80 results · Feed
-
High 8.7
compress zstd: Panic on two-block frames
compress provides various compression algorithms. Prior to 1.20.2, the zstd DecodeAll and streaming decoder paths can panic when a crafted two-block frame reaches huff0.ReadTable with an FSE normalized count of 32768 that readNCount stores in int16 as -32768.…
-
High 7.5
HTTP/2 server crash due to HPACK encoder race in net/http
HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part …
-
High 7.5
HTTP/2 transport accepts malformed framing-related headers in net/http
Historically, we have been rather lax about malformed framing-related headers in our HTTP/2 implementation, as they cannot interfere with HTTP/2 framing. However, this makes it possible for our HTTP/2 implementation to forward responses containing such header…
-
Critical 9.1
Double flow control refund on HTTP/2 server streams in net/http
The HTTP/2 server can refund connection-level flow control twice for the same data: Once when a client resets a stream (refunding data for any sent-but-unread portion of the stream), and again when a request handler reads the buffered data. A malicious client…
-
High 7.5
Excessive CPU consumption from repeated initial window changes in net/http
A malicious HTTP/2 peer can cause excessive CPU consumption in the client or server by opening a large number of streams and then sending many small SETTINGS frames containing SETTINGS_INITIAL_WINDOW_SIZE values.
-
High 7.5
HTTP/2 server memory exhaustion due to Trailer headers in net/http
When "Trailer" headers are sent by a client, the HTTP server internally uses the header values to populate the Request.Trailer map passed to the server handler. Because Request.Trailer is a map, each entry incurs memory overhead. For HTTP/2 servers, a malicio…
-
Low 2.0
OpenTelemetry-Go: Exporter config logging may leak endpoint URLs in info logs
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 1.5.0 to 1.44.0, sdk/trace.NewTracerProvider emits a TracerProvider created internal Info-level diagnostic event whose MarshalLog implementations recursively include span processor, expo…
-
High 7.5
Prevent DoS on deadlocked established channel in golang.org/x/crypto/ssh
Previously, after a channel has been established, a malicious peer could send crafted messages that would deadlock the entire connection. Now, we handle all RFC 4254 channel messages; global requests are handled explicitly. Then, treat all other messages as a…
-
High 7.5
Prevent DoS on deadlocked undecided channel in golang.org/x/crypto/ssh
Previously, a channel registered in the mux's chanList is not usable until it is established. A malicious peer was able flood the channel's incomingRequests, deadlocking the entire connection. Now, we add an atomic established state, set when a channel become…
-
Medium 5.9
Avoid quadratic complexity in resolvePath in net/url
Previously, resolving relative paths containing parent directory ('..') segments performed string conversions and buffer rewrites on each step, resulting in quadratic time complexity and high memory allocation overhead. Now, path resolution operates on a byte…
-
High 7.5
Apply ReadHeaderTimeout when doing unencrypted HTTP/2 check in net/http
When a server is configured to support unencrypted HTTP/2, it reads a few bytes from each new connection to see if they contain the HTTP/2 client preface. ReadHeaderTimeout is unexpectedly not being applied when doing this.
-
High 7.5
Limit handshake messages we are willing to accept post-handshake in crypto/tls
Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key deriva…
-
Medium 6.1
Fix Javascript regexp context tracking in html/template
Previously, pathological inputs could close an unescaped '/' early, allowing for attack-controlled data to inject arbitrary content, potentially leading to XSS.
-
High 7.5
Add recursion depth guard during decode in encoding/xml
Previously, DecodeElement would reset the depth counter causing it to never fire; this could lead to stack exhaustion.
-
High 7.5
Enforce maximum recursion depth in encoding/asn1
Enforce a recursion limit in Unmarshal to prevent stack exhaustion when parsing deeply-nested, recursive structures.
-
Medium 6.3CVE-2026-71557 Public exploit
go-git: Malicious reference names may modify files outside the reference storage
go-git is an extensible git implementation library written in pure Go. Prior to 5.19.2 and 6.0.0-alpha.5, reference names are not sanitized before being used to construct on-disk paths under the reference storage directory, so a maliciously crafted reference …
-
High 7.1
go-git: Worktree operations may follow symlinks
go-git is an extensible git implementation library written in pure Go. Prior to 5.19.2 and 6.0.0-alpha.5, worktree operations (including checkout, status, and add) resolve symbolic links inside the working tree without confining resolution to the worktree bou…
-
High 7.5
Parsing an invalid SVCB or HTTPS RR can panic in golang.org/x/net/dns/dnsmessage
Parsing an invalid SVCB or HTTPS RR can panic when the size of a parameter value overflows the message buffer.
-
High 7.5
oras-go: credential forwarding via unvalidated Location header in blob upload
oras-go is a Go library for managing OCI artifacts. Prior to 2.6.1, registry/remote/repository.go in blobStore.completePushAfterInitialPost follows a registry-controlled Location header during monolithic blob upload and reuses the Authorization header from th…
-
Medium 6.9
oras-go: file store write outside workingDir via symlink traversal
oras-go is a Go library for managing OCI artifacts. Prior to 2.6.1, resolveWritePath() in content/file/file.go uses a lexical filepath.Rel check for workingDir and does not account for symlink traversal, so when AllowPathTraversalOnWrite=false an attacker-con…
-
High 7.1
oras-go: Hardlink entry with relative Linkname escapes extract dir via process CWD resolution in `oras-go` tar extraction
oras-go is a Go library for managing OCI artifacts. Prior to 2.6.2, ensureLinkPath in content/file/utils.go:262-275 validates a hardlink target relative to the extract base but returns the unresolved target, causing os.Link("victim.secret", "<extract_base>/pa…
-
Low 2.1
oras-go: Malicious registry can hijack Bearer token realm to exfiltrate credentials and refresh tokens
oras-go is a Go library for managing OCI artifacts. Prior to 2.6.1, auth.Client follows the realm URL from a registry's WWW-Authenticate: Bearer challenge without validating the scheme or host, allowing a malicious or compromised registry to cause SSRF to int…
-
Medium 5.3
Invoking Encrypted Client Hello privacy leak in crypto/tls
Handshakes which used Encrypted Client Hello could be de-anonymized by a passive network observer due to a disclosure of pre-shared key identities in the unencrypted client hello.
-
Medium 5.3
OpenTelemetry-Go's baggage parsing no longer caps raw header length
OpenTelemetry-Go is the Go implementation of OpenTelemetry. Versions 1.41.0 and 1.43.0 removed raw-length rejection and it causes `Parse` to process arbitrarily large/invalid baggage headers and log errors, enabling DoS via oversized inputs. Versions 1.42.0 a…
-
Medium 5.3
Arbitrary inputs are included in errors without any escaping in net/textproto
When returning errors, functions in the net/textproto package would include its input as part of the error. This might allow an attacker to inject misleading content to errors that are printed or logged.
-
High 7.5
Quadratic complexity in WordDecoder.DecodeHeader in mime
Decoding a maliciously-crafted MIME header containing many invalid encoded-words can consume excessive CPU.
-
Medium 6.5CVE-2026-27145 Public exploit
Inefficient candidate hostname parsing in crypto/x509
(*x509.Certificate).VerifyHostname previously called matchHostnames in a loop over all DNS Subject Alternative Name (SAN) entries. This caused strings.Split(host, ".") to execute repeatedly on the same input hostname. With a large DNS SAN list, verification c…
-
Medium 6.5
go-billy: Lack of depth and cycle detection in symlink resolution may lead to infinite loops and resource exhaustion
Billy is an interface filesystem abstraction for Go. Prior to versions 5.9.0 and 6.0.0-alpha.1, multiple components may improperly handle crafted or malformed input, resulting in panics, infinite loops, uncontrolled recursion, or excessive resource consumptio…
-
High 8.1
Billy: Path traversal vulnerabilities
Billy is an interface filesystem abstraction for Go. Prior to 5.9.0, multiple path traversal issues exist across different components of go-billy. Insufficient path sanitization and boundary enforcement may allow crafted paths (e.g., using ..) to escape inten…
-
Low 2.3
go-git: Improper single-quote escaping in go-git SSH transport
go-git is an extensible git implementation library written in pure Go. Prior to 5.19.1 and 6.0.0-alpha.4, go-git's SSH transport constructs the remote exec command by wrapping the repository path in single quotes without escaping single quotes embedded inside…
-
Medium 5.4
go-git: Crafted repositories may modify main and submodule .git directories
go-git is an extensible git implementation library written in pure Go. Prior to 5.19.1 and 6.0.0-alpha.4, a path validation issue in go-git could allow crafted repository data to affect files outside the intended checkout target, including the repository's .g…
-
High 7.0
go-git: Improper parsing of specially crafted objects may lead to inconsistent interpretation compared to upstream Git
go-git is an extensible git implementation library written in pure Go. Prior to 5.19.0 and 6.0.0-alpha.3, go-git may parse malformed Git objects in a way that differs from upstream Git. When commit or tag objects contain ambiguous or malformed headers, go-git…
-
Critical 9.6
Invoking failure to reject ASCII-only Punycode-encoded labels in golang.org/x/net/idna
The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege …
-
Medium 4.7
go-git Credential leak via cross-host redirect in smart HTTP transport
go-git is an extensible git implementation library written in pure Go. Prior to versions 5.18.0 and 6.0.0-alpha.2, go-git may leak HTTP authentication credentials when following redirects during smart-HTTP clone and fetch operations. This issue has been patch…
-
High 7.5
Infinite loop in HTTP/2 transport when given bad SETTINGS_MAX_FRAME_SIZE in net/http/internal/http2 in golang.org/x/net
When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.
-
High 8.7
SpdyStream: DOS on CRI
spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTING…
-
Medium 4.8
Helm Chart extraction output directory collapse via `Chart.yaml` name dot-segment
Helm is a package manager for Charts for Kubernetes. In Helm versions <=3.20.1 and <=4.1.3, a specially crafted Chart will cause helm pull --untar [chart URL | repo/chartname] to write the Chart's contents to the immediate output directory (as defaulted to th…
-
High 8.4
Helm's plugin verification fails open when .prov is missing, allowing unsigned plugin install
Helm is a package manager for Charts for Kubernetes. From 4.0.0 to 4.1.3, Helm will install plugins missing provenance (.prov file) when signature verification is required. This vulnerability is fixed in 4.1.4.
-
High 8.4CVE-2026-35204 Public exploit
Helm has a path traversal in plugin metadata version enables arbitrary file write outside Helm plugin directory
Helm is a package manager for Charts for Kubernetes. From 4.0.0 to 4.1.3, a specially crafted Helm plugin, when installed or updated, will cause Helm to write the contents of the plugin to an arbitrary filesystem location. To prevent this, validate that the p…
-
High 7.3CVE-2026-39883 Public exploit
OpenTelemetry-Go has an incomplete fix for CVE-2026-24051: BSD kenv command not using absolute path enables PATH hijacking
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.15.0 to 1.42.0, the fix for CVE-2026-24051 changed the Darwin ioreg command to use an absolute path but left the BSD kenv command using a bare name, allowing the same PATH hijacking attack on …