114 results · Feed
-
High 7.5
Specific RPZ configurations and query patterns may result in an unexpected exit
A recursive BIND server that receives a query with recursion desired (RD=1) followed by a non-recursive query (RD=0) may exit with an assertion failure, resulting in a denial of service. To be vulnerable, the BIND server must allow recursive queries and have …
-
High 7.5
Named may terminate unexpectedly when a redirect zone is used with strict QNAME minimization
A BIND resolver that is configured with both a "redirect" zone and "qname-minimization strict" may abort with an assertion failure while processing the redirect. This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through…
-
High 8.1CVE-2026-94300 Public exploit
Concurrent GSS-TSIG messages corrupt memory
Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker…
-
High 7.5
Amplified resource exhaustion in inbound message processing
In a BIND resolver, inbound DNS protocol messages with a particular structure will result in additional processing, with no limit imposed by BIND. A DNS message with a maliciously large number of such structures will cause BIND to consume disproportionate amo…
-
Medium 5.9
NSEC3 insecure-referral proof can use unrelated cached NSEC3 RRsets
A validly signed NSEC3 from an unrelated sibling zone may be accepted as an insecurity proof, downgrading a secure delegation and letting a forged unsigned answer through. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21…
-
Medium 5.3
Message parser retains every identical singleton RDATA, enabling wire-to-work amplification
In a query response, an attacker may send `named` multiple copies of a record that should only exist once (such as an SOA record). If the RDATA is the same on all the copies, the record is appended to the in-memory RDATA set, which can cause increased memory …
-
Medium 5.3
Resource Exhaustion via Excessive DNSSEC Cryptographic Material Matching
A BIND recursive resolver may experience excessive resource consumption if it encounters large numbers of a particular kind of invalid DNSSEC record. Default limits on "max-records-per-type" and "max-types-per-name" help mitigate the exposure. This issue affe…
-
Medium 6.5
Unauthenticated IXFR deltas are applied to the live zone before TSIG verification
For a secondary zone with transfers restricted by TSIG, `named` may start to serve the data provided in a zone transfer before the final message with the TSIG signature arrives. This could allow an attacker that does not actually possess a valid TSIG signatur…
-
High 7.5
Validating resolver can abort while caching a mismatched NOQNAME proof
If a BIND resolver sends a query for a DNSSEC-signed authoritative zone, and the authoritative server replies with a valid wildcard answer and signed NSEC3 proof, followed by an unsigned NSEC at the same owner name, it will trigger an unexpected program exit.…
-
High 7.5
named aborts on a TKEY query when the user configuration has no global options statement
If BIND is loaded with a "`named.conf`" file that contains no global "`options`" block, an attacker can send a query of QTYPE TKEY which may cause an assertion failure and subsequent unexpected program exit. This issue affects BIND 9 versions 9.20.0 through 9…
-
High 7.5
Use-after-free in query_addnoqnameproof() via the DNS64 filter64 path
On a resolver configured to use ``dns64``, if an applicable answer from the authoritative server is malformed in a specific way, the resolver `named` process will exit unexpectedly. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.2…
-
High 7.5
SVCB AliasMode additional-data error leaks qpcache references
A BIND resolver encountering an SVCB/HTTPS AliasMode record referencing 14 or more SVCB/HTTPS ServiceMode records may fail to properly deallocate internal resources. If this happens repeatedly, resource exhaustion will eventually prevent the resolver from per…
-
Medium 5.8
Out-of-zone database nodes can become authoritative zone cuts
A malformed zone may contain an NS or DNAME node above its origin, which `named` treats as a zone cut. If an attacker inserts a malformed zone into a BIND authoritative server (e.g., via zone transfer), queries for names inside the configured zone then lose a…
-
High 7.5
Unauthenticated remote crash of named via a single DoH SIG(0) request
An attacker can cause `named` to abort by sending a crafted DNS-over-HTTPS request with a cryptographically invalid SIG(0) record, and then closing the transport connection prematurely. This issue affects BIND 9 versions 9.20.0 through 9.20.27, 9.21.0 through…
-
Medium 5.9
checkwildcard() accepts an out-of-zone NSEC as a wildcard-nonexistence proof
An inapplicable NSEC record may be accepted by a `named` resolver as proof that no wildcard exists, which could allow an attacker at the same or an upstream level of the zone name to mask the existence of a victim's wildcard record. This issue affects BIND 9 …
-
Medium 5.9
qpcache NOQNAME proof use-after-free crashes recursive resolver
An attacker may be able to cause a `named` resolver to abort. The attack requires inducing the victim resolver to send multiple queries for a DNSSEC-signed zone hosted by an authoritative server under the control of the attacker. If the auth responds with a p…
-
High 7.5
Remote assertion failure via 16-bit length truncation in `dns_ncache_add()`
If an attacker-controlled authoritative server can produce a negative answer that is exactly 65536 bytes, then a flaw in `named` results in a negative cache entry of 0 bytes. When this entry is subsequently read, `named` aborts. This issue affects BIND 9 vers…
-
High 7.5
Remote CPU denial of service through cached SVCB/HTTPS AliasMode trees
If a BIND resolver has cached a tree of SVCB/HTTPS AliasMode records, and is then queried for the root of that tree, the resolver will spend disproportionate CPU time constructing the response. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0…
-
High 8.6
DNSSEC Validation Bypass via Out-of-Zone NSEC Next Field
The BIND resolver accepts validly-signed NSEC records where the "Next Domain Name" field points outside the signer's zone. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1,…
-
High 7.5
Unexpected exit in certain situations with NSEC and NSEC3 both present
If a provably insecure domain is covered by both an NSEC and NSEC3 record at the parent, and there exist an RRSIG for only one of these types, then BIND may exit unexpectedly with an assertion while validating this proof. This issue affects BIND 9 versions 9.…
-
High 7.5
Record ordering based unexpected exit with CNAME or DNAME
The issue is unexpected program termination based on ordering and/or specific content in responses to queries for CNAME or DNAME, and A records. Specifically, if a client queries for a DNAME and A record below the DNAME to the resolver, and the authoritative …
-
High 7.5
Cache poisoning possible with label count discrepancy, RRSIG, and wildcards
It is possible for an attacker's zone to respond to a query with an RRSIG that has a smaller number of labels than the zone in which the RRSIG is contained. This causes `named` to produce a wildcard name for a zone that is shorter than the attacker's zone, wh…
-
High 7.5
Potential memory usage beyond configured limits
A DNSSEC validating resolver that is under a random subdomain attack against a DNSSEC-signed zone can suffer from runaway memory usage. The attacker needs to be able to send queries faster than the resolver can perform validation. The increased memory usage c…
-
High 7.5
Unnecessary validation of DNSSEC signed records
The issue is a resource exhaustion vulnerability associated with DNSSEC validation. BIND always validates all RRSIG records in an answer, even if they are not strictly needed. A query to an authoritative server/zone which returns many valid but superfluous RR…
-
High 7.5
Potential wildcard CNAME RPZ policy bypass
An attacker who knows (or guesses) that a resolver uses RPZ with wildcard CNAME policies can craft query names long enough to trigger a NAMETOOLONG error condition during RPZ processing. This is not handled correctly and may lead to defeating the RPZ rule. It…
-
Medium 6.5
Key Record using PRIVATEDNS algorithm may lead to unexpected exit
If BIND encounters a particular invalid data structure in a DNS record, it will accept the invalid data, and may subsequently abort and exit. BIND will first need to store a DNS record for a key (KEY, DNSKEY, etc.). That key must specify a PRIVATEDNS algorith…
-
Medium 6.8
Incorrect acceptance of NSEC3 records
BIND may accept incorrect child-zone NSEC3 records as valid, which could allow an attacker to forge authenticated NXDOMAIN responses. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through …
-
Medium 5.3CVE-2026-5950 Public exploit
Unbounded resend loop in BIND 9 resolver
An unbounded resend loop vulnerability exists in the BIND 9 resolver state machine during bad-server handling, enabling a remote unauthenticated attacker to cause severe resource exhaustion by sending queries that trigger specific retry conditions. This issue…
-
High 7.5
SIG(0) validation during query flood may lead to undefined behavior
Undefined behavior may result due to a race condition leading to a use-after-free violation. If BIND receives an incoming DNS message signed with SIG(0), it begins work to validate that signature. If, during that validation, the "recursive-clients" limit is r…
-
High 7.5
Invalid handling of CLASS != IN
Multiple flaws have been identified in `named` related to the handling of DNS messages whose CLASS is not Internet (`IN`) — for example, `CHAOS` or `HESIOD`, or DNS messages that specify meta-classes (`ANY` or `NONE`) in the question section. Specially crafte…
-
High 7.4
Heap use-after-free vulnerability in BIND 9 DNS-over-HTTPS implementation
A use-after-free vulnerability exists within the DNS-over-HTTPS implementation. This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1. BIND 9 versions 9.18.0 through 9.18.48 and 9.18.11-S1 through …
-
Medium 5.3
Amplification vulnerabilities via self-pointed glue records
BIND resolvers are vulnerable to an amplified resource consumption/exhaustion attack. If a victim resolver makes a query to a specially crafted zone, the resolver will consume disproportionate resources. This issue affects BIND 9 versions 9.11.0 through 9.16.…
-
High 7.5
BIND 9 server memory exhaustion during GSS-API TKEY negotiation
BIND servers that are configured to use TKEY-based authentication via GSS-API tokens are vulnerable to excessive memory consumption when receiving and processing maliciously-constructed packets. Typically these servers will be found in Active Directory integr…
-
Medium 5.4
A stack use-after-return flaw in SIG(0) handling code may enable ACL bypass
A use-after-return vulnerability exists in the `named` server when handling DNS queries signed with SIG(0). Using a specially-crafted DNS request, an attacker may be able to cause an ACL to improperly (mis)match an IP address. In a default-allow ACL (denying …
-
Medium 6.5
Authenticated query containing a TKEY record may cause named to terminate unexpectedly
Under certain conditions, `named` may crash when processing a correctly signed query containing a TKEY record. The affected code can only be reached if an incoming request has a valid transaction signature (TSIG) from a key declared in the `named` configurati…
-
High 7.5
Memory leak in code preparing DNSSEC proofs of non-existence
A specially crafted domain can be used to cause a memory leak in a BIND resolver simply by querying this domain. This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1. BIND 9 versions 9.18.0 throug…
-
High 7.5
Excessive NSEC3 iterations cause high CPU load during insecure delegation validation
If a BIND resolver is performing DNSSEC validation and encounters a maliciously crafted zone, the resolver may consume excessive CPU. Authoritative-only servers are generally unaffected, although there are circumstances where authoritative servers may make re…
-
High 7.5
Malformed BRID/HHIT records can cause named to terminate unexpectedly
Malformed BRID/HHIT records can cause `named` to terminate unexpectedly. This issue affects BIND 9 versions 9.18.40 through 9.18.43, 9.20.13 through 9.20.17, 9.21.12 through 9.21.16, 9.18.40-S1 through 9.18.43-S1, and 9.20.13-S1 through 9.20.17-S1.
-
High 8.6
Cache poisoning due to weak PRNG
In specific circumstances, due to a weakness in the Pseudo Random Number Generator (PRNG) that is used, it is possible for an attacker to predict the source port and query ID that BIND will use. This issue affects BIND 9 versions 9.16.0 through 9.16.50, 9.18.…
-
High 8.6CVE-2025-40778 Public exploit
Cache poisoning attacks with unsolicited RRs
Under certain circumstances, BIND is too lenient when accepting records from answers, allowing an attacker to inject forged data into the cache. This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 …