Archive
19 October 2026
Vulnerabilities first published on this day (UTC), newest first.
444 results · Feed
-
High 8.4
IBM Sterling Connect:Direct for Unix Improper Privilege Management
IBM Sterling Connect Direct for Unix 6.3.0.0 through 6.3.0.7 and 6.4.0.0 through 6.4.0.6 could allow a local attacker to gain elevated privileges due to improper privilege management.
-
High 8.3
Langflow OSS Authorization Bypass Through User-Controlled Key
IBM Langflow OSS 1.0.0 through 1.12.4 contains three message endpoints that perform no ownership verification. Any authenticated user can bulk-delete another user's messages, overwrite message content to inject malicious prompts, or hijack an entire conversat…
-
High 8.8
Security Vulnerability identified in IBM TRIRIGA - GWT Mock Authentication
IBM TRIRIGA Application Platform 5.0.0 through 5.0.8 could allow a remote authenticated attacker to execute arbitrary code due to improper authentication.
-
High 8.8
IBM Verify Identity Access and IBM Security Verify Access Hard-coded Credentials
IBM Verify Identity Access 11.0.3.1 and IBM Security Verify Access 10.0.9.3 Appliance could allow a physically proximate attacker to gain elevated privileges due to the use of hard-coded credentials.
-
Medium 5.4
IBM ContextForge MCP Gateway is affected by server-side request forgery
IBM ContextForge MCP Gateway 0.1.0 through 1.0.5 is vulnerable to a server-side request Forgery (SSRF) that allows authenticated users with gateway creation privileges to perform arbitrary HTTP POST requests to internal network resources and cloud metadata en…
-
Medium 6.5
H3C Magic NX15 usrlist sub_416874 stack-based overflow
A security vulnerability has been detected in H3C Magic NX15 NX15V100R017. This impacts the function sub_416874 of the file /usr/bin/usrlist. Such manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has…
-
Medium 6.5
TS4500 Tape Library Denial of Service
IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 IBM Diamondback Tape Library and IBM Storage TS4500 Library could allow an authenticated user to cause a denial of service using specially crafted SMTP requests that would consume excessive amounts of system…
-
Medium 5.5
TS4500 Tape Library Insufficient Session Expiration
IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 does not invalidate session after a logout which could allow an authenticated user to impersonate another user on the system.
-
Medium 6.3
TS4500 Tape Library Insufficient Session Expiration
IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 IBM TS4500 Tape Library/Diamondback Tape Library does not invalidate session which could allow an authenticated user to impersonate another user on the system.
-
Medium 6.8
TS4500 Tape Library Race Condition
IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 could allow a remote authenticated attacker to gain unauthorized administrative privileges due to a race condition.
-
Medium 5.7
Bluetooth Classic HFP Hands-Free: TX buffer leak on RFCOMM disconnect leads to permanent Bluetooth denial of service
The Bluetooth Classic Hands-Free Profile HF role in subsys/bluetooth/host/classic/hfp_hf.c does not release the AT command buffers that are still queued on hf->tx_pending when the RFCOMM DLC goes down. hfp_hf_disconnected() only cancelled the work items and c…
-
Medium 6.1
Zephyr RTIO syscall verifier validates output parameters for read instead of write access
The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_…
-
Medium 6.6
H3C Magic NX15 upload importprofile path traversal
A weakness has been identified in H3C Magic NX15 V100R017. This affects the function importprofile of the file /api/upload. This manipulation of the argument fileName causes path traversal. It is possible to initiate the attack remotely. The exploit has been …
-
Critical 9.9
H3C Magic NX15 RPC esps write code injection
A vulnerability was determined in H3C Magic NX15 NX15V100R017. Impacted is the function write of the file /api/esps of the component RPC Interface. Executing a manipulation of the argument path can lead to code injection. The attack can be executed remotely. …
-
Medium 6.3
MISP html_to_markdown Module SSRF via Incomplete IP Range Blocking in is_safe_url()
The html_to_markdown expansion module in MISP Modules contains a server-side request forgery (SSRF) vulnerability in its is_safe_url() URL validation function. The BLOCKED_RANGES list used to reject unsafe destination addresses was incomplete, omitting severa…
-
Critical 9.9
H3C Magic NX15 usrlist sub_416874 os command injection
A vulnerability was found in H3C Magic NX15 100R017. This issue affects the function sub_416874 of the file /usr/bin/usrlist. Performing a manipulation results in os command injection. Remote exploitation of the attack is possible. The exploit has been made p…
-
Medium 6.9
Pillow: ReDoS in XbmImagePlugin: 512-byte file stalls Image.open() for minutes
Pillow is a Python imaging library. Prior to 13.0.0, Pillow's XBM header parser is vulnerable to regular-expression denial of service. In XbmImageFile._open, when an application calls Image.open() on a small crafted XBM file, XbmImagePlugin applies a backtrac…
-
Critical 9.2CVE-2026-112900 Public exploit
Pillow: Argument Injection in Ghostscript call, potentially leading into RCE
Pillow is a Python imaging library. From 2.6.0 until 13.0.0, Pillow is vulnerable to argument injection when invoking Ghostscript for EPS input. EpsImagePlugin.Ghostscript passes a caller-controlled input filename after -f without converting it to a safe abso…
-
Medium 6.9
Pillow: Image.quantize() with empty palette leaks uninitialized stack memory
Pillow is a Python imaging library. From 9.1.0 until 13.0.0, Pillow can disclose uninitialized stack memory when Image.quantize() uses an empty palette. ImagingPaletteCacheUpdate() leaves a local cache array uninitialized when the palette has zero entries, an…
-
High 8.7
Pillow: TiffDecode returns uninitialized memory as pixels for short JPEG strips
Pillow is a Python imaging library. From 5.3.0 until 13.0.0, Pillow can return uninitialized memory as pixels when libtiff performs a short decode of JPEG-compressed or Group 4 fax TIFF data. The _decodeStrip and _decodeTile buffers can be larger than the byt…
-
High 8.8
Pillow: TIFF encoder ColorMap plane-size mismatch causes a heap out-of-bounds read
Pillow is a Python imaging library. Prior to 13.0.0, Pillow's TIFF encoder can read beyond a ColorMap buffer when retained TIFF metadata has a plane size inconsistent with BitsPerSample. A small TIFF can be opened normally and then retain a crafted ColorMap t…
-
High 8.7
Pillow: Unbounded recursion parsing a PDF page tree or trailer chain (incomplete fix for CVE-2026-42310)
Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can exhaust resources while parsing an existing PDF during an append operation. PdfParser follows page-tree child references without cycle or duplication tracking and follows previous-trailer…
-
High 8.7
Pillow: Quadratic-time DoS in PDF save_all (PdfParser.next_object_id)
Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow takes quadratic time to reserve PDF object identifiers when saving many frames with save_all enabled. PdfParser.next_object_id() repeatedly rebuilds and scans all previously reserved identifi…
-
High 8.2
Pillow: Invalid free in FreeType glyph rendering when a stroker is active
Pillow is a Python imaging library. From 10.0.0 until 13.0.0, Pillow can free an invalid glyph pointer during FreeType rendering with an active stroker. If FT_Load_Glyph fails, cleanup may call FT_Done_Glyph on an uninitialized or stale glyph variable. An att…
-
Medium 6.3
Dolibarr CSP document.php protection mechanism
A vulnerability has been found in Dolibarr up to 23.0.2. The impacted element is an unknown function of the file htdocs/document.php of the component CSP. Such manipulation leads to protection mechanism failure. The attack can be executed remotely. Upgrading …
-
High 7.8
Gimp: gimp: use-after-free in xcf loader via prop_selected_path
A flaw was found in GIMP. Opening a crafted XCF that selects a path and then fails to load that path can cause a use-after-free in the main process, leading to a crash and potentially arbitrary code execution.
-
High 7.8
Gimp: gimp: use-after-free in xcf loader via prop_linked and prop_selection on channels
A flaw was found in GIMP. The XCF loader can leave a dangling pointer in the linked-channels list when a linked channel is later destroyed via a selection property. Opening a crafted XCF file can cause a use-after-free in the main GIMP process, leading to a c…
-
High 7.8
Gimp: gimp: heap out-of-bounds read/write in psd thumbnail loader (load_resource_1033)
A flaw was found in GIMP. The PSD thumbnail resource loader performs a BGR-to-RGB channel swap with a fixed 3-byte stride and does not verify that the JPEG thumbnail is RGB. A crafted grayscale PSD thumbnail can cause a heap out-of-bounds read and write in th…
-
High 8.7
Pillow: MSP RLE decoder expands a tiny file into unbounded memory
Pillow is a Python imaging library. From 4.1.0 until 13.0.0, Pillow's MSP RLE decoder can expand a small file into an unbounded in-memory buffer. The decoder writes run-length output to BytesIO without limiting expansion to the declared image size. An attacke…
-
Medium 6.9
Pillow: Quadratic GIF comment copying during save
Pillow is a Python imaging library. From 9.2.0 until 13.0.0, Pillow performs quadratic copying when saving a GIF with a long comment. _get_global_header() repeatedly copies portions of comment data while assembling the global header, including comments retain…
-
High 8.7
Pillow: Infinite loop in PdfParser.rewrite_pages on page tree Parent cycle
Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can enter an infinite loop while rewriting PDF pages. PdfParser.rewrite_pages() follows Parent relationships without detecting a cycle in the page tree. An attacker can supply a cyclic PDF to…
-
High 8.0
Netis EAP930 CGI Endpoint debug return200 backdoor
A security vulnerability has been detected in Netis EAP930 1.250905.115454. This issue affects the function return200 of the file /cgi-bin/debug of the component CGI Endpoint. The manipulation of the argument SIGNATURE leads to backdoor. The attack may be ini…
-
High 8.7
Pillow: NULL pointer dereference in Image.merge via an unvalidated band 0
Pillow is a Python imaging library. From 12.0.0 until 13.0.0, Pillow's Image.merge() can dereference a null image8 plane. Validation skips the first input band, allowing a 32-bit integer or floating-point image backed by image32 storage to be merged as a narr…
-
High 8.8
Pillow: OOB read in TiffDecode.c tile and RGBA paths leaks heap memory into pixels
Pillow is a Python imaging library. From 8.1.0 until 13.0.0, Pillow's TIFF tile and RGBA decode paths can read beyond row data produced by libtiff. In _decodeTile and the RGBA unpacker path, when Pillow and libtiff interpret duplicated PhotometricInterpretati…
-
High 7.1
Credential Material Exposure Leading to Unauthorized Streamed Media-Session Access in TP-Link Tapo C210
TP-Link Tapo C210 V3.60 may expose shared credential material and cryptographic metadata through unauthenticated DS JSON API requests. The exposed shared credential can be accepted by the Streamd Digest authentication mechanism as an administrative password, …
-
Medium 5.3
Order-Dependent Authentication Bypass in the DS JSON API in TP-Link Tapo C210
TP-Link Tapo C210 V3.60 contains an authentication bypass vulnerability in the DS JSON API. A crafted JSON request containing both a protected operation and public onboarding-related fields may cause module-level authorization checks to be applied inconsisten…
-
Critical 9.2CVE-2026-112403 Public exploit
Pillow: Heap buffer overflow in ImagingJpegDecode
Pillow is a Python imaging library. Prior to 13.0.0, Pillow's JPEG decoder can write a full-width scanline into a buffer sized for a requested draft scale. ImagingJpegDecode does not verify libjpeg's actual output width and component count after scaling is re…
-
High 8.7
Pillow: Double free in ImagingScaleAffine on calloc failure via Image.transform
Pillow is a Python imaging library. Prior to 13.0.0, Pillow can double free image memory when ImagingScaleAffine encounters a selective allocation failure. The affected fast path handles Transform.EXTENT or pure scale-and-translate Transform.AFFINE operations…
-
High 8.7
Pillow: Out-of-bounds access in _imagingmorph on a zero-width image
Pillow is a Python imaging library. Prior to 13.0.0, Pillow's ImageMorph.MorphOp.apply() can access memory before a row buffer for a zero-width image. PPM and PGM input can create an image with width zero, and the native morphology routine indexes outrow[widt…
-
High 8.2
Pillow: NULL dereference in ImagingExpand via rank filters on zero-size images
Pillow is a Python imaging library. Prior to 13.0.0, Pillow's rank-based filters can dereference invalid image storage for a zero-size image. ImagingExpand() allocates a non-empty output and then faults while replicating edges by reading the first pixel from …