57 results · Feed
-
High 8.7
compress zstd: Panic on two-block frames
compress provides various compression algorithms. Prior to 1.20.2, the zstd DecodeAll and streaming decoder paths can panic when a crafted two-block frame reaches huff0.ReadTable with an FSE normalized count of 32768 that readNCount stores in int16 as -32768.…
-
High 7.5
Go JOSE: DoS when parsing JWKs that contain RSA keys
Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.6, go-jose parses attacker-c…
-
High 7.5
HTTP/2 server crash due to HPACK encoder race in net/http
HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part …
-
High 7.5
HTTP/2 transport accepts malformed framing-related headers in net/http
Historically, we have been rather lax about malformed framing-related headers in our HTTP/2 implementation, as they cannot interfere with HTTP/2 framing. However, this makes it possible for our HTTP/2 implementation to forward responses containing such header…
-
Critical 9.1
Double flow control refund on HTTP/2 server streams in net/http
The HTTP/2 server can refund connection-level flow control twice for the same data: Once when a client resets a stream (refunding data for any sent-but-unread portion of the stream), and again when a request handler reads the buffered data. A malicious client…
-
High 7.5
Excessive CPU consumption from repeated initial window changes in net/http
A malicious HTTP/2 peer can cause excessive CPU consumption in the client or server by opening a large number of streams and then sending many small SETTINGS frames containing SETTINGS_INITIAL_WINDOW_SIZE values.
-
High 7.5
HTTP/2 server memory exhaustion due to Trailer headers in net/http
When "Trailer" headers are sent by a client, the HTTP server internally uses the header values to populate the Request.Trailer map passed to the server handler. Because Request.Trailer is a map, each entry incurs memory overhead. For HTTP/2 servers, a malicio…
-
Low 2.0
OpenTelemetry-Go: Exporter config logging may leak endpoint URLs in info logs
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 1.5.0 to 1.44.0, sdk/trace.NewTracerProvider emits a TracerProvider created internal Info-level diagnostic event whose MarshalLog implementations recursively include span processor, expo…
-
High 8.7
gRPC-Go: Denial of Service (DoS) via crash due to missing `:authority` and `Host` headers in the xDS servers
gRPC-Go is the Go language implementation of gRPC. Prior to 1.82.2 and 1.83.2, servers created with xds.NewGRPCServer() allow internal/transport/http2_server.go to accept an RPC containing neither the :authority header nor the Host header, while RouteAndProce…
-
High 8.7
gRPC-Go: Heap Memory Exhaustion (OOM) via HTTP/2 DATA Frame Fragmentation
gRPC-Go is the Go language implementation of gRPC. Prior to 1.83.1, internal/transport/transport.go stores each fragmented HTTP/2 DATA frame as a separate recvMsg in recvBuffer, so millions of one-byte frames can consume disproportionate heap memory even when…
-
Medium 5.9
Avoid quadratic complexity in resolvePath in net/url
Previously, resolving relative paths containing parent directory ('..') segments performed string conversions and buffer rewrites on each step, resulting in quadratic time complexity and high memory allocation overhead. Now, path resolution operates on a byte…
-
High 7.5
Apply ReadHeaderTimeout when doing unencrypted HTTP/2 check in net/http
When a server is configured to support unencrypted HTTP/2, it reads a few bytes from each new connection to see if they contain the HTTP/2 client preface. ReadHeaderTimeout is unexpectedly not being applied when doing this.
-
High 7.5
Limit handshake messages we are willing to accept post-handshake in crypto/tls
Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key deriva…
-
Medium 6.1
Fix Javascript regexp context tracking in html/template
Previously, pathological inputs could close an unescaped '/' early, allowing for attack-controlled data to inject arbitrary content, potentially leading to XSS.
-
High 7.5
Add recursion depth guard during decode in encoding/xml
Previously, DecodeElement would reset the depth counter causing it to never fire; this could lead to stack exhaustion.
-
High 7.5
Enforce maximum recursion depth in encoding/asn1
Enforce a recursion limit in Unmarshal to prevent stack exhaustion when parsing deeply-nested, recursive structures.
-
High 7.5CVE-2026-56852 Public exploit
Infinite loop on invalid input in golang.org/x/text
A norm.Iter can enter an infinite loop when handling input containing invalid UTF-8 bytes.
-
Critical 9.6
Invoking failure to reject ASCII-only Punycode-encoded labels in golang.org/x/net/idna
The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege …
-
High 7.5
Crash when handling long CNAME response in net
When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash.
-
Medium 6.1
Escaper bypass leads to XSS in html/template
If a trusted template author were to write a <script> tag containing an empty 'type' attribute or a 'type' attribute with an ASCII whitespace, the execution of the template would incorrectly escape any data passed into the <script> block.
-
Medium 6.1
Bypass of meta content URL escaping causes XSS in html/template
CVE-2026-27142 fixed a vulnerability in which URLs were not correctly escaped inside of a <meta> tag's <content> attribute. If the URL content were to insert ASCII whitespaces around the '=' rune inside of the <content> attribute, the escaper would fail to si…
-
High 7.5
Malicious module proxy can bypass checksum database in cmd/go
A malicious module proxy can exploit a flaw in the go command's validation of module checksums to bypass checksum database validation. This vulnerability affects any user using an untrusted module proxy (GOMODPROXY) or checksum database (GOSUMDB). A malicious…
-
Medium 5.9
Invoking "go tool pack" does not sanitize output paths in cmd/go
The "go tool pack" subcommand (usually used only by the compiler as an internal tool with known-good inputs) does not sanitize output filenames. Extracting a malicious archive file with the "pack" subcommand can write files to arbitrary locations on the files…
-
Medium 5.3
Invoking "go bug" follows symlinks in predictable temporary filenames in cmd/go
The "go bug" command writes to two files with predictable names in the system temporary directory (for example, "/tmp"). An attacker with access to the temporary directory can create a symlink in one of these names, causing "go bug" to overwrite the target of…
-
High 7.5
Panic in Dial and LookupPort when handling NUL byte on Windows in net
The Dial and LookupPort functions panic on Windows when provided with an input containing a NUL (0).
-
High 7.5
Infinite loop in HTTP/2 transport when given bad SETTINGS_MAX_FRAME_SIZE in net/http/internal/http2 in golang.org/x/net
When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.
-
High 7.3CVE-2026-39883 Public exploit
OpenTelemetry-Go has an incomplete fix for CVE-2026-24051: BSD kenv command not using absolute path enables PATH hijacking
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.15.0 to 1.42.0, the fix for CVE-2026-24051 changed the Darwin ioreg command to use an absolute path but left the BSD kenv command using a bare name, allowing the same PATH hijacking attack on …
-
High 7.5
Inefficient policy validation in crypto/x509
Validating certificate chains which use policies is unexpectedly inefficient when certificates in the chain contain a very large number of policy mappings, possibly causing denial of service. This only affects validation of otherwise trusted certificate chain…
-
High 7.5
Unexpected work during chain building in crypto/x509
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 an…
-
High 7.5
Unauthenticated TLS 1.3 KeyUpdate record can cause persistent connection retention and DoS in crypto/tls
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.
-
High 8.8
Code execution vulnerability in SWIG code generation in cmd/go
SWIG file names containing 'cgo' and well-crafted payloads could lead to code smuggling and arbitrary code execution at build time due to trust layer bypass.
-
Medium 6.1
JsBraceDepth Context Tracking Bugs (XSS) in html/template
Context was not properly tracked across template branches for JS template literals, leading to possibly incorrect escaping of content when branches were used. Additionally template actions within JS template literals did not properly track the brace depth, le…
-
High 7.5
Go JOSE affect by a panic in JWE decryption
Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.4 and 3.0.5, decrypting a JS…
-
Critical 9.1CVE-2026-33186 Public exploit
gRPC-Go has an authorization bypass via missing leading slash in :path
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests …
-
High 7.0
Docker Desktop Docker Plugins Uncontrolled Search Path Element Local Privilege Escalation Vulnerability
Docker CLI for Windows searches for plugin binaries in C:\ProgramData\Docker\cli-plugins, a directory that does not exist by default. A low-privileged attacker can create this directory and place malicious CLI plugin binaries (docker-compose.exe, docker-build…
-
Critical 9.1
Unexpected session resumption in crypto/tls
During session resumption in crypto/tls, if the underlying Config has its ClientCAs or RootCAs fields mutated between the initial handshake and the resumed handshake, the resumed handshake may succeed when it should have failed. This may happen when a user ca…
-
High 8.6
Potential code smuggling via doc comments in cmd/cgo
A discrepancy between how Go and C/C++ comments were parsed allowed for code smuggling into the resulting cgo binary.
-
High 7.0
OpenTelemetry-Go Affected by Arbitrary Code Execution via PATH Hijacking
OpenTelemetry-Go is the Go implementation of OpenTelemetry. The OpenTelemetry Go SDK in version v1.20.0-1.39.0 is vulnerable to Path Hijacking (Untrusted Search Paths) on macOS/Darwin systems. The resource detection code in sdk/resource/host_id.go executes th…
-
High 7.5
Memory exhaustion in query parameter parsing in net/url
The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encode…
-
High 7.8
Arbitrary file write using cgo pkg-config directive in cmd/go
Building a malicious file with cmd/go can cause can cause a write to an attacker-controlled file with partial control of the file content. The "#cgo pkg-config:" directive in a Go source file provides command-line arguments to provide to the Go pkg-config com…