34 results · Clear filters · Feed
-
High 7.5
HTTP/2 server crash due to HPACK encoder race in net/http
HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part …
-
High 7.5
HTTP/1 server connection desynchronization after 2xx CONNECT response in net/http
When an HTTP server handler sends a 2xx response to an HTTP/1 CONNECT request and returns without hijacking the connection, the server improperly continues to read and serve requests from the connection. Since a 2xx response to an HTTP/1 CONNECT converts the …
-
High 7.5
HTTP/2 transport accepts malformed framing-related headers in net/http
Historically, we have been rather lax about malformed framing-related headers in our HTTP/2 implementation, as they cannot interfere with HTTP/2 framing. However, this makes it possible for our HTTP/2 implementation to forward responses containing such header…
-
High 7.5
Excessive CPU consumption from repeated initial window changes in net/http
A malicious HTTP/2 peer can cause excessive CPU consumption in the client or server by opening a large number of streams and then sending many small SETTINGS frames containing SETTINGS_INITIAL_WINDOW_SIZE values.
-
High 7.5
Memory limit bypass when parsing MIME headers in net/textproto, mime/multipart
Parsing a multipart form can bypass memory limits and read an arbitrarily long line into memory when the remaining limit at the start of a part is less than 400 bytes.
-
High 7.5
Reject malformed ECH outer extension references in crypto/tls
Multiple ECH outer extension references are not permitted under RFC 9849; previously, a client could send a well-crafted packet that could trigger memory exhaustion in the server process by specifying multiple references. We now reject these as malformed and …
-
High 7.5
HTTP/1 client connection desynchronization after CONNECT rejection in net/http
When http.Transport sends an HTTP/1 CONNECT request with a non-empty Request.Body, it writes the body directly to the connection without framing after the request headers. If the server rejects the CONNECT request with a non-2xx keep-alive response, Transport…
-
High 7.5
HTTP/2 server memory exhaustion due to Trailer headers in net/http
When "Trailer" headers are sent by a client, the HTTP server internally uses the header values to populate the Request.Trailer map passed to the server handler. Because Request.Trailer is a map, each entry incurs memory overhead. For HTTP/2 servers, a malicio…
-
High 8.7
gRPC-Go: Denial of Service (DoS) via crash due to missing `:authority` and `Host` headers in the xDS servers
gRPC-Go is the Go language implementation of gRPC. Prior to 1.82.2 and 1.83.2, servers created with xds.NewGRPCServer() allow internal/transport/http2_server.go to accept an RPC containing neither the :authority header nor the Host header, while RouteAndProce…
-
High 8.7
gRPC-Go: Heap Memory Exhaustion (OOM) via HTTP/2 DATA Frame Fragmentation
gRPC-Go is the Go language implementation of gRPC. Prior to 1.83.1, internal/transport/transport.go stores each fragmented HTTP/2 DATA frame as a separate recvMsg in recvBuffer, so millions of one-byte frames can consume disproportionate heap memory even when…
-
High 7.5
Apply ReadHeaderTimeout when doing unencrypted HTTP/2 check in net/http
When a server is configured to support unencrypted HTTP/2, it reads a few bytes from each new connection to see if they contain the HTTP/2 client preface. ReadHeaderTimeout is unexpectedly not being applied when doing this.
-
High 7.5
Limit handshake messages we are willing to accept post-handshake in crypto/tls
Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key deriva…
-
High 7.5
Add recursion depth guard during decode in encoding/xml
Previously, DecodeElement would reset the depth counter causing it to never fire; this could lead to stack exhaustion.
-
High 7.5
Enforce maximum recursion depth in encoding/asn1
Enforce a recursion limit in Unmarshal to prevent stack exhaustion when parsing deeply-nested, recursive structures.
-
High 7.5CVE-2026-56852 Public exploit
Infinite loop on invalid input in golang.org/x/text
A norm.Iter can enter an infinite loop when handling input containing invalid UTF-8 bytes.
-
High 7.5
Infinite loop in HTTP/2 transport when given bad SETTINGS_MAX_FRAME_SIZE in net/http/internal/http2 in golang.org/x/net
When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.
-
High 7.3CVE-2026-39883 Public exploit
OpenTelemetry-Go has an incomplete fix for CVE-2026-24051: BSD kenv command not using absolute path enables PATH hijacking
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.15.0 to 1.42.0, the fix for CVE-2026-24051 changed the Darwin ioreg command to use an absolute path but left the BSD kenv command using a bare name, allowing the same PATH hijacking attack on …
-
High 7.5
Inefficient policy validation in crypto/x509
Validating certificate chains which use policies is unexpectedly inefficient when certificates in the chain contain a very large number of policy mappings, possibly causing denial of service. This only affects validation of otherwise trusted certificate chain…
-
High 7.5
Unexpected work during chain building in crypto/x509
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 an…
-
High 7.5
Unauthenticated TLS 1.3 KeyUpdate record can cause persistent connection retention and DoS in crypto/tls
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.
-
High 8.8
Code execution vulnerability in SWIG code generation in cmd/go
SWIG file names containing 'cgo' and well-crafted payloads could lead to code smuggling and arbitrary code execution at build time due to trust layer bypass.
-
High 7.5
Incorrect parsing of IPv6 host literals in net/url
url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.
-
High 8.6
Potential code smuggling via doc comments in cmd/cgo
A discrepancy between how Go and C/C++ comments were parsed allowed for code smuggling into the resulting cgo binary.
-
High 7.0
OpenTelemetry-Go Affected by Arbitrary Code Execution via PATH Hijacking
OpenTelemetry-Go is the Go implementation of OpenTelemetry. The OpenTelemetry Go SDK in version v1.20.0-1.39.0 is vulnerable to Path Hijacking (Untrusted Search Paths) on macOS/Darwin systems. The resource detection code in sdk/resource/host_id.go executes th…
-
High 7.5
Memory exhaustion in query parameter parsing in net/url
The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encode…
-
High 7.8
Arbitrary file write using cgo pkg-config directive in cmd/go
Building a malicious file with cmd/go can cause can cause a write to an attacker-controlled file with partial control of the file content. The "#cgo pkg-config:" directive in a Go source file provides command-line arguments to provide to the Go pkg-config com…
-
High 7.0
Unexpected code execution when invoking toolchain in cmd/go
Downloading and building modules with malicious version strings can cause local code execution. On systems with Mercurial (hg) installed, downloading modules from non-standard sources (e.g., custom domains) can cause unexpected code execution due to how exter…
-
High 7.5
Excessive resource consumption when printing error string for host certificate validation in crypto/x509
Within HostnameError.Error(), when constructing an error string, there is no limit to the number of hosts that will be printed out. Furthermore, the error string is constructed by repeated string concatenation, leading to quadratic runtime. Therefore, a certi…
-
High 7.5
Unexpected memory consumption during token parsing in golang.org/x/oauth2
An attacker can pass a malicious malformed token which causes unexpected memory to be consumed during parsing.
-
High 7.5
HTTP/2 CONTINUATION flood in net/http
An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames. Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a reques…
-
High 7.5
Infinite loop in JSON unmarshaling in google.golang.org/protobuf
The protojson.Unmarshal function can enter an infinite loop when unmarshaling certain forms of invalid JSON. This condition can occur when unmarshaling into a message which contains a google.protobuf.Any value, or when the UnmarshalOptions.DiscardUnknown opti…
-
High 7.5
Comments in display names are incorrectly handled in net/mail
The ParseAddressList function incorrectly handles comments (text within parentheses) within display names. Since this is a misalignment with conforming address parsers, it can result in different trust decisions being made by programs using different parsers.
-
High 7.5CVE-2023-47108 Public exploit
DoS vulnerability in otelgrpc (uncontrolled resource consumption) due to unbound cardinality metrics
OpenTelemetry-Go Contrib is a collection of third-party packages for OpenTelemetry-Go. Starting in version 0.37.0 and prior to version 0.46.0, the grpc Unary Server Interceptor out of the box adds labels `net.peer.sock.addr` and `net.peer.sock.port` that have…
-
High 7.5CVE-2023-39325 Public exploit
HTTP/2 rapid reset can cause excessive work in net/http
A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive server resource consumption. While the total number of requests is bounded by the http2.Server.MaxConcurrentStreams setting, resetting an in-progress requ…