malicious SSH peer could send unsolicited global request responses to fill an internal buffer, blocking the connection's read loop. The blocked goroutine could not be released by calling Close(), resulting in a resource leak per connection. Unsolicited glob…
-
Medium 6.5
Invoking memory leak when rejecting channels can lead to DoS in golang.org/x/crypto/ssh
An authenticated SSH client that repeatedly opened channels which were rejected by the server caused unbounded memory growth, eventually crashing the server process and affecting all connected users. Rejected channels are now properly removed from the connect…
-
Critical 9.1
Invoking infinite loop on large channel writes in golang.org/x/crypto/ssh
When writing data larger than 4GB in a single Write call on an SSH channel, an integer overflow in the internal payload size calculation caused the write loop to spin indefinitely, sending empty packets without making progress. The size comparison now uses in…
-
Medium 5.3
Invoking server panic during CheckHostKey/Authenticate in golang.org/x/crypto/ssh
SSH servers which use CertChecker as a public key callback without setting IsUserAuthority or IsHostAuthority could be caused to panic by a client presenting a certificate. CertChecker now returns an error instead of panicking when these callbacks are nil.
-
High 7.5
Invoking byte arithmetic causes underflow and panic in golang.org/x/crypto/ssh
An incorrectly placed cast from bytes to int allowed for server-side panic in the AES-GCM packet decoder for well-crafted inputs.
-
Medium 5.3
OpenTelemetry-Go OTLP HTTP exporters read unbounded HTTP response bodies
OpenTelemetry-Go is the Go implementation of OpenTelemetry. Prior to 1.43.0, the otlp HTTP exporters (traces/metrics/logs) read the full HTTP response body into an in-memory bytes.Buffer without a size cap. This is exploitable for memory exhaustion when the c…
-
Medium 5.5
Unbounded allocation for old GNU sparse in archive/tar
tar.Reader can allocate an unbounded amount of memory when reading a maliciously-crafted archive containing a large number of sparse regions encoded in the "old GNU sparse map" format.