55 results · Feed
-
Unscored —
HTTP/1 server crash due to MaxBytesReader header race in net/http
For HTTP/1 servers, when MaxBytesReader's limit is exceeded, "Connection: close" header is automatically set without synchronization, which might race with another header being set explicitly in the server handler. As a result, an HTTP/1 server that utilizes …
-
Medium 6.8CVE-2026-111943 Public exploit
Distrust compromised intermediate certificates in crypto/x509
On most platforms, Go uses the given system root certificates. However, in some narrower cases, the system trust stores may not be updated without further action. To defend against the narrower set of cases that may remain affected, a denylist was added in cr…
-
High 7.5
HTTP/2 server crash due to HPACK encoder race in net/http
HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part …
-
High 7.5
HTTP/2 transport accepts malformed framing-related headers in net/http
Historically, we have been rather lax about malformed framing-related headers in our HTTP/2 implementation, as they cannot interfere with HTTP/2 framing. However, this makes it possible for our HTTP/2 implementation to forward responses containing such header…
-
Critical 9.1
Double flow control refund on HTTP/2 server streams in net/http
The HTTP/2 server can refund connection-level flow control twice for the same data: Once when a client resets a stream (refunding data for any sent-but-unread portion of the stream), and again when a request handler reads the buffered data. A malicious client…
-
High 7.5
Excessive CPU consumption from repeated initial window changes in net/http
A malicious HTTP/2 peer can cause excessive CPU consumption in the client or server by opening a large number of streams and then sending many small SETTINGS frames containing SETTINGS_INITIAL_WINDOW_SIZE values.
-
High 7.5
HTTP/2 server memory exhaustion due to Trailer headers in net/http
When "Trailer" headers are sent by a client, the HTTP server internally uses the header values to populate the Request.Trailer map passed to the server handler. Because Request.Trailer is a map, each entry incurs memory overhead. For HTTP/2 servers, a malicio…
-
Low 2.0
OpenTelemetry-Go: Exporter config logging may leak endpoint URLs in info logs
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 1.5.0 to 1.44.0, sdk/trace.NewTracerProvider emits a TracerProvider created internal Info-level diagnostic event whose MarshalLog implementations recursively include span processor, expo…
-
High 8.7
gRPC-Go: Denial of Service (DoS) via crash due to missing `:authority` and `Host` headers in the xDS servers
gRPC-Go is the Go language implementation of gRPC. Prior to 1.82.2 and 1.83.2, servers created with xds.NewGRPCServer() allow internal/transport/http2_server.go to accept an RPC containing neither the :authority header nor the Host header, while RouteAndProce…
-
High 8.7
gRPC-Go: Heap Memory Exhaustion (OOM) via HTTP/2 DATA Frame Fragmentation
gRPC-Go is the Go language implementation of gRPC. Prior to 1.83.1, internal/transport/transport.go stores each fragmented HTTP/2 DATA frame as a separate recvMsg in recvBuffer, so millions of one-byte frames can consume disproportionate heap memory even when…
-
Medium 5.9
Avoid quadratic complexity in resolvePath in net/url
Previously, resolving relative paths containing parent directory ('..') segments performed string conversions and buffer rewrites on each step, resulting in quadratic time complexity and high memory allocation overhead. Now, path resolution operates on a byte…
-
High 7.5
Apply ReadHeaderTimeout when doing unencrypted HTTP/2 check in net/http
When a server is configured to support unencrypted HTTP/2, it reads a few bytes from each new connection to see if they contain the HTTP/2 client preface. ReadHeaderTimeout is unexpectedly not being applied when doing this.
-
High 7.5
Limit handshake messages we are willing to accept post-handshake in crypto/tls
Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key deriva…
-
Medium 6.1
Fix Javascript regexp context tracking in html/template
Previously, pathological inputs could close an unescaped '/' early, allowing for attack-controlled data to inject arbitrary content, potentially leading to XSS.
-
High 7.5
Add recursion depth guard during decode in encoding/xml
Previously, DecodeElement would reset the depth counter causing it to never fire; this could lead to stack exhaustion.
-
High 7.5
Enforce maximum recursion depth in encoding/asn1
Enforce a recursion limit in Unmarshal to prevent stack exhaustion when parsing deeply-nested, recursive structures.
-
Medium 5.3
Invoking Encrypted Client Hello privacy leak in crypto/tls
Handshakes which used Encrypted Client Hello could be de-anonymized by a passive network observer due to a disclosure of pre-shared key identities in the unencrypted client hello.
-
High 7.8
Root escape via symlink plus trailing slash in os
On Unix systems, opening a file in an os.Root improperly follows symlinks to locations outside of the Root when the final path component of the a path is a symbolic link and the path ends in /. For example, 'root.Open("symlink/")' will open "symlink" even whe…
-
Medium 5.3
OpenTelemetry-Go's baggage parsing no longer caps raw header length
OpenTelemetry-Go is the Go implementation of OpenTelemetry. Versions 1.41.0 and 1.43.0 removed raw-length rejection and it causes `Parse` to process arbitrarily large/invalid baggage headers and log errors, enabling DoS via oversized inputs. Versions 1.42.0 a…
-
Medium 5.3
Arbitrary inputs are included in errors without any escaping in net/textproto
When returning errors, functions in the net/textproto package would include its input as part of the error. This might allow an attacker to inject misleading content to errors that are printed or logged.
-
High 7.5
Quadratic complexity in WordDecoder.DecodeHeader in mime
Decoding a maliciously-crafted MIME header containing many invalid encoded-words can consume excessive CPU.
-
Medium 6.5CVE-2026-27145 Public exploit
Inefficient candidate hostname parsing in crypto/x509
(*x509.Certificate).VerifyHostname previously called matchHostnames in a loop over all DNS Subject Alternative Name (SAN) entries. This caused strings.Split(host, ".") to execute repeatedly on the same input hostname. With a large DNS SAN list, verification c…
-
Critical 9.6
Invoking failure to reject ASCII-only Punycode-encoded labels in golang.org/x/net/idna
The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege …
-
High 7.5
Infinite loop in HTTP/2 transport when given bad SETTINGS_MAX_FRAME_SIZE in net/http/internal/http2 in golang.org/x/net
When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.
-
High 7.3CVE-2026-39883 Public exploit
OpenTelemetry-Go has an incomplete fix for CVE-2026-24051: BSD kenv command not using absolute path enables PATH hijacking
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.15.0 to 1.42.0, the fix for CVE-2026-24051 changed the Darwin ioreg command to use an absolute path but left the BSD kenv command using a bare name, allowing the same PATH hijacking attack on …
-
High 8.8
Code execution vulnerability in SWIG code generation in cmd/go
SWIG file names containing 'cgo' and well-crafted payloads could lead to code smuggling and arbitrary code execution at build time due to trust layer bypass.
-
High 7.5
OpenTelemetry-Go multi-value `baggage` header extraction causes excessive allocations (remote dos amplification)
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.36.0 to 1.40.0, multi-value baggage: header extraction parses each header field-value independently and aggregates members across values. This allows an attacker to amplify cpu and allocations…
-
Critical 9.1CVE-2026-33186 Public exploit
gRPC-Go has an authorization bypass via missing leading slash in :path
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests …
-
High 8.6
Potential code smuggling via doc comments in cmd/cgo
A discrepancy between how Go and C/C++ comments were parsed allowed for code smuggling into the resulting cgo binary.
-
High 7.8
Arbitrary file write using cgo pkg-config directive in cmd/go
Building a malicious file with cmd/go can cause can cause a write to an attacker-controlled file with partial control of the file content. The "#cgo pkg-config:" directive in a Go source file provides command-line arguments to provide to the Go pkg-config com…
-
High 7.0
Unexpected code execution when invoking toolchain in cmd/go
Downloading and building modules with malicious version strings can cause local code execution. On systems with Mercurial (hg) installed, downloading modules from non-standard sources (e.g., custom domains) can cause unexpected code execution due to how exter…
-
High 7.0
Incorrect results returned from Rows.Scan in database/sql
Cancelling a query (e.g. by cancelling the context passed to one of the query methods) during a call to the Scan method of the returned Rows can result in unexpected results if other queries are being made in parallel. This can result in a race condition that…
-
Medium 6.8
Sensitive headers not cleared on cross-origin redirect in net/http
Proxy-Authorization and Proxy-Authenticate headers persisted on cross-origin redirects potentially leaking sensitive information.
-
High 7.5
Usage of ExtKeyUsageAny disables policy validation in crypto/x509
Calling Verify with a VerifyOptions.KeyUsages that contains ExtKeyUsageAny unintentionally disabledpolicy validation. This only affected certificate chains which contain policy graphs, which are rather uncommon.
-
Medium 6.5
Incorrect Neutralization of Input During Web Page Generation in x/net in golang.org/x/net
The tokenizer incorrectly interprets tags with unquoted attribute values that end with a solidus character (/) as self-closing. When directly using Tokenizer, this can result in such tags incorrectly being marked as self-closing, and when using the Parse func…
-
Critical 9.1
Request smuggling due to acceptance of invalid chunked data in net/http
The net/http package improperly accepts a bare LF as a line terminator in chunked data chunk-size lines. This can permit request smuggling if a net/http server is used in conjunction with a server that incorrectly accepts a bare LF as part of a chunk-ext.
-
Medium 4.4CVE-2025-22870 Public exploit
HTTP Proxy bypass using IPv6 Zone IDs in golang.org/x/net
Matching of hosts against proxy patterns can improperly treat an IPv6 zone ID as a hostname component. For example, when the NO_PROXY environment variable is set to "*.example.com", a request to "[::1%25.example.com]:80` will incorrectly match and not be prox…
-
High 7.5
Unexpected memory consumption during token parsing in golang.org/x/oauth2
An attacker can pass a malicious malformed token which causes unexpected memory to be consumed during parsing.
-
Medium 4.0
Timing sidechannel for P-256 on ppc64le in crypto/internal/nistec
Due to the usage of a variable time instruction in the assembly implementation of an internal function, a small number of bits of secret scalars are leaked on the ppc64le architecture. Due to the way this function is used, we do not believe this leakage is en…
-
Medium 6.1
Sensitive headers incorrectly sent after cross-domain redirect in net/http
The HTTP client drops sensitive headers after following a cross-domain redirect. For example, a request to a.com/ containing an Authorization header which is redirected to b.com/ will not send that header to b.com. In the event that the client received a subs…