77 results · Feed
-
Medium 6.8CVE-2026-111943 Public exploit
Distrust compromised intermediate certificates in crypto/x509
On most platforms, Go uses the given system root certificates. However, in some narrower cases, the system trust stores may not be updated without further action. To defend against the narrower set of cases that may remain affected, a denylist was added in cr…
-
High 7.5
HTTP/2 server crash due to HPACK encoder race in net/http
HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part …
-
High 7.5
HTTP/2 transport accepts malformed framing-related headers in net/http
Historically, we have been rather lax about malformed framing-related headers in our HTTP/2 implementation, as they cannot interfere with HTTP/2 framing. However, this makes it possible for our HTTP/2 implementation to forward responses containing such header…
-
Critical 9.1
Double flow control refund on HTTP/2 server streams in net/http
The HTTP/2 server can refund connection-level flow control twice for the same data: Once when a client resets a stream (refunding data for any sent-but-unread portion of the stream), and again when a request handler reads the buffered data. A malicious client…
-
High 7.5
Excessive CPU consumption from repeated initial window changes in net/http
A malicious HTTP/2 peer can cause excessive CPU consumption in the client or server by opening a large number of streams and then sending many small SETTINGS frames containing SETTINGS_INITIAL_WINDOW_SIZE values.
-
High 7.5
HTTP/2 server memory exhaustion due to Trailer headers in net/http
When "Trailer" headers are sent by a client, the HTTP server internally uses the header values to populate the Request.Trailer map passed to the server handler. Because Request.Trailer is a map, each entry incurs memory overhead. For HTTP/2 servers, a malicio…
-
Low 2.0
OpenTelemetry-Go: Exporter config logging may leak endpoint URLs in info logs
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 1.5.0 to 1.44.0, sdk/trace.NewTracerProvider emits a TracerProvider created internal Info-level diagnostic event whose MarshalLog implementations recursively include span processor, expo…
-
High 8.7
gRPC-Go: Denial of Service (DoS) via crash due to missing `:authority` and `Host` headers in the xDS servers
gRPC-Go is the Go language implementation of gRPC. Prior to 1.82.2 and 1.83.2, servers created with xds.NewGRPCServer() allow internal/transport/http2_server.go to accept an RPC containing neither the :authority header nor the Host header, while RouteAndProce…
-
High 8.7
gRPC-Go: Heap Memory Exhaustion (OOM) via HTTP/2 DATA Frame Fragmentation
gRPC-Go is the Go language implementation of gRPC. Prior to 1.83.1, internal/transport/transport.go stores each fragmented HTTP/2 DATA frame as a separate recvMsg in recvBuffer, so millions of one-byte frames can consume disproportionate heap memory even when…
-
Medium 5.9
Avoid quadratic complexity in resolvePath in net/url
Previously, resolving relative paths containing parent directory ('..') segments performed string conversions and buffer rewrites on each step, resulting in quadratic time complexity and high memory allocation overhead. Now, path resolution operates on a byte…
-
High 7.5
Apply ReadHeaderTimeout when doing unencrypted HTTP/2 check in net/http
When a server is configured to support unencrypted HTTP/2, it reads a few bytes from each new connection to see if they contain the HTTP/2 client preface. ReadHeaderTimeout is unexpectedly not being applied when doing this.
-
High 7.5
Limit handshake messages we are willing to accept post-handshake in crypto/tls
Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key deriva…
-
Medium 6.1
Fix Javascript regexp context tracking in html/template
Previously, pathological inputs could close an unescaped '/' early, allowing for attack-controlled data to inject arbitrary content, potentially leading to XSS.
-
High 7.5
Add recursion depth guard during decode in encoding/xml
Previously, DecodeElement would reset the depth counter causing it to never fire; this could lead to stack exhaustion.
-
High 7.5
Enforce maximum recursion depth in encoding/asn1
Enforce a recursion limit in Unmarshal to prevent stack exhaustion when parsing deeply-nested, recursive structures.
-
High 7.5
Parsing an invalid SVCB or HTTPS RR can panic in golang.org/x/net/dns/dnsmessage
Parsing an invalid SVCB or HTTPS RR can panic when the size of a parameter value overflows the message buffer.
-
Medium 5.3
OpenTelemetry-Go's baggage parsing no longer caps raw header length
OpenTelemetry-Go is the Go implementation of OpenTelemetry. Versions 1.41.0 and 1.43.0 removed raw-length rejection and it causes `Parse` to process arbitrarily large/invalid baggage headers and log errors, enabling DoS via oversized inputs. Versions 1.42.0 a…
-
Medium 5.3
Arbitrary inputs are included in errors without any escaping in net/textproto
When returning errors, functions in the net/textproto package would include its input as part of the error. This might allow an attacker to inject misleading content to errors that are printed or logged.
-
High 7.5
Quadratic complexity in WordDecoder.DecodeHeader in mime
Decoding a maliciously-crafted MIME header containing many invalid encoded-words can consume excessive CPU.
-
Medium 6.5CVE-2026-27145 Public exploit
Inefficient candidate hostname parsing in crypto/x509
(*x509.Certificate).VerifyHostname previously called matchHostnames in a loop over all DNS Subject Alternative Name (SAN) entries. This caused strings.Split(host, ".") to execute repeatedly on the same input hostname. With a large DNS SAN list, verification c…
-
Critical 9.6
Invoking failure to reject ASCII-only Punycode-encoded labels in golang.org/x/net/idna
The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege …
-
High 7.5
Invoking pathological RSA/DSA parameters may cause DoS in golang.org/x/crypto/ssh
The RSA and DSA public key parsers did not enforce size limits on key parameters. A crafted public key with an excessively large modulus or DSA parameter could cause several minutes of CPU consumption during signature verification. This could be triggered by …
-
Critical 9.1
Invoking bypass of FIDO/U2F security keys physical interaction in golang.org/x/crypto/ssh
The Verify() method for FIDO/U2F security key types (sk-ecdsa-sha2-nistp256@openssh.com, sk-ssh-ed25519@openssh.com) did not check the User Presence flag. Signatures generated without physical touch were accepted, allowing unattended use of a hardware securit…
-
Critical 9.1
Invoking infinite loop on large channel writes in golang.org/x/crypto/ssh
When writing data larger than 4GB in a single Write call on an SSH channel, an integer overflow in the internal payload size calculation caused the write loop to spin indefinitely, sending empty packets without making progress. The size comparison now uses in…
-
High 7.5
Invoking byte arithmetic causes underflow and panic in golang.org/x/crypto/ssh
An incorrectly placed cast from bytes to int allowed for server-side panic in the AES-GCM packet decoder for well-crafted inputs.
-
High 7.5
Infinite loop in HTTP/2 transport when given bad SETTINGS_MAX_FRAME_SIZE in net/http/internal/http2 in golang.org/x/net
When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.
-
High 7.3CVE-2026-39883 Public exploit
OpenTelemetry-Go has an incomplete fix for CVE-2026-24051: BSD kenv command not using absolute path enables PATH hijacking
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.15.0 to 1.42.0, the fix for CVE-2026-24051 changed the Darwin ioreg command to use an absolute path but left the BSD kenv command using a bare name, allowing the same PATH hijacking attack on …
-
High 7.5
Go JOSE affect by a panic in JWE decryption
Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.4 and 3.0.5, decrypting a JS…
-
Critical 9.1CVE-2026-33186 Public exploit
gRPC-Go has an authorization bypass via missing leading slash in :path
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests …
-
High 7.0
Docker Desktop Docker Plugins Uncontrolled Search Path Element Local Privilege Escalation Vulnerability
Docker CLI for Windows searches for plugin binaries in C:\ProgramData\Docker\cli-plugins, a directory that does not exist by default. A low-privileged attacker can create this directory and place malicious CLI plugin binaries (docker-compose.exe, docker-build…
-
High 7.5
Sending certain HTTP/2 frames can cause a server to panic in golang.org/x/net
Due to missing nil check, sending 0x0a-0x0f HTTP/2 frames will cause a running server to panic
-
Low 2.9
Incorrect calculation in CIRCL secp384r1 CombinedMult
The CombinedMult function in the CIRCL ecc/p384 package (secp384r1 curve) produces an incorrect value for specific inputs. The issue is fixed by using complete addition formulas. ECDH and ECDSA signing relying on this curve are not affected. The bug was fixed…
-
Low 1.7
filippo.io/edwards25519 MultiScalarMult function produces invalid results or undefined behavior if receiver is not the identity
filippo.io/edwards25519 is a Go library implementing the edwards25519 elliptic curve with APIs for building cryptographic primitives. In versions 1.1.0 and earlier, MultiScalarMult produces invalid results or undefined behavior if the receiver is not the iden…
-
Medium 4.3
go-git improperly verifies data integrity values for .idx and .pack files
go-git is a highly extensible git implementation library written in pure Go. Prior to 5.16.5, a vulnerability was discovered in go-git whereby data integrity values for .pack and .idx files were not properly verified. This resulted in go-git potentially consu…
-
Critical 9.1
Unexpected session resumption in crypto/tls
During session resumption in crypto/tls, if the underlying Config has its ClientCAs or RootCAs fields mutated between the initial handshake and the resumed handshake, the resumed handshake may succeed when it should have failed. This may happen when a user ca…
-
High 8.6
Potential code smuggling via doc comments in cmd/cgo
A discrepancy between how Go and C/C++ comments were parsed allowed for code smuggling into the resulting cgo binary.
-
High 7.5
Memory exhaustion in query parameter parsing in net/url
The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encode…
-
Medium 6.5
Excessive CPU consumption when building archive index in archive/zip
archive/zip uses a super-linear file name indexing algorithm that is invoked the first time a file in an archive is opened. This can lead to a denial of service when consuming a maliciously constructed ZIP archive.
-
High 7.8
Arbitrary file write using cgo pkg-config directive in cmd/go
Building a malicious file with cmd/go can cause can cause a write to an attacker-controlled file with partial control of the file content. The "#cgo pkg-config:" directive in a Go source file provides command-line arguments to provide to the Go pkg-config com…
-
Medium 5.3
Handshake messages may be processed at the incorrect encryption level in crypto/tls
During the TLS 1.3 handshake if multiple messages are sent in records that span encryption level boundaries (for instance the Client Hello and Encrypted Extensions messages), the subsequent messages may be processed before the encryption level changes. This c…