104 results · Feed
-
High 8.2
Pillow: Infinite loop in MIC n_frames when the embedded TIFF
Pillow is a Python imaging library. From 7.2.0 until 13.0.0, Pillow can enter an infinite loop while determining the frame count of a MIC image. MicImageFile inherits TIFF frame traversal, but MicImageFile.tell reports the OLE stream index and its seek() rese…
-
High 8.3
Pillow: Out-of-bounds read via attacker-controlled row stride on Pillow's mmap path (McIdas AREA files)
Pillow is a Python imaging library. Prior to 12.3.0, when Pillow loads an uncompressed McIdas AREA image from a filename through the mmap raw codec path, attacker-controlled header words can set a row stride smaller than the natural row width, causing pixel a…
-
High 8.2
Pillow: Heap out-of-bounds write in Pillow `ImageFilter.RankFilter` via integer overflow in `ImagingExpand`
Pillow is a Python imaging library. Prior to 12.3.0, Pillow's public rank-filter API can trigger a native heap out-of-bounds write when given a very large odd filter size because ImageFilter.RankFilter.filter() calls image.expand(size // 2, size // 2) before …
-
High 7.5
Pillow: Decompression Bomb DoS via PdfParser.PdfStream.decode()
Pillow is a Python imaging library. From 5.1.0 until 12.3.0, PdfParser.PdfStream.decode() in PIL/PdfParser.py calls zlib.decompress() with bufsize set to the PDF stream Length field without bounding the decompressed output size, allowing a crafted FlateDecode…
-
Medium 6.5
Pillow TGA RLE encoder can serialize up to ~57 KB of adjacent heap data into generated images
Pillow is a Python imaging library. From 5.2.0 until 12.3.0, Pillow's TGA RLE encoder reads past its packed row buffer when saving a mode 1 image with TGA RLE compression, allowing adjacent process heap bytes to be copied into the generated TGA file. This iss…
-
High 7.5
Pillow: Controlled heap out-of-bounds write in `ImageCmsTransform.apply()` via output mode mismatch
Pillow is a Python imaging library. Prior to 12.3.0, Pillow's ImageCms.ImageCmsTransform.apply(im, imOut) API can trigger controlled native heap corruption when the caller supplies an output image whose mode does not match the transform's declared output mode…
-
Medium 5.3
Pillow EpsImagePlugin negative %%BeginBinary byte count causes infinite loop denial of service
Pillow is a Python imaging library. From 12.0.0 through 12.2.0, Pillow's EPS parser in PIL/EpsImagePlugin.py accepts a negative byte count in the %%BeginBinary directive, allowing a crafted EPS file to cause Image.open() to seek backwards to the same directiv…
-
High 7.5
Pillow: Heap out-of-bounds write `Image.paste()` / `Image.crop()` via signed coordinate overflow
Pillow is a Python imaging library. Prior to 12.3.0, Pillow public image coordinate APIs can trigger a native heap out-of-bounds write when given coordinates near the signed 32-bit integer limits in Image.paste(), Image.crop(), or Image.alpha_composite(). Thi…
-
High 8.7
Pillow JPEG2000 tiled decode retains a growing scratch buffer and can be used for denial of service
Pillow is a Python imaging library. From 8.2.0 through 12.2.0, src/libImaging/Jpeg2KDecode.c accumulates total_component_width across every tile in a JPEG2000 image instead of recomputing it per tile, allowing a crafted tiled JPEG2000 file to force substantia…
-
High 7.5
Pillow BdfFontFile`: `Image.new()` called without `_decompression_bomb_check()` — bomb protection bypass via font loading
Pillow is a Python imaging library. Prior to 12.3.0, PIL/BdfFontFile.py bdf_char() read the BBX width and height field from a BDF font file and passed attacker-controlled dimensions to Image.new() without calling Image._decompression_bomb_check(), bypassing P…
-
High 7.5
Pillow GdImageFile decompression bomb protection bypass
Pillow is a Python imaging library. Prior to 12.3.0, PIL/GdImageFile.py GdImageFile._open() read image dimensions from the GD 2.x header and stored them in self._size without calling Image._decompression_bomb_check(), allowing a crafted .gd file to trigger ex…
-
High 7.5
Pillow: `FontFile.compile()`: `Image.new()` called without `_decompression_bomb_check()`
Pillow is a Python imaging library. Prior to 12.3.0, PIL/FontFile.py FontFile.compile() assembled per-glyph images into a combined bitmap with Image.new("1", (xsize, ysize)) without calling Image._decompression_bomb_check(), allowing a font to trigger excessi…
-
High 7.5
Pillow: PcfFontFile._load_bitmaps()`: `Image.frombytes()` called without `_decompression_bomb_check()` — bomb protection bypass via PCF font loading
Pillow is a Python imaging library. Prior to 12.3.0, PIL/PcfFontFile.py _load_bitmaps() read glyph dimensions from the PCF METRICS section and passed them directly to Image.frombytes() without calling Image._decompression_bomb_check(), allowing crafted PCF fo…
-
High 8.6
Pillow: OOB Write with Invalid PSD Tile Extents (Integer Overflow)
Pillow is a Python imaging library. From version 10.3.0 to before version 12.2.0, processing a malicious PSD file could lead to memory corruption, potentially resulting in a crash or arbitrary code execution. This issue has been patched in version 12.2.0.
-
Medium 5.1
Pillow: PDF Parsing Trailer Infinite Loop (DoS)
Pillow is a Python imaging library. From version 4.2.0 to before version 12.2.0, an attacker can supply a malicious PDF that causes the process to hang indefinitely, consuming 100% CPU and making the application unresponsive. This issue has been patched in ve…
-
Medium 5.1
Pillow: Integer overflow when processing fonts
Pillow is a Python imaging library. Prior to version 12.2.0, if a font advances for each glyph by an exceeding large amount, when Pillow keeps track of the current position, it may lead to an integer overflow. This issue has been patched in version 12.2.0.
-
Medium 5.1
Pillow: Heap buffer overflow with nested list coordinates
Pillow is a Python imaging library. From version 11.2.1 to before version 12.2.0, passing nested lists as coordinates to APIs that accept coordinates such as ImagePath.Path, ImageDraw.ImageDraw.polygon and ImageDraw.ImageDraw.line could cause a heap buffer ov…
-
High 8.7
Pillow is vulnerable to a FITS GZIP decompression bomb
Pillow is a Python imaging library. Versions 10.3.0 through 12.1.1 did not limit the amount of GZIP-compressed data read when decoding a FITS image, making them vulnerable to decompression bomb attacks. A specially crafted FITS file could cause unbounded memo…
-
High 8.6
Pillow has an out-of-bounds write when loading PSD images
Pillow is a Python imaging library. From 10.3.0 to before 12.1.1, an out-of-bounds write may be triggered when loading a specially crafted PSD image. This vulnerability is fixed in 12.1.1.
-
Medium 6.7
Pillow buffer overflow vulnerability
In _imagingcms.c in Pillow before 10.3.0, a buffer overflow exists because strcpy is used instead of strncpy.
-
High 8.1
Arbitrary Code Execution in Pillow
Pillow through 10.1.0 allows PIL.ImageMath.eval Arbitrary Code Execution via the environment parameter, a different vulnerability than CVE-2022-22817 (which was about the expression parameter).
-
High 7.5
Pillow Denial of Service vulnerability
An issue was discovered in Pillow before 10.0.0. It is a Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textleng…
-
High 7.5
Pillow vulnerable to Data Amplification attack.
Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).
-
Critical 9.1
Path traversal in Pillow
Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.
-
Medium 6.5
Out-of-bounds Read in Pillow
path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
-
Critical 9.8
Arbitrary expression injection in Pillow
PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A lambda expression could also be used.
-
Medium 6.5
Improper Initialization in Pillow
path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
-
High 7.5
Regular Expression Denial of Service (ReDoS)
The package pillow 5.2.0 and before 8.3.2 are vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
-
Critical 9.8
Buffer Overflow in Pillow
Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
-
High 7.5
Uncontrolled Resource Consumption in Pillow
An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a li…
-
Medium 5.5
Insufficient Verification of Data Authenticity in Pillow
An issue was discovered in Pillow before 8.2.0. For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
-
Critical 9.1
Pillow Out-of-bounds Read vulnerability
An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
-
Critical 9.1
Out-of-bounds Read in Pillow
An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
-
Medium 5.5
Pillow denial of service
An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.
-
High 7.5
Potential infinite loop in Pillow
An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
-
High 7.5
Out of bounds read in Pillow
An issue was discovered in Pillow before 8.1.1. There is an out-of-bounds read in SGIRleDecode.c.
-
Medium 6.5
Regular Expression Denial of Service (ReDoS) in Pillow
An issue was discovered in Pillow before 8.1.1. The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
-
High 7.5
Out of bounds read in Pillow
An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
-
High 7.5
Out-of-bounds Write in Pillow
An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
-
Critical 9.8
Out of bounds write in Pillow
An issue was discovered in Pillow before 8.1.1. TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2…